<h3>Job Description</h3>
Job Description
Below mentioned is the job description for your reference:
Job Title: Operator 2, Machine
Duration: 12 Months
Location:&nbsp; Sparks MD 21152-0999
Pay Rate: $18.55/hr/hr on W2
Shift: B shift. The hours are 12hours it is 5:45pm to 6:am the next morning and it is Monday – Wednesday the 1st week and Monday – Thursday the 2nd week.
Description
B shift. The hours are 12hours it is 5:45pm to 6:am the next morning and it is Monday – Wednesday the 1st week and Monday – Thursday the 2nd week.
*** THIS LOCATION IS NOT ACCESSIBLE TO PUBLIC TRANSIT***
Job Overview For Machine Operator 2
<ul>
<li>Performs routine setup, operation, minor routine maintenance, preventative</li>
<li>maintenance (PM) and troubleshooting of moderately complex/automated manufacturing</li>
<li>equipment.</li>
<li>Controls and adjusts machine settings. Inspects in-process parts to ensure</li>
<li>consistent quality and removes defective product, packaging, and component material.</li>
<li>Assists with root-cause analysis activities for process or product exceptions.</li>
<li>Checks work using prescribed gauges, jigs and fixtures to measure close tolerances.</li>
<li>May monitor quality in accordance with statistical process or other control procedures.</li>
<li>Ensures accurate</li>
<li>documentation of all relevant quality, safety, and maintenance documents.</li>
<li>Identifies, troubleshoots, and resolves basic issues associated with the machine performance and/or</li>
<li>product quality.</li>
</ul>
Responsibilities and Duties
<ul>
<li>Works within standards and operating procedures to plan, perform, and make decisions</li>
<li>regarding the set up and operations of a variety of production equipment, including</li>
<li>automated machine processes and controls to perform routine assembly-line</li>
<li>production functions of filling, packing, assembling, labeling and inspecting</li>
<li>Uses independent judgment in troubleshooting and problem solving under general</li>
<li>supervision</li>
<li>May perform clean up functions in sterilized areas</li>
<li>Identifies the need for minor equipment repairs</li>
<li>May analyze and evaluate charts, follows simple diagrams, testing, and inspecting</li>
<li>procedures</li>
<li>Assists with root-cause analysis activities for process or product exceptions</li>
<li>May monitor quality in accordance with statistical process or other control procedures.</li>
<li>Ensures accurate documentation of all relevant quality, safety, and maintenance</li>
<li>documents. Identifies, troubleshoots, and resolves basic issues associated with the</li>
<li>machine performance and/or product quality.</li>
<li>Demonstrates the ability to follow established procedures according to Good</li>
<li>Manufacturing Practices (GMP)</li>
<li>Must follow all BD housekeeping policies and procedures</li>
<li>Must follow all BD safety policies and procedures</li>
<li>Must be able to work overtime as required to meet BD business requirements</li>
<li>Perform other duties as required</li>
</ul>
Qualifications
Minimum Education/Experience:
<ul>
<li>Highschool with 2 years manufacturing experience in a regulated environment (FDA).</li>
<li>Relevant manufacturing experience in Food, Pharma and Industrial manufacturing</li>
<li>preferred.</li>
<li>AA technical degree with 0 years' experience</li>
</ul>
Basic Skills:
<ul>
<li>Can effectively work in a team setting and communicate effectively across the</li>
<li>department</li>
<li>Strong attention to detail</li>
<li>Ability to be punctual in order to ensure production</li>
<li>Ability to work on assignments that are semi-routine in nature with the skill to recognize</li>
<li>any deviations from specification</li>
<li>Ability to operate independently within the constraints of approved process-related</li>
<li>documentation</li>
</ul>
Proficient/Working Skills:
<ul>
<li>Must be proficient in English with the ability to read, write, analyze/evaluate charts,</li>
<li>follow simple diagrams and perform basic arithmetic</li>
<li>Basic proficiency with PCs (Personal Computers) and basic use of a Windows</li>
<li>environment is required.</li>
</ul>

Operator 2, Machine

<h3>Job Description</h3>
Job DescriptionSalary: 
Fusion Technology LLCis in search of experiencedMechanical Engineersin theConstructionfield for contracted workOverseas. Requirements:
<ul>
<li>Minimum of a Secret clearance</li>
<li>Bachelor's Degree in Mechanical Engineering or related field</li>
<li>Minimum of 7 yearsexperience in Mechanical Engineering</li>
<li>Valid Passport</li>
</ul>
 
What youll do:
<ul>
<li>Coordinate</li>
<li>Monitor construction and inspections</li>
<li>Respond to Requests for Information (RFIs)</li>
<li>Control and complete assigned tasks ensuring consistency with project requirements</li>
<li>Interface with and provide subject matter expertise to members of the project team</li>
<li>Use and protect classified materials</li>
<li>Communicate with the Fusion Project Management Office (PMO) in meetings, reporting, and the timely escalation of project issues</li>
</ul>
 
What matters to you matters to us:
 
Fusion Technology values its employees and works hard to ensure proper care for them and their families. We desire to compensate employees in a competitive, motivational, fair, and equitable way with other employers in the marketplace. Salary is only one component of employee compensation but an integral part of recruiting and retaining qualified employees. However, at Fusion Technology, we take a comprehensive approach and consider each employee's needs to tailor a compensation plan that provides financial security and peace of mind.
Our standard competitive package includes a best-in-class matching 401K program, comprehensive Cigna healthcare plan, a competitive employer contribution to a health savings account, vision and dental plans, life insurance, short- and long-term disability, paid personal leave, and paid certifications and training. We recognize that Outside the Contiguous United States (OCONUS)-based employees need additional benefits assistance. That is why Fusion Technology has created an additional package for all our OCONUS-based employees to provide peace of mind, safe travels, and financial stability. The OCONUS benefits package includes:
 
<ul>
<li>International healthcare (including vision and dental)</li>
<li>Paid travel expenses</li>
<li>Meals and Incidental Expenses (M&amp;IE)</li>
<li>Lodging allowances (including visa, immigration, and residence fees)</li>
<li>Completion and vacation incentives</li>
<li>Medivac and DBA insurance</li>
<li>Cost of Living Adjustments (COLA) (when applicable)</li>
<li>Post-Differential and Danger Pay uplifts (when applicable)</li>
</ul>

Mechanical Engineer (OBO)

<h3>Job Description</h3>
Job DescriptionSalary: $18-22 
Company Overview:
Join Mountain Machining, a leader in precision manufacturing! We specialize in producing high quality parts for industries such as aerospace, automotive and firearms. Our team is committed to excellence, innovation and teamwork. We offer multiple benefits, including paid holidays, vacation time, employee pricing on firearms, free firearms demo program, free Desert Tech rifle after every 4 years of employment, education reimbursement, and more.
 
 
Available Shift: 10-hour day shift (Mon-Thurs) 5am-3:30pm
 
Main responsibilities/duties:
 
<ul>
<li>Operation of CNC Mills and Lathes</li>
<li>Regularly inspect parts using a variety of measuring equipment to maintain acceptable quality levels</li>
<li>Ability to understand execute machine tool offsets</li>
<li>Deburr parts as needed</li>
<li>Keep up on regular machine maintenance</li>
<li>Assist machinists in machine setup and teardown</li>
<li>Maintain a clean and organized work space</li>
<li>Keep record of pertinent information for shift change and communicate all important information to your supervisor</li>
<li>Document processes pertaining to running and/or improvements made to setup or operating the machines you run</li>
</ul>
 
Requirements
 
<ul>
<li>Basic math skills</li>
<li>Mechanically inclined</li>
<li>Basic computer skills</li>
<li>Ability to read, follow and understand engineering blue prints (GD&amp;T)</li>
<li>Ability to use measuring equipment</li>
<li>Detail oriented</li>
<li>Willing to work overtime when needed</li>
<li>Pass a background check</li>
</ul>
 
Additional qualities we look for include:
 
<ul>
<li>Good organizational skills</li>
<li>Willingness to adapt with change</li>
<li>Works well in a team environment</li>
<li>Knowledge and experience in Lean manufacturing</li>
<li>Ability to focus on task at hand</li>
<li>Loyalty and dedication</li>
<li>Honest</li>
<li>Positive attitude</li>
<li>Machine maintenance experience</li>
</ul>

CNC Machine Operator

<h3>Job Description</h3>
Job DescriptionJob Description&nbsp;Title ::&nbsp;Electrician/ Industrial ElectricianLocation :: Palm Beach County, FL Duration :: Full Time&nbsp;
Responsibilities:
<ul>
<li>Perform routine inspections and preventive maintenance on electrical systems and equipment.</li>
<li>Diagnose and troubleshoot electrical issues to ensure the reliability of facility operations.</li>
<li>Conduct repairs and replacements of electrical components to maintain optimal system functionality.</li>
<li>Support maintenance and operation of critical systems, including HVAC, refrigeration, steam, and water treatment.</li>
<li>Assist in the installation and calibration of industrial electrical equipment and control systems.</li>
<li>Ensure compliance with safety standards, regulatory requirements, and company procedures.</li>
<li>Collaborate with internal teams and external contractors to oversee electrical projects and repairs.</li>
<li>Maintain accurate records of work performed, materials used, and maintenance activities.</li>
</ul>
Requirements:
<ul>
<li>High school diploma or equivalent required; technical or vocational training/certification preferred.</li>
<li>Minimum 4 years of industrial electrical experience in a manufacturing setting.</li>
<li>Hands-on experience with electrical troubleshooting, repair, and system maintenance.</li>
<li>Familiarity with PLC systems and building automation systems is preferred.</li>
<li>Strong understanding of electrical codes and regulations at local, state, and national levels.</li>
<li>Ability to read and interpret electrical schematics, blueprints, and technical diagrams.</li>
<li>Strong problem-solving skills and ability to work independently when needed.</li>
</ul>

Industrial Electrician

<h3>Job Description</h3>
Job DescriptionSenior Mechanical Engineer (Engineer III)
Location: Oro Valley, AZ Contract Duration: 3 months to 1 year (possible extension) Shift: 1st Shift | Full-Time | 40 hrs/week
About the Role
We’re seeking an experienced Senior Mechanical Engineer (Engineer III) to join our client’s Airframe Systems team in Tucson, AZ. This is a hands-on, senior-level role supporting the design, analysis, and packaging of aerospace hardware for electronic components.
You’ll contribute to the full product lifecycle — from concept design to testing and production — applying advanced mechanical engineering and FEA expertise to develop reliable, high-performance systems.
Key Responsibilities
<ul>
<li>
Lead mechanical design and analysis for electronic packaging of aerospace hardware
</li>
<li>
Create and update 3D/2D CAD models (SolidWorks preferred) for sheet metal, machined, plastic, and cast parts
</li>
<li>
Develop detailed drawing packages, BOMs, assembly docs, and engineering change orders
</li>
<li>
Conduct Finite Element Analysis (FEA) — both structural and thermal (ANSYS preferred)
</li>
<li>
Perform mechanical/environmental testing, weight analysis, and prototype builds
</li>
<li>
Prepare technical reports and present findings clearly to stakeholders
</li>
<li>
Support DFMEA/PFMEA and risk-management reviews
</li>
<li>
Stay current on aerospace packaging technologies, materials, and processes
</li>
<li>
Mentor junior engineers and support process improvement initiatives
</li>
</ul>
Required Qualifications
<ul>
<li>
Bachelor’s degree in Mechanical or Aerospace Engineering
</li>
<li>
8+ years of relevant mechanical design and analysis experience
</li>
<li>
Advanced knowledge of Mechanical Engineering principles
</li>
<li>
Proficiency in 3D CAD (SolidWorks)
</li>
<li>
Proficiency in FEA (ANSYS)
</li>
<li>
Strong analytical and problem-solving skills
</li>
<li>
Excellent written and verbal communication — able to present concepts across all levels
</li>
<li>
Highly organized, detail-oriented, and adaptable to shifting priorities
</li>
</ul>
Preferred / Nice-to-Have
<ul>
<li>
Familiarity with DO-160, DO-178, DO-254, ARP standards
</li>
<li>
Experience in electronics packaging for aerospace or defense applications
</li>
<li>
Proficiency in Microsoft Office (Word, Excel, PowerPoint)
</li>
</ul>

Senior Mechanical Engineer

<h3>Job Description</h3>
Job DescriptionSalary: 
Duties and Responsibilities:
 
 Conduct Detailed Process Analysis: Map and assess current-state workflows to identify inefficiencies, bottlenecks, and opportunities for digitization and automation.
 Design Future-State Digital Workflows: Develop optimized, user-centered digital processes using tools such as SharePoint, Power Automate, or ServiceNow, ensuring alignment with business requirements and technical feasibility.
 Support Change Management Activities: Collaborate with the change management lead to support stakeholder engagement, contribute to training materials, and assist in user onboarding and adoption efforts.
 Collaborate with IT and Business Stakeholders: Work closely with IT teams, business units, and end users to validate requirements, test solutions, and ensure smooth implementation of redesigned workflows.
 Ensure Quality, Compliance, and Continuous Improvement: Validate that new workflows meet data governance, security, and accessibility standards, and contribute to post-implementation reviews to identify areas for refinement.
 
Minimum Qualifications:
 Bachelors or Masters degree in engineering, business process management, or related field 3+ years of experience in process improvement and workflow automation
 Familiarity with Lean Six-Sigma or similar methodologies
 Experience with digital tools and platforms (e.g., SharePoint, ServiceNow, Power Automate, etc.)
**PROXIMITY TO WASHINGTON DC STRONGLY PREFERRED**

Process Engineer

<h3>Job Description</h3>
Job DescriptionSalary: $15ph 
Quality Inspector Job Summary Quality Inspectors perform various sorting, inspection, production, and data capture. Quality Inspectors work in partnership with our customers to contain and improve quality issues in the most efficient way possible. Our vision is to be the Leading Global Provider of Premium Inspection and Quality Assurance Services. We create an atmosphere where we recognize the individual, work together to solve problems, and foster an environment for employee growth. Quality Inspectors work in manufacturing plants, warehouses or other locations where our customers parts are being produced or stored. The location may vary day to day depending on the needs of our customers. Stratosphere Quality teams work collectively to ensure that we are responsive, accountable, and accurate in all aspects of our work. Its important and our people are key to our continued success. Quality Inspector Job Responsibilities &amp; Duties 
<ul>
<li> Performs various sorting, inspection, production, and data entry </li>
<li> Reads and follows work instructions, work rules and directions </li>
<li> Maintains organization and cleanliness of work area </li>
<li> Uses inspection, measuring and test equipment as required </li>
<li> Completes required training classes </li>
<li> Follows all employee policies and other duties as assigned </li>
</ul>
Quality Inspector Job Qualifications &amp; Skills 
<ul>
<li> Flexibility and adaptability </li>
<li> Positive attitude and self-motivated </li>
<li> Detail oriented </li>
</ul>

Quality Inspector

<h3>Job Description</h3>
Job DescriptionDescription: &nbsp; MS&amp;T Specialist Shift Schedule: Monday - Friday 8 am – 5 pm Duration: 1 year contingent assignmentDavie, FL&nbsp;&nbsp;Temp to Perm role: Possibility based on workers performance and openings Core essential skill sets candidates must have to be considered for the role: 1. At least 1 year experience as a MS&amp;T Specialist 2. College fresh PhD with chemistry or college fresh Master’s degree with pharmaceutical sciences or equivalent 3. Basic certifications in areas of Power Platform, AI, Project Management, preferred POSITION SUMMARY This position is responsible for performing activities related to critical aspects of products and processes, including process development, pre-validation and optimization of solid oral dosage forms after Abbreviated New Drug Application (ANDA) filing throughout product launch and commercial lifecycle including process, cleaning and packaging validation. Executes studies with Research and Development (R &amp; D), Laboratory Technical Services (LTS), manufacturing and planning. Maintains expertise related to formulation, raw material properties and manufacturing processes. Identifies, analyzes and suggests corrective actions to optimize procedures, processes, materials, technology and regulatory compliance issues. Digital literacy including basic knowledge of AI (working knowledge of PowerBI, Power Platform, Python and various presentation tools), JMP, R, etc. is necessary. ESSENTIAL AREAS OF RESPONSIBILITY All areas of responsibility listed below are essential to the satisfactory performance of this position by any incumbents with reasonable accommodation if necessary. Any non-essential functions are assumed to be included in other related duties or assignments. • Adapting Operational Excellence (OpEx) initiatives to improve throughput, reduce waste, improve safety of the existing commercial products. Coordinate manufacturing of batches if required and prepare technical reports. • Performing continuous process and cleaning verification, statistical assessments and trend analysis for the development and commercial products. • Performing investigations to identify the root causes and actively seek remediation approaches and implement Corrective and Preventive Actions (CAPAs). • Provide Technical assessments/ product impact assessment summaries on time to avoid back-order situation. • Evaluate the Supplier Material Evaluation team changes (SMET) such as changes to the manufacturing process of Active Pharmaceutical Ingredient (API) or site manufacturing changes for raw materials (API, excipients), cleaning agents and contact surfaces, and packaging components. Coordinate the manufacturing activities and prepare technical reports. • Execute the experimental and process confirmation studies in coordination with planning, manufacturing, quality, LTS and PM groups. • Review and analysis of the analytical and statistical data to support the pre-validation work. Analysis of data to ascertain the data meets protocol and product acceptance criteria: writes deviation reports and technical assessments as required. • Supports pre-validation commercial scale report that includes detailed summary of the equipment and qualified equipment parameters (QEPs) assessment, CPPs and CQAs identified during pre-validation work. • Identify and coordinate the equipment requirements with R &amp; D, Engineering, Employee Health, and Safety (EHS), and PM groups in preparation of Capital Expenditure Request (CER) for the commercial scale pre-validation development/ scale up of the ANDA lots. • Participation in internal (Corporate and QA audits) and external (FDA, MHRA) audits. • Remediation of the audit related observations (if any) and timely completion of the action items (if any) • Maintenance of appropriate documentation of protocols, reports, and laboratory notebooks as required by Standard Operating Procedures (SOPs) and internal policies. • Actively participate in commercial pre-validation and provide technical support to the manufacturing and quality teams as required. • Leading multiple new product introduction, site transfer projects and cleaning validation activities. • Responsible for completing all training requirements and maintaining 100% compliance with all assignments. • Responsible for maintaining work areas and performing job functions in a safe and efficient manner in accordance with company policies and procedures, Good Manufacturing Practices (cGMP’s), and Standard Operating Procedures (SOP’s) and Batch Record instructions. • Responsible for performing additional related duties as assigned. POSITION REQUIREMENTS Any equivalent combination of education, training and/or experience that fulfills the requirements of the position will be considered. Education/Certification/Experience: • Requires a college fresh Ph.D. With chemistry • OR Master’s degree with pharmaceutical sciences or equivalent and a minimum of twelve months relevant experience in the field of MS&amp;T solid oral pharmaceuticals. • Basic certifications in areas of Power Platform, AI, Project Management, preferred Skills/Knowledge/Abilities: • Ability to efficiently handle and troubleshoot pharmaceutical unit operations, such as high shear granulation, dry granulation (slugging and roller compaction), compression, particle, and tablet coating, pan coating and fluid bed coating, encapsulation, laser drill and packaging, cleaning, etc.. • Ability to prepare various types of complex high quality technical documentation (Batch Records (BR), Change Controls (CC), protocols, summary reports, technical assessments, validation reports and deviation/investigation reports etc. • Ability to handle multiple projects, duties, and assignments. • Solving practical problems and considering a variety of concrete variables in situations where only limited standardization exists. &nbsp;

MS&T Specialist II

<h3>Job Description</h3>
Job Description
Hi&nbsp;&nbsp;
Greetings from Smart Folks…!!!
My name is&nbsp;Kumar&nbsp;we have a job opportunity for you as&nbsp;FIS Quantum/Echos Production Support Service Engineer one of our client based&nbsp;at&nbsp;Remote find the Job description below, if you are available and interested, please send us your word copy of your resume with following detail to&nbsp;&nbsp;Or please call me on&nbsp;469 888 5467&nbsp;to discuss more about this position.&nbsp;&nbsp;

Job Title: FIS Quantum/Echos Production Support Service Engineer
Location:&nbsp;Remote
Duration:&nbsp;Full Time
Start Date:&nbsp;ASAP

Job Responsibilities:

Primary Skills: 
5+ years’ experience with FIS Quantum and Echos treasury management systems.

Secondary Skills: 
Proficiency in Oracle/SQL Server database concepts and SQL query authoring. 

Job Description:
<ul>
<li>We are seeking a skilled Service Engineer to provide comprehensive production support for FIS Quantum, FIS Echos, and SWIFT systems, with a focus on integration with Oracle Fusion.</li>
<li>Intercompany, General Ledger and Cash Management. This role requires both financial systems expertise and technical troubleshooting capabilities to ensure seamless treasury operations.</li>
</ul>

Key Responsibilities: Financial Systems Support
<ul>
<li>Provide end-to-end support for FIS Quantum and Echos treasury management systems.</li>
<li>Maintain static data within the Quantum environment to ensure system integrity.</li>
<li>Troubleshoot, fix, and author Enterprise Workflow Framework (EWF) in Quantum including reports and action-based triggers.</li>
<li>Identify and resolve interface issues with bank statements and cashflows.</li>
<li>Configure, troubleshoot, and fix Cash Xplorer functionality.</li>
<li>Support core treasury processes including In-House Banking (IHB), Cash forecasting, and Intercompany Settlement.</li>
<li>Learn internal systems to provide comprehensive end-to-end support to users.</li>
<li>Receive, analyze, and prioritize related support tickets.</li>
<li>Provide timely solutions to users.</li>
<li>Document resolution steps and knowledge base articles.</li>
<li>Support system upgrades and patches.</li>
<li>Monitor system performance and recommend improvements.</li>
</ul>

Technical Operations
<ul>
<li>Apply strong Oracle/SQL Server database expertise to maintain system performance.</li>
<li>Author and optimize SQL queries for data extraction and reporting.</li>
<li>Apply working knowledge of the Quantum data model to troubleshoot complex issues.</li>
<li>Work with Golden Gate and Datapipelines technologies for data integration.</li>
<li>Support integration points between FIS systems and Oracle Fusion AGIS/GL modules.</li>
<li>Utilize FIS ticketing system to manage and track support requests.</li>
</ul>

Governance &amp; Compliance
<ul>
<li>Maintain SOPs, process documentation, and impact assessments for system updates.</li>
<li>Assess readiness for Quarterly Cloud Updates including regression testing to ensure business continuity.</li>
<li>Ensure financial data accuracy, SOX compliance, and internal control adherence.</li>
<li>Participate in change management processes to minimize operational disruptions.</li>
</ul>

Required Qualifications
<ul>
<li>5+ years’ experience with FIS Quantum and Echos treasury management systems.</li>
<li>Hands-on experience in static data maintenance within financial applications.</li>
<li>Proficiency in Oracle/SQL Server database concepts and SQL query authoring.</li>
<li>Experience authoring, troubleshooting and fixing Enterprise Workflow Framework (EWF) in Quantum.</li>
<li>Knowledge of treasury processes including In-House Banking, Cash forecasting, and Intercompany Settlement.</li>
<li>Familiarity with bank statements and cashflow interfaces.</li>
<li>Experience with Cash Xplorer configuration and troubleshooting.</li>
<li>Working knowledge of Golden Gate and Datapipelines technologies.</li>
<li>Understanding of SOX compliance requirements for financial systems.</li>
<li>Experience with FIS support tools including the FIS ticketing system.</li>
<li>This role requires a blend of financial systems knowledge and technical troubleshooting skills to maintain critical treasury&nbsp; management systems and provide exceptional support to business Users.</li>
</ul>

If you are interested in the position, please fill the details:&nbsp;&nbsp;
Full Name

Contact Number&nbsp;

Email Id&nbsp;

DOB (MMDD)&nbsp;

Current location&nbsp;

Visa status&nbsp;

SSN Last 4 Digits

Relocation&nbsp;

Availability for new project&nbsp;&nbsp;

Interview Availability

Highest degree / Completion Year&nbsp;

LinkedIn Id

Rate



Shravan Kumar Kataboina
Team Lead – Talent Acquisition E-mail: <a href="https://www.linkedin.com/in/shravan-kumar-68452513a/" target="_blank">https://www.linkedin.com/in/shravan-kumar-68452513a/</a>
A:&nbsp;
McKinney, Texas (USA. INDIA. Mexico, UK)
P:&nbsp;
(+1)&nbsp;469-888-5467 Ext - 104 F:&nbsp;(940) 461-5979


Smart Folks Inc (A Certified MBE &amp; WBE): Work with the folks, Who are Smart


Book time to meet with me

FIS Quantum/Echos Production Support Service Engineer -- Remote

<h3>Job Description</h3>
Job DescriptionOverview: TekWissen is a global workforce management provider headquartered in Ann Arbor, Michigan that offers strategic talent solutions to our clients world-wide. Our client is the brand name of Deere &amp; Company, an American corporation that manufactures agricultural machinery, heavy equipment, forestry machinery, diesel engines, drivetrains used in heavy equipment, and lawn care equipment. Job Title: Product Verification &amp; Validation EngineerLocation: Fuquay-Varina, NC, 27526Duration: 12 Months Job Type: Contract Work Type: OnsiteVisa sponsorship is not available, now or in the near future, for this position. Job Description:Major Purpose 
<ul>
<li>Performs basic product design, testing and/or analysis work for a defined portion of a project. </li>
<li>Operates in a team environment, providing input to design solutions and participating in design reviews. </li>
<li>Develops recommendations within established guidelines; work and decisions are reviewed by supervisors before implementation. </li>
</ul>
Major Duties 
<ul>
<li>Carry out a range of activities under the guidance of more senior colleagues to support the analysis of information and the specification of the methods and process steps, as well as the plant, machinery, and equipment, required to design and continuously improve manufacturing or materials processes and process systems. </li>
<li>Contribute to the development of, and implement feasibility testing of, proposed engineering solutions to provide feedback and data to validate the design. </li>
<li>Carry out a range of activities under the guidance of more senior colleagues to support the drafting of engineering standards and specifications and the evaluation of the effectiveness of those standards. </li>
<li>Carry out inspections under the supervision of senior colleagues to evaluate the quality of engineering works and/or the integrity of existing installations or structures, and make recommendations to senior colleagues on the remedial works needed to ensure conformance with specifications and regulatory requirements. </li>
<li>Identify shortcomings in existing processes, systems, and procedures, and use established change management programs to address them. </li>
<li>Work within an established project management plan to achieve specific goals. </li>
<li>Develop own capabilities by participating in assessment and development planning activities as well as formal and informal training and coaching; gain or maintain external professional accreditation, where relevant, to improve performance and fulfill personal potential. </li>
<li>Maintain an understanding of relevant technology, external regulation, and industry best practices through ongoing education, attending conferences, and reading specialist media. </li>
<li>Work collaboratively with other professional teams and over organizational boundaries to ensure service users experience cohesive and seamless support to meet their needs. </li>
<li>Create and maintain technical and/or user documentation to a high standard, and back up files to ensure instant recovery if problems occur. </li>
</ul>
Skills, Abilities, Knowledge 
<ul>
<li>Works with guidance (but not constant supervision) to get results using new and advanced engineering technologies. </li>
<li>Works with guidance (but not constant supervision) to execute engineering designs using the appropriate methods, tools, processes and software. </li>
<li>Works with guidance (but not constant supervision) to achieve engineering development targets using appropriate methods, tools, processes and software. </li>
<li>Works with guidance (but not constant supervision) to produce technical engineering specifications and related materials. </li>
<li>Works with guidance (but not constant supervision) to test, evaluate and improve engineering outcomes. </li>
<li>Builds engineering solutions with guidance (but not constant supervision). </li>
<li>Works with guidance (but not constant supervision) to implement engineering designs, evaluate outcomes and then make improvements as needed. </li>
<li>Manages and applies safe systems of work with guidance (but not constant supervision). </li>
<li>Uses clear and effective verbal communications skills without supervision and provides technical guidance when required on expressing ideas, requesting actions and formulating plans or policies. </li>
<li>Works with guidance (but not constant supervision) to develop appropriate plans or perform necessary actions based on recommendations and requirements. </li>
<li>Works with guidance (but not constant supervision) to identify, assess, prioritize and manage project-related risks. </li>
<li>Works with guidance (but not constant supervision) to measure and report progress toward intermediate targets to make sure a project stays on track to achieve its ultimate goals. </li>
<li>Works at an intermediate level to identify, verify, and manage changes to the scope of the project or program, utilizing the most appropriate approach. </li>
<li>Typically works with guidance. </li>
<li>Works under guidance (but not constant supervision) to analyse data trends for use in reports to help guide decision making. </li>
<li>Works with full competence to identify assumptions in order to manage risk, assess the success with measurable evaluation criteria, and evaluate alignment of requirements with solution scope to support value delivery. </li>
<li>Typically works without supervision and may provide technical guidance. </li>
<li>Works with full competence to create the rules for requirements and design quality, perform verification activities, and maintain quality control. </li>
<li>Typically works without supervision and may provide technical guidance. </li>
<li>Works with guidance (but not constant supervision) to manage projects and/or programs within desired cost, time and quality parameters. </li>
<li>Works at an intermediate level to build the structure and culture of the project team, and define roles and responsibilities within that structure to enable the achievement of project mission and objectives and the effective operation of key business processes. </li>
<li>Typically works with guidance. Education? Bachelor's Degree or Equivalent Level </li>
<li>A Product Verification &amp; Validation Engineer ensures that prototype components and machines meet durability and performance requirements at key stages of the Product Development Process. </li>
</ul>
Duties: 
<ul>
<li>Decides upon appropriate tests to ensure durability and performance of new designs, developing new tests when necessary. </li>
<li>Executes test plan by conducting simple tests and assigning in-depth work to mechanics, lab engineers, field test sites, and structural analysts. </li>
<li>Leads the team through root cause investigations and data gathering when prototypes fail tests. </li>
<li>Applies mechanical and electrical engineering aptitude to assist design engineers, participate in design reviews, gather the right data, and design tests. </li>
<li>Learns company products and develops customer understanding to become a "voice of the customer" and plan tests that accurately represent customer usage. </li>
<li>Benchmarks performance and capabilities of company products against competitor products. </li>
<li>Remains highly organized while managing multiple tasks and data streams. </li>
<li>Interacts effectively with technical professionals across a variety of job roles and backgrounds, including teammates across the country or across the world. </li>
<li>Communicates technical and non-technical information clearly and concisely with peers and leadership in written and verbal forms. </li>
</ul>
Business case: 
<ul>
<li>With reduction of head count from SIRD VolSep, current staffing levels within the PVV Planning / Reliability Engineering group are not sufficient to cover all projects being proposed. </li>
<li>An additional engineer is needed to support the planning and execution of virtual analysis, laboratory testing, and field testing of prototype machines for the Commercial Mowing product family. </li>
</ul>
Position title: 
<ul>
<li>Product Verification &amp; Validation Engineer </li>
</ul>
Specific position requirements: 
<ul>
<li>4-year engineering degree preferred (or equivalent work experience). </li>
<li>Engineering student in process with immediate upcoming graduation will be considered. 1st shift position, business casual dress code. </li>
<li>Safety shoes required (internal metatarsals with no flap over laces) for the first day. </li>
</ul>
What skills you need: - 
<ul>
<li>Hands on skills and aptitude with mechanical, hydraulic and/or electrical systems </li>
</ul>
Confidential with no Personal Information - 
<ul>
<li>Strong problem solving skills </li>
<li>Strong leadership and people skills </li>
<li>Basic engineering design experience using CAD (Creo/ProE preferred) - </li>
<li>Understanding of the importance of each phase of product development (scoping, design, analysis, testing, customer feedback, and manufacturing) </li>
<li>Ability to analyse complex data, draw conclusions, and make recommendations </li>
<li>Ability to communicate within a cross functional team across multiple sites and drive results </li>
<li>Ability to write clearly and concisely to document test procedures and communicate results </li>
<li>Willingness and ability to travel domestically to support field tests, loads collection, etc. </li>
</ul>
What makes you stand out: 
<ul>
<li>Industry experience with mechanical systems, electrical systems, or data analysis </li>
<li>Industry product development experience and knowledge of the process </li>
<li>Project management experience (planning and execution) </li>
<li>Experience with digital data acquisition systems and sensors (e.g. thermocouples, strain gauges, pressure sensors, etc.) </li>
<li>Experience with statistics or Six Sigma </li>
<li>Experience with commercial mowers, riding mowers, golf course maintenance equipment, or tractors </li>
</ul>
TekWissen Group is an equal opportunity employer supporting workforce diversity.

5,913 Manufacturing Jobs in Young America Township