<h3>Job Description</h3>
Job Description
Responsibilities: Synectic Solutions is currently recruiting for an&nbsp;Engineering Technician VI&nbsp;to support Systems Engineering Department at Patuxent River Naval Air Station in Lexington Park, MD.&nbsp; The program is providing systems engineering support of weapons systems on various platforms including technical research and development of technologies, analysis, and documentation as part of the acquisition of Aircraft, Weapon, and Integrated Systems and the evaluation of their technical performance, mission suitability and associated acquisition risks throughout the full acquisition process and lifecycle of a program.&nbsp; &nbsp; Responsibilities:
<ul>
<li>Prepares designs and specifications for various complex equipment or systems (a heating&nbsp;system in an office building or new electronic components such as solid-state devices for instrumentation equipment).</li>
<li>Plans the approach to solve design problems; conceives and recommends new design techniques. Resolves design problems with contract personnel; and assures compatibility of design with other parts of the system.</li>
<li>Designs and coordinates test set-ups and experiments to prove or disprove the feasibility of preliminary design; uses untried and untested measurement techniques; and improves the performance of the equipment.</li>
<li>May advise equipment users on redesign to solve unique operational deficiencies.</li>
<li>Plans the approach and conducts various experiments to develop equipment or systems.
<ul>
<li>
<ul>
<li>(a) difficult performance requirements because of conflicting attributes such as versatility, size, and ease of operation; or (b) unusual combination of techniques or components</li>
</ul>
</li>
</ul>
</li>
<li>Arranges for fabrication of pilot models and determines test procedures and design of special test equipment.</li>
</ul>
Requirements
<ul>
<li>Position requires a Technical or Scientific AA or AS degree. Allowable substitution: High School diploma or GED and three (3) years of recent and relevant experience.&nbsp;</li>
<li>At least ten (10) years of recent and relevant experience in a position related to the labor category description. Eight (8) years of experience in installation of hardware and or equipment. Four (4) years of experience in design and preparation, and modification of engineering documents and drawings. Experience may be concurrent.</li>
<li>Candidate must hold an active DoD secret clearance.</li>
<li>Must be able to pass a background investigation.</li>
<li>Candidate must be a US Citizen.</li>
</ul>
 What Your Experience Working for Us Will Be Like&nbsp; Ask any of our employees and they will tell you SSI is a great place to work with an upbeat and positive culture. We take pride in our work to continuously improve on our performance in a manner that enhances the mission of the agencies we serve while expanding opportunities for our employees and our company.&nbsp; About Synectic Solutions, Inc. (SSI)&nbsp; Synectic Solutions, Inc. (SSI), is an award-winning, 20-year government contracting agency focused on the areas of logistics, engineering, management, and information technology. SSI is a growing organization committed to exceeding customer expectations, to continually improving all products, services, and processes, and to perform all work with the commitment to upholding the highest standards and ethics.&nbsp;&nbsp; Ready to apply?&nbsp;&nbsp; If this job sounds like a fit for you, then click on the ‘apply’ button below. Good luck!&nbsp;
Powered by JazzHR
oDz7dSSOeY

Engineering Technician VI (SED)

<h3>Job Description</h3>
Job DescriptionBenefits: 
<ul>
<li>401(k)</li>
<li>401(k) matching</li>
<li>Dental insurance</li>
<li>Health insurance</li>
<li>Paid time off</li>
<li>Vision insurance</li>
</ul>
 About AID AID is a growing yet established consulting firm located in central New Jersey, offering professional services in non-destructive testing and evaluation (NDT/NDE) of highway infrastructure (bridges and pavements), pavement evaluation and design, geotechnical design and subsurface investigation, subsurface and utility mapping, and forensic studies. AID owns and operates an array of NDT equipment, including a Laser Crack Measurement System (LCMS), Falling Weight Deflectometer (FWD), various air-launched and ground- coupled Ground Penetrating Radar (GPR) antennas, and many others such as a high-speed profiler and walking profilers. In addition, AID runs its own soils, asphalt, and concrete materials testing laboratory. Job Description This full time Field Engineering Assistant position will primarily involve geophysical/electronic location and designation of subsurface utilities using surface geophysical equipment, including RF Pipe and Cable Locators, Ground Penetrating Radar, electromagnetic induction devices, record research, and documenting the work through the preparation of sketches, spreadsheets, and written reports. The ability to work minimal supervision is required. The ideal candidate should be prepared to work in the field, performing both utility mark out (locating, subsurface utility evaluation) and geophysical surveying activities. This position also entails office work, including, but not limited to, assisting with proposal and invoice preparation, using geophysical equipment software to interpret field data, and providing written reports with findings as well as presenting findings on CAD maps/plans. The candidate will perform this work mostly under the supervision of a senior engineer. The potential candidate must be open to work during day/night shifts and occasionally on the weekends. He/she will also be expected to assist in other areas of work, as needs dictate. Working in other NDT areas might be expected. This position will involve increasing responsibility, based on his/her performance and the needs of the company. Salary: $60,000/yr - $78,000/yr, depending on experience and credentials. Qualifications Minimum Qualifications 
<ul>
<li>Associate degrees in engineering, geotechnical or physics fields.</li>
<li>Proficiency of AutoCAD and basic knowledge of Civil 3D.</li>
<li>Proficiency in computer and MS office</li>
<li>Excellent communication skills, both written and verbal, with the ability to present complex information clearly and effectively.</li>
<li>Strong organizational skills and the ability to manage multiple tasks and deadlines.</li>
<li>Able to carry 50 Ib of equipment.</li>
</ul>
 Preference Qualifications 
<ul>
<li>Bachelors degrees in geotechnical or physics fields. Bachelors degree in civil engineering is a plus.</li>
<li>2 years of experience in Civil Engineering fields</li>
<li>Any experience in NDT and SUE fields is a plus</li>
<li>Familiarity with CI/ASCE 38-22 standards and technical utility investigation is a plus.</li>
<li>Familiarity in geophysical testing and analysis methods, including EMI and GPR is a plus.</li>
</ul>
To apply, send your resume to the following email with the subject: Engineering Assistant: <a href="mailto:jobs@aidpe.com" target="_blank">jobs@aidpe.com</a> Job Site: This is a full time in person job. Prospective candidates should be able to commute or relocate to the Township of Hamilton, NJ, 08691.

Engineering Assistant

<h3>Job Description</h3>
Job Description
Engineering Technician I – V – NSWCPD Code 316
Salary Grade/Level/Family/Range
Jacksonville / Mayport
Technician I: $17.66/hour
Technician II: $19.82/hour
Technician III: $22.17/hour
Technician IV: $27.46/hour
Technician V: $33.59/hour
Up to an additional $5.09/hour health &amp; welfare, depending on benefit enrollment
 
Kings Bay, GA
Technician I: $17.14/hour
Technician II: $19.24/hour
Technician III: $21.52/hour
Technician IV: $26.66/hour
Technician V: $32.61/hour
Up to an additional $5.09/hour health &amp; welfare, depending on benefit enrollment
 
Company Overview:
KMS Solutions, LLC is a technical management / solutions company that specializes in engineering, analysis, and cyber security. Founded in 2005, KMS is a certified small business with nearly two decades of experience supporting the Department of Defense as well as many other departments and programs critical to our Nation’s security and well-being. 
KMS is a two-time winner of the USA Today Top Workplaces recognizing quality workplace cultures across the United States who put their employees first. Additionally, we received the Providence Journal Rhode Island Top Workplaces award and Culture Excellence Awards for Compensation &amp; Benefits, Innovation, Leadership, Purpose &amp; Values and Work-Life Flexibility
Position Summary / Objective:
The Naval Surface Warfare Center Philadelphia Division (NSWCPD) is a Department of Defense entity responsible for research and development, test and evaluation, engineering, and Fleet support services for the Navy’s ships, submarines, military watercraft, and unmanned vehicles. This position supports NSWCPD Code 316, which is responsible for the Planned Maintenance System (PMS)/Class Maintenance Plan (CMP), Reliability Centered Maintenance (RCM) and PMS Service Request (PSRs), review of New Construction PMS Contract Deliverables, and PMS update and development for in-service, modernization, new construction, and land-based engineering test site maintenance documents.
Essential functions:
Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions.
<ul>
<li>Review Engineering and technical documentation to determine compliance with engineering standards, technical accuracy, and adequacy in relation to functional, operational, and technical requirements.</li>
<li>Perform engineering analysis, reviews, studies and provide recommendations related to the development, interoperability, integration, operations, and use of Maintenance Standards during system, subsystem, and equipment maintenance.</li>
<li>Collaborate with the customer and various organizations, offering in-depth research and data analysis to improve engineering documentation and provide informed technical feedback.</li>
<li>Assist in reviewing, tracking, and analyzing Fleet feedback (e.g., Maintenance Index Pages (MIPs), Maintenance Requirement Cards (MRCs), LARS, TFBRs, and LARs) related to machinery systems.</li>
<li>Support engineering teams in updating PMS documentation based on in-service reliability and maintenance data.</li>
<li>Provide technical input for the development and modification of Integrated Logistics Support (ILS) products, including technical manuals, maintenance plans, and provisioning documentation.</li>
<li>Use Navy databases and tracking tools (e.g., CDMD-OA, SKED, OMMS-NG, TDMIS) to retrieve and validate logistics and maintenance data.</li>
<li>Participate in Failure Review Boards, Technical Feedback Reviews, and support the analysis of failure trends.</li>
<li>Draft reports and documentation related to PMS changes, logistics deficiencies, or process improvements.</li>
<li>Collaborate with engineers, logisticians, and program office staff to address shipboard maintenance and support issues.</li>
<li>Provide administrative functions for program efforts in special situations including, but not limited to meetings, and preparing/maintaining history files.</li>
</ul>
Required education and experience:
<ul>
<li>High School Diploma or Accredited GED equivalent.</li>
<li>Bachelor of Science (or higher) in Mechanical Engineering may be substituted for relevant experience requirement.</li>
<li>Required years of professional experience as an Engineering Technician:
<ul>
<li>Engineering Technician I - Entry Level</li>
<li>Engineering Technician II - 1 year</li>
<li>Engineering Technician III - 3 years</li>
<li>Engineering Technician IV - 7 years</li>
</ul>
</li>
</ul>
Preferred education and experience:
<ul>
<li>Bachelor of Science (or higher) in Mechanical Engineering.</li>
<li>Familiarity with Maintenance Standards and Hull, Mechanical, and Electrical (HM&amp;E) systems is a plus.</li>
<li>Current or recent shipyard and maintenance availability experience and be familiar with availability work packages and tracking metrics.</li>
<li>Experience as a PQS Worker, Work Center Supervisor, or 3M Coordinator within the Navy’s maintenance system.</li>
<li>Familiarity with the Navy’s PMS and ILS concepts.</li>
<li>Familiarity with engineering documentation standards and quality assurance practices.</li>
<li>Experience with Ship Maintenance and Logistics databases (e.g., SKED, OMMS-NG, TDMIS, CDMD-OA).</li>
<li>Knowledge of Configuration Management (CM) and life-cycle support concepts.</li>
<li>Technical writing experience, particularly with maintenance or logistics documentation.</li>
<li>Adept at learning new systems and terminology.</li>
</ul>
Competencies:
<ul>
<li>Proficiency in Microsoft Office, specifically, Word, Excel, PowerPoint, and Outlook software.</li>
<li>Excellent verbal and written communication skills, as well as presentation skills.</li>
<li>High comfort level working with and around all military/organizational levels, clients, customers, suppliers, and visitors.</li>
<li>Must be highly reliable and demonstrate personal initiative to operate in a fast-paced environment with changing priorities.</li>
</ul>
Additional eligibility requirements
Work authorization/security clearance requirements:
Active Secret clearance is required.
Other Duties:
Please note this job posting is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.
Supervisory Responsibility:
None
Work Environment:
This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, and photocopiers.
Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
While performing the duties of this job, the employee is regularly required to talk or hear. Excellent listening skills are essential. The employee frequently is required to stand, walk, use hands to finger, handle or feel, and reach with hands and arms. Must be able to lift up to 20 lbs.
Position Type/Expected Hours of Work:
The typical workday is eight hours in length. Some flexibility in hours is allowed, with concurrence from the supervisor. Attendance at prescheduled mandatory meetings is required. Must be available during the core work hours as determined by your contract/location and must account for the required number of hours in a pay period to maintain Full-time status.
Telework:
<ul>
<li>Situational telework may be allowed for this position subject to customer requirements/expectations.</li>
</ul>
Travel:
<ul>
<li>Ability to travel CONUS; potential to travel OCONUS </li>
<li>Travel up to 10% may be required</li>
</ul>
Benefits and Additional Compensation:
KMS offers a competitive benefits package including medical, dental and vision insurances, flexible spending account, PTO, paid holidays, military leave, bereavement leave, 401k / retirement savings plan, professional development and tuition reimbursement, basic and voluntary life insurance / AD&amp;D, short-term and long-term disability, voluntary AFLAC supplemental insurance products and employee assistance plan (EAP) program. Additionally, KMS offers employee referral bonuses and a discretionary annual bonus.
AAP/EEO Statement:
KMS Solutions provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.
KMS Solutions is a drug free workplace.
 
#ZR
#LI-KMS

Engineering Technician I - V - NSWCPD Code 316

<h3>Job Description</h3>
Job DescriptionCompany Description 
Visa is a world leader in payments and technology, with over 259 billion payments transactions flowing safely between consumers, merchants, financial institutions, and government entities in more than 200 countries and territories each year. Our mission is to connect the world through the most innovative, convenient, reliable, and secure payments network, enabling individuals, businesses, and economies to thrive while driven by a common purpose – to uplift everyone, everywhere by being the best way to pay and be paid.
Make an impact with a purpose-driven industry leader. Join us today and experience Life at Visa.
Job Description 
Essential Functions
<ul>
<li>
Lead and mentor a team of engineers focused on developing advanced AI and machine learning solutions.
</li>
<li>
Design, implement, and optimize low latency and high throughput systems that are highly available and scalable.
</li>
<li>
Drive architecture decisions and best practices for deploying machine learning models into production environments.
</li>
<li>
Collaborate with data scientists, engineers, and product managers to deliver robust AI-powered applications.
</li>
<li>
Ensure systems are monitored and maintained for performance, reliability, and security.
</li>
<li>
Utilize orchestration tools such as Kubernetes and Nomad for container management and deployment.
</li>
<li>
Work with fast data stores and high-performance messaging systems, including Rust and Aeron.
</li>
</ul>
This is a hybrid position. Expectation of days in office will be confirmed by your hiring manager.
Qualifications 
Basic Qualifications 10 or more years of work experience with a Bachelor’s Degree or at least 8 years of work experience with an Advanced Degree (e.g. Masters/ MBA/JD/MD) or at least 3 years of work experience with a PhD Preferred Qualifications Bachelor's or Master’s degree in Computer Science, Engineering, or a related technical field. Ideal candidates will have 12 to 15 years of professional experience in machine learning engineering or related fields, demonstrating a strong track record of leadership and technical expertise. This extensive experience should include hands-on work with advanced algorithms, successful project delivery, and mentoring junior engineers. Extensive hands-on experience building and deploying machine learning applications in production environments. Proven track record of leading or driving engineering teams to successful project delivery. Solid understanding of system design for low latency, high throughput, and highly available applications. Experience with container orchestration tools such as Kubernetes and Nomad. Expertise in monitoring and maintaining production systems for reliability and performance. Strong programming skills with a focus on Rust and experience with high-performance messaging systems like Aeron. Familiarity with fast data stores and distributed systems architecture. Excellent communication and collaboration skills. Ability to thrive in a fast-paced, team-oriented environment. Experience in the financial technology sector or with payment systems. Knowledge of additional orchestration and monitoring tools. Contributions to open-source projects or published work in machine learning or distributed systems. Familiarity with cloud computing platforms.
 Additional Information 
Work Hours: Varies upon the needs of the department.
Travel Requirements: This position requires travel&nbsp;5-10% of the time.
Mental/Physical Requirements: This position will be performed in an office setting.&nbsp; The position will require the incumbent to sit and stand at a desk, communicate in person and by telephone, frequently operate standard office equipment, such as telephones and computers.
Visa is an EEO Employer.&nbsp; Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.&nbsp; Visa will also consider for employment qualified applicants with criminal histories in a manner consistent with EEOC guidelines and applicable local law.
Visa will consider for employment qualified applicants with criminal histories in a manner consistent with applicable local law, including the requirements of Article 49 of the San Francisco Police Code.
U.S. APPLICANTS ONLY: The estimated salary range for a new hire into this position is 215,300.00 to 312,300.00 USD per year, which may include potential sales incentive payments (if applicable). Salary may vary depending on job-related factors which may include knowledge, skills, experience, and location. In addition, this position may be eligible for bonus and equity. Visa has a comprehensive benefits package for which this position may be eligible that includes Medical, Dental, Vision, 401 (k), FSA/HSA, Life Insurance, Paid Time Off, and Wellness Program.

Lead ML Engineer

<h3>Job Description</h3>
Job DescriptionSalary: 
About FusionICS, LLC
At Fusion,we specialize in mission-critical engineering, infrastructure, and IT solutions for federal and defense organizations. As a Service-Disabled Veteran-Owned Small Business (SDVOSB), we bring a commitment to excellence, security, and innovation to every project.
Our team of elite engineers and technical experts is dedicated topowering the future of secure facilities by providing cutting-edge engineering solutions. When you join Fusion, you become part of a company that valuestechnical expertise, collaboration, and a commitment to national security.
We look forward towelcoming you to our team and working together to support mission-critical operations across government and defense installations.
Position Summary:
Fusion is seeking a highly skilledEngineering Technician to provide technical oversight of construction contracts, quality control, and infrastructure compliance. The Engineering Technician will support public works operations, infrastructure assessments, cost estimation, and project management to ensure adherence to safety regulations, contractual requirements, and engineering standards. This role requires field inspections, contractor evaluations, and collaboration with government personnel to support mission-critical projects. The ideal candidate will haveexperience working in federal government environments, and the ability to operate within a Top Secret security framework.
Key Responsibilities:
Construction Oversight &amp; Quality Assurance
<ul>
<li>Review and enforce construction contract provisions, including quality control and safety requirements.</li>
<li>Conduct site inspections to evaluate conditions, recommend improvements, and oversee contractor execution.</li>
<li>Ensure projects comply with federal, DoD, and engineering standards for safety and performance.</li>
<li>Provide technical evaluations of contractor proposals, invoices, and modifications.</li>
<li>Manage the three-phase control quality management process to verify compliance at all project stages.</li>
</ul>
Project Management &amp; Cost Estimation
<ul>
<li>Assist in project budgeting, cost estimation, and contract modifications.</li>
<li>Monitor project schedules, milestones, and deliverables to ensure timely completion.</li>
<li>Provide technical guidance on infrastructure repairs, upgrades, and modernization efforts.</li>
<li>Support risk assessments and contingency planning for facility infrastructure projects.</li>
</ul>
Collaboration &amp; Compliance
<ul>
<li>Work closely with engineers, contractors, and government officials to ensure project alignment with mission objectives.</li>
<li>Ensure construction activities adhere to environmental, safety, and federal regulations.</li>
<li>Develop and maintain technical reports, engineering documentation, and compliance records.</li>
<li>Participate in meetings, site briefings, and contract performance reviews to provide technical insight.</li>
</ul>
Qualifications &amp; Requirements:
Education &amp; Experience:
<ul>
<li>Bachelors degree (B.S.) in Engineering, Construction Management, or a related field (preferred).</li>
<li>3+ years of experience in engineering, construction quality control, or infrastructure management.</li>
<li>Experience with DoD construction projects, military facilities, or government contracting preferred.</li>
</ul>
Certifications &amp; Technical Skills:
<ul>
<li>Active Construction Quality Management for Contractors (CQM-C) certification.</li>
<li>Strong knowledge of civil, mechanical, and electrical construction principles.</li>
<li>Familiarity with federal construction regulations, NEC, OSHA, and safety compliance standards.</li>
<li>Proficiency in Microsoft Office, AutoCAD, and project management software.</li>
</ul>
Security Clearance Requirement:
<ul>
<li>Active Top Secret (TS) clearance required.</li>
<li>Must be able to obtain and maintain clearance at the necessary level for assigned duties.</li>
</ul>
Salary &amp; Benefits:
Compensation:
<ul>
<li>Base Salary: Competitive, based on experience and security clearance level.</li>
<li>Annual Review: Compensation is reviewed annually as part of FusionICS' performance and salary review process.</li>
</ul>
Benefits Package:
<ul>
<li>Medical &amp; Retirement Plans: Eligible to participate in medical insurance and 401(k) retirement plans with a 4% company match.</li>
<li>Paid Time Off: Employees accrue 120 hours (15 days) of vacation per year.</li>
<li>Sick Leave: Employees receive 5 days of sick leave per year.</li>
<li>Federal Holidays: FusionICS provides 11 paid holidays per year.</li>
</ul>
Work Conditions &amp; Physical Requirements:
<ul>
<li>Ability to work in high-security environments requiring strict access controls and security protocols.</li>
<li>Work in indoor and outdoor environments, including near high-voltage switchgear and substations.</li>
<li>Requires lifting/carrying up to 50 lbs, climbing ladders, and working in confined spaces.</li>
<li>Occasional travel to other sites or campuses as needed.</li>
</ul>

Engineering Technician (TS Clearance)

<h3>Job Description</h3>
Job Description
Essential Duties &amp; Responsibilities
<ul>
<li>Engineering &amp; Technical Support</li>
<ul>
<li>Assist corporate and site engineers in preparing detailed mine plans, layouts, design drawings and permit applications for active and proposed operations.</li>
<li>Maintain centralized files of permit applications, maps, engineering drawings, and technical documentation for all operations.</li>
<li>Support engineering teams in analyzing mine progress and projections to provide consistency with permitting activities.</li>
</ul>
<li>Permitting &amp; Regulatory Support</li>
<ul>
<li>Prepare maps, exhibits, and technical drawings for state and federal permit applications, renewals, and revisions.</li>
<li>Work closely with the Environmental and Permitting Departments to ensure permit drawings meet regulatory standards (WVDEP, KY DNR, OSMRE, MSHA).</li>
<li>Track and organize permit boundaries, acreage totals, and affected areas using GIS and CAD-based mapping tools.</li>
<li>Verify permit consistency with operational mine plans and assist in resolving discrepancies.</li>
<li>Support the preparation of responses to regulatory inquiries or inspection requests with accurate engineering documentation.</li>
</ul>
<li>Cross-Functional Coordination</li>
<ul>
<li>Collaborate with mine-site engineers, surveyors, and environmental staff to ensure consistent data collection and map updates.</li>
<li>Support Legal, Land, and Environmental departments by producing technical exhibits for lease agreements, boundary verifications, and reclamation plans.</li>
<li>Assist corporate management in technical presentations, reports, and internal audits.</li>
<li>Serve as a resource for troubleshooting technical CAD or mapping issues across the company.</li>
</ul>
<li>Compliance &amp; Quality Assurance</li>
<ul>
<li>Maintain all mapping and engineering documentation in accordance with MSHA, OSMRE, and state regulations.</li>
<li>Participate in internal audits and quality reviews of engineering and permit maps.</li>
<li>Ensure timely updates of operational changes to prevent discrepancies in regulatory filings.</li>
<li>Handle confidential property and operational data in a professional and secure manner.</li>
</ul>
</ul>
Qualifications
<ul>
<li>Associate or Bachelor’s degree in Mining Engineering Technology, Civil Engineering Technology, or a related field; equivalent work experience in mining engineering, mapping, or permitting will be accepted in lieu of a degree.</li>
<li>3–7 years of experience in engineering, mapping, or permitting support within the mining industry.</li>
<li>Proficiency in AutoCAD, Civil 3D, and GIS platforms; experience with mine planning or permitting software preferred.</li>
<li>Strong understanding of mining permitting processes (WVDEP, KY DNR, OSMRE, MSHA).</li>
<li>Working knowledge of both surface and underground mining operations.</li>
<li>Excellent organization and communication skills with the ability to manage multiple priorities across sites.</li>
<li>High attention to detail, with demonstrated accuracy in technical drawings and data management.</li>
</ul>

Engineering Specialist

<h3>Job Description</h3>
Job Description
PHASOR USA LLC. is a subsidiary of Quanta Services specializing in engineering, design, and testing / commissioning of medium to high voltage electrical facilities. Focused on providing the most cost-effective and efficient solutions to power system engineering, we are involved in a diverse range of projects from preliminary engineering through to the commissioning and startup.
 We are currently seeking a highly motivated and experienced Lead Commissioning Engineer / Commissioning Manager to join our field services team on a full time basis, initial work sites will be based around the Denver, CO area. If you are an excellent communicator and skilled problem-solver with strong attention to detail, we offer a dynamic work environment where you will be continuously challenged in all aspects of the testing and commissioning process.
As a condition of employment, successful applicants agrees to undergo a Backcheck screening, which includes identity verification and a criminal background check.
Responsibilities:
<ul>
<li>Leading a team in the testing and commissioning of power system protection &amp; control schemes in the utility, power generation, and oil &amp; gas industry.</li>
</ul>
<ul>
<li>Testing and commissioning of MV/HV power system protection &amp; control schemes in the utility, power generation, and oil &amp; gas industry.</li>
<li>Read and interpret drawings and troubleshoot / resolve technical issues.</li>
<li>Train/develop employees to ensure highest performance standards are met.</li>
<li>Report preparation and submission.</li>
<li>Assist with generation of commissioning startup procedures or work instructions.</li>
<li>Ensure compliance with all safety practices as per corporate, client, and industry standards.</li>
<li>Initiate and/or respond to customer inquiries, discuss trouble details and confirm resolutions.</li>
</ul>
Qualifications:
<ul>
<li>The successful candidate should possess a Bachelor’s Degree in Electrical Engineering, Power Systems Electrician Journeyman Ticket, or an Electrical Engineering Technologist Diploma from a recognized institute.</li>
<li>Comprehensive understanding of key principles of electrical power system protection and controls including SCADA, relay protection, metering, equipment functionals, and telecom networks.</li>
<li>Minimum 5+ years of proven experience in the medium voltage and/or high voltage utility substations and power generation industry with experience in a supervisory role leading and running projects in greenfield and brownfield substations.</li>
<li>Relay testing of microprocessor-based protection IED’s (SEL, ABB, Siemens, GE, etc.) with fully automated test equipment (Omicron CMC356) and test data management.</li>
<li>Experienced in high voltage primary equipment testing and commissioning involving power transformers, reactors, circuit breakers, CT’s, PT’s, surge arrestors, disconnect switches, cap and reactor Banks, etc.</li>
<li>Testing and commissioning as per NETA/IEEE/IEC standards.</li>
<li>Strong understanding of safety standards.</li>
<li>Strong interpersonal and communication skills and an extreme attention to detail are essential.</li>
<li>Knowledge of the Microsoft office software suite of programs coupled with strong computer skills.</li>
<li>Excellent organizational skills and ability to manage a wide variety of issues simultaneously.</li>
<li>Strong analytical, risk assessment and problem solving skills.</li>
<li>NETA Testing Certification an asset.</li>
<li>Background checks and Drug and Alcohol Pre-Access Testing will be required as part of employment.</li>
</ul>
Requirements:
<ul>
<li>Must be legally able to work in the United States, VISA Sponsorship is not available for this position.</li>
<li>Valid driver’s license with clean driving record.</li>
<li>Ability to work for extended periods out of town.</li>
</ul>
Additional Information:
<ul>
<li>Working hours are generally from 7am - 5:30pm at 10hrs/day.</li>
<li>Daily work hours and shifts are subject to change based on project requirements, applicants must be flexible to accommodate these changes when required.</li>
</ul>
Phasor USA LLC. offers a competitive compensation and benefits package and excellent opportunities for growth and advancement. We are an Equal Opportunity Employer committed to a diverse workforce. While we appreciate all applications we receive and the applicant's interest in our company, only those who are selected for an interview will be contacted.
Other names for these roles include: Commissioning Technologist, Commissioning Engineer, Commissioning Lead, Commissioning Specialist, Commissioning Manager, Field Service Specialist, Field Service Technologist/Technician, Protection and Control Technologist/Technician, Protection and Control Specialist, Protection and Control Testing Engineer, Relay Technologist/Technician, Power System Technician, Power System Electrician, PSE, Electrical Engineering Technologist
 
Benefits
<ul>
<ul>
<ul>
<ul>
<li>Dental care</li>
<li>Disability insurance</li>
<li>Employee assistance program</li>
<li>Extended health care</li>
<li>Life insurance</li>
<li>On-site parking</li>
<li>Paid time off</li>
<li>401k</li>
<li>Vision care</li>
<li>Wellness program</li>
</ul>
</ul>
</ul>
</ul>

Lead Commissioning Engineer / Commissioning Manager

<h3>Job Description</h3>
Job DescriptionDescription: Calibrated To Exceed Expectations 
Are you a hands-on problem solver with the grit/determination to deliver exceptional service? Do you have a knack for diagnosing technical issues and providing top-notch solutions? Our McFarland team is looking for someone with mobile field service, maintenance, mechanics, or prior military experience to join our team as a Field Service Technician. You’ll have the opportunity to showcase your exceptional technical skills, problem-solving abilities, and commitment to customer service excellence on a daily basis. 
 
Who We Are:
At UniFide CST, we pride ourselves on delivering top-notch technical support and service to our valued clients and customers. We are a primary distributor of weighing systems, thermal printing equipment, and data collection software. With a long-standing reputation for superior service and products, our technical services, sales, and representatives are positioned to provide solutions that exceed your expectations.
 
The Role:
As a Field Service Technician, you'll be at the forefront of our operations, providing hands-on mobile support and expertise to our diverse client base. From diagnosing and resolving technical issues to installation and calibration, conducting preventive maintenance, and building lasting customer relationships, you'll play a pivotal role in driving our continued success.
 
What A Day In The Life Looks Like:
<ul>
<li>Utilize your technical proficiency to diagnose and troubleshoot mechanical and electrical systems effectively</li>
<li>Deliver exceptional customer service, addressing client concerns with patience, empathy, and professionalism</li>
<li>Demonstrate adaptability and problem-solving abilities in handling diverse and unpredictable field situations</li>
<li>Maintain accurate documentation of service activities and provide comprehensive reports to clients and internal stakeholders</li>
</ul>
What You Bring To The Table:
<ul>
<li>Analytical thinking and adaptability to new technologies (PC Computers and MS Office software)</li>
<li>Commitment to safety and adherence to regulations</li>
<li>Technical/troubleshooting competence and a willingness to learn</li>
<li>Strong knowledge of mechanical, electrical maintenance, and electronics</li>
<li>Strong communication skills and a customer-focused mindset</li>
<li>Possess a valid Class B CDL or a willingness to obtain one</li>
<li>Associate degree from a two-year college/technical school in Manufacturing, Technical, or Electronics Program, or equivalent work experience </li>
</ul>
Typical Hours: Monday to Friday. Some overtime hours and flexibility are required. 
 
Benefits:
<ul>
<li>Competitive Pay $26-$32/hr (depending on experience)</li>
<li>Full Medical, Dental, Vision, and Disability Insurance</li>
<li>8 Paid Holidays</li>
<li>3 Weeks PTO</li>
<li>401(K) W/ 3% Match</li>
<li>Profit Sharing Incentive Bonus</li>
<li>Per Diem</li>
<li>Advancement Opportunities W/ Pay Increases (Tech I, Tech II, Lead Tech) (Sales) (Management)</li>
<li>The TEAM!</li>
</ul>
Why Join Us:
Joining means becoming part of a dynamic team dedicated to excellence and innovation. With opportunities for growth, ongoing training, and a supportive work environment, we empower our employees to reach their full potential and make a meaningful impact every day.
 
If you're ready to take the next step in your career and become part of a winning team, we want to hear from you! Don't miss this opportunity to showcase your talents and grow with us. Apply today and embark on a rewarding journey with UniFide CST. 
UniFide CST is an Equal Opportunity Employer Requirements:

Field Service Technician

<h3>Job Description</h3>
Job DescriptionCompany Description 
Visa is a world leader in payments and technology, with over 259 billion payments transactions flowing safely between consumers, merchants, financial institutions, and government entities in more than 200 countries and territories each year. Our mission is to connect the world through the most innovative, convenient, reliable, and secure payments network, enabling individuals, businesses, and economies to thrive while driven by a common purpose – to uplift everyone, everywhere by being the best way to pay and be paid.
Make an impact with a purpose-driven industry leader. Join us today and experience Life at Visa.
Job Description 
The Value-Added Services Product Development (VAS PD) team drives the diversification of our revenue with products that differentiate Visa network and deliver valuable solutions across other networks. Risk Authentication and Identity Solutions (RaIS) team in VAS focuses on innovative, AI-driven risk and fraud management solutions for issuers, merchants and fintechs.
The Chief Software Engineer in the RaIS Product Development team will be responsible for leading the technology strategy, solution, and execution of initiatives that support our business objectives. This role focuses on 3DS Authentication products such as Visa Enhanced Authentication, Visa Secure, Cardinal VCAS and Identity platforms such as B2C-IAM, Visa Payment Passkeys etc.
Essential Functions
<ul>
<li>
Define and drive the overall technical strategy and architecture, ensuring alignment with business goals while accelerating innovation and time to market.
</li>
<li>
Architect, design, and code highly scalable, reliable, and secure distributed systems and transaction processing platforms.
</li>
<li>
Lead the adoption of Generative AI and Agentic AI to boost developer productivity by 10X, leveraging these technologies to build innovative business solutions and products.&nbsp;
</li>
<li>
Establish and promote best practices for software development, including CI/CD automation and DevOps, to improve efficiency and quality across the SSDLC.&nbsp;
</li>
<li>
Oversee cloud first application development and optimization on AWS, Azure, or GCP to ensure solutions are resilient, scalable, cost-effective, and secure.&nbsp;
</li>
<li>
Actively contribute to critical projects by developing key modules, core frameworks, automation tools, and proof-of-concepts to validate emerging ideas and technologies.&nbsp;
</li>
<li>
Provide technology leadership and motivate high-performing engineering teams, setting clear priorities to achieve product and technology KPIs.&nbsp;
</li>
<li>
Collaborate cross-functionally with security, privacy, governance, and business partners to deliver compliant, scalable, and reliable solutions that meet all non-functional requirements.&nbsp;
</li>
<li>
Communicate technical strategy and engineering solutions effectively to diverse stakeholders, including executives and business units.&nbsp;
</li>
<li>
Mentor and coach senior engineers and engineering managers, fostering a culture of collaboration and continuous learning through brown bags, tech talks, and one-on-one sessions.&nbsp;
</li>
<li>
Implement rigorous application development, testing, deployment, and monitoring practices to uphold architectural excellence and reliability standards.
</li>
<li>
Adhere to Visa’s Leadership Principles by promoting collaboration, acting as owner, and executing with excellence.
</li>
</ul>
This is a hybrid position. Expectation of days in office will be confirmed by your hiring manager.
Qualifications 
Basic Qualifications: • 12+ years of relevant work experience with a Bachelor’s Degree or at least 9 years of work experience with an Advanced degree (e.g. Masters, MBA, JD, MD) or 6 years of work experience with a PhD, OR 15+ years of relevant work experience. Preferred Qualifications: • 15 or more years of experience with a Bachelor’s Degree or 12 years of experience with an Advanced Degree (e.g. Masters, MBA, JD, or MD), PhD with 9+ years of experience • Technical Expertise: 15+ years in software engineering with a strong background in architecting large-scale, distributed systems. Proficiency in languages like Java, Python, or GoLang, and frameworks such as Spring, Node.js, React. Experience with RESTful and gRPC APIs, microservices, and event-driven systems. • Security Expertise: Strong understanding of API security, data encryption, and Hardware Security Modules (HSMs). Experience in building secure applications and implementing security-first practices. • Database Skills: Proficiency in SQL and NoSQL databases (e.g., MSSQL, MongoDB). Experience with distributed caching technologies like Redis. • Generative AI &amp; Agentic AI: Proven experience leveraging Generative AI and Agentic AI to drive 10X productivity improvements and product innovation. Familiarity with integrating AI solutions into existing platforms. • Cloud &amp; DevOps: Hands-on experience with AWS, Azure, or GCP. Strong understanding of DevOps practices, CI/CD pipelines, containerization (Docker), and orchestration tools (Kubernetes). • SSDLC Automation: Demonstrated ability to automate SSDLC phases to improve efficiency and quality. Experience with automated testing frameworks, code quality tools, and delivery pipelines. • Architectural Leadership: Deep understanding of architectural patterns and best practices. Ability to balance short-term and long-term technological decisions aligned with business goals. Experience in designing and maintaining highly available (99.999%), reliable, active active critical systems. • Hands-On Attitude: Willingness to contribute directly to codebases and develop to validate new ideas and integrate beneficial emerging technologies. • Leadership &amp; Communication: Proven ability to lead and mentor engineering teams, fostering a collaborative environment. Excellent communication skills to articulate complex technical concepts to diverse audiences. • Additional Qualifications: Familiarity with compliance and regulatory requirements in the payments industry is a plus. Passion for staying current with industry trends and emerging technologies.
 Additional Information 
Work Hours: Varies upon the needs of the department.
Travel Requirements: This position requires travel&nbsp;5-10% of the time.
Mental/Physical Requirements: This position will be performed in an office setting.&nbsp; The position will require the incumbent to sit and stand at a desk, communicate in person and by telephone, frequently operate standard office equipment, such as telephones and computers.
Visa is an EEO Employer.&nbsp; Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.&nbsp; Visa will also consider for employment qualified applicants with criminal histories in a manner consistent with EEOC guidelines and applicable local law.
Visa will consider for employment qualified applicants with criminal histories in a manner consistent with applicable local law, including the requirements of Article 49 of the San Francisco Police Code.
U.S. APPLICANTS ONLY: The estimated salary range for a new hire into this position is 204,500.00&nbsp;to 296,700.00&nbsp;USD per year, which may include potential sales incentive payments (if applicable). Salary may vary depending on job-related factors which may include knowledge, skills, experience, and location. In addition, this position may be eligible for bonus and equity. Visa has a comprehensive benefits package for which this position may be eligible that includes Medical, Dental, Vision, 401 (k), FSA/HSA, Life Insurance, Paid Time Off, and Wellness Program.

Chief Software Engineer

<h3>Job Description</h3>
Job Description
Lead Field Service Engineer – Drives Job Summary The Lead Field Service Engineer – Drives operates with minimal supervision to perform a broad range of engineering tasks related to the installation, commissioning, servicing, and troubleshooting of variable speed drive systems. This role involves providing technical support for field operations and ensuring the reliable performance of drive systems across diverse industrial environments.
Lead Field Service Engineer – Drives Responsibilities
<ul>
<li>
Conduct on-site troubleshooting of variable speed drive systems, identifying and resolving issues promptly.
</li>
<li>
Develop and maintain technical documentation, including commissioning and maintenance procedures, service logs, and reports.
</li>
<li>
Carry out installation and commissioning of drive systems at client locations, often under challenging field conditions.
</li>
<li>
Lead small technical teams during field assignments and serve as the on-site project lead.
</li>
<li>
Oversee on-site project coordination, ensuring customer satisfaction and technical compliance.
</li>
<li>
Support the execution of engineering tasks required for the technical integrity and proper commissioning of drive systems.
</li>
<li>
Deliver training and presentations to clients on drive system operation and maintenance.
</li>
<li>
Collaborate with internal teams (customer support, engineering, sales, parts, and service) to enhance customer experience.
</li>
<li>
Advise clients on recommended upgrades and service options to optimize system performance.
</li>
<li>
Plan and coordinate routine and emergency maintenance activities with customers.
</li>
<li>
Assist in the preparation and support of technical proposals and project bids.
</li>
<li>
Identify improvement opportunities and recommend solutions to enhance equipment reliability and uptime.
</li>
<li>
Promote maintenance service offerings and identify sales opportunities during field engagements.
</li>
<li>
Provide responsive on-call support, ensuring timely issue resolution and accurate documentation.
</li>
<li>
Participate in marketing campaigns and initiatives supporting business development.
</li>
<li>
Perform other related duties as assigned to meet evolving business needs.
</li>
</ul>
Lead Field Service Engineer – Drives Position Requirements
<ul>
<li>
Minimum 5 years of hands-on experience in field service or commissioning of industrial electrical equipment.
</li>
<li>
Willingness and ability to travel extensively (up to 85%), sometimes on short notice.
</li>
<li>
Strong written and verbal communication skills.
</li>
<li>
Ability to work independently and organize workload to meet project timelines.
</li>
<li>
Comfortable working in marine environments including onboard vessels, in shipyards, or offshore.
</li>
<li>
Must be physically fit for vessel access and offshore assignments.
</li>
<li>
Must pass relevant offshore survival training (e.g., HUET).
</li>
<li>
Bachelor’s or Associate Degree in Electrical Engineering or a related field.
</li>
<li>
Proficiency with specific drive systems and controllers, including but not limited to MV7000, SD7000, MV3000, PEC, PECe, CDC.
</li>
<li>
Demonstrated ability to perform complex technical assignments independently.
</li>
<li>
Strong PC skills and familiarity with MS Office Suite.
</li>
<li>
Experience in customer-facing roles within service or field engineering environments. #LI-Onsite
</li>
</ul>
Pandologic. Keywords: Field Engineer, Location: WEST VALLEY CITY, UT - 84120 , PL: 601143007

1,287 Engineering Jobs in Brown Township, OH, USA