<h3>Job Description</h3>
Job DescriptionSalary: 
HMC Gears is growing, and we are looking for qualified CNC Machinists like you! Founded over 100 years ago,HMC is an international contender in the large gear manufacturing industry, complete with the most cutting edge CNC machine technology in the world that allows us to manufacture gearing up to 8 meters in diameter.Our invaluable CNC Machinists work with the most advanced technology to cut chips for some of the largest gears in the world. As a custom job shop, every day brings a diverse set of challenges and successes.
 
Responsibilities for our CNC Machinists include, but are not limited to:
<ul>
<li>Machine Setups</li>
<li>Programming on Machine Tools</li>
<li>Adjusting and reprogramming controls</li>
<li>Operate large CNC mills and lathes</li>
<li>Maintaining specifications, tolerances, and quality requirements when performing drilling, grooving, and cutting, turning, facing, knurling and thread chasing</li>
<li>Troubleshooting programming and process errors</li>
<li>Perform preventative maintenance for assigned machines </li>
<li>Calculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometers and calipers</li>
<li>Follow work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters, and interpreting geometric dimensions and tolerances (GD&amp;T)</li>
<li>Maintain specifications, tolerances, and quality requirements when performing drilling, grooving, and cutting, turning, facing, knurling and thread chasing, measurements, interpreting malfunctions, troubleshooting processes; adjusting and reprogramming controls, replacing worn tools; sharpening tools, and adhering to quality requirements, procedures, and processes</li>
</ul>
Qualifications
<ul>
<li>Associates Degree or Higher in CNC Machining; or</li>
<li>Three years of directly-related CNC machine work experience</li>
</ul>
Position Requirements
<ul>
<li>CNC Machining experience</li>
<li>Ability to basic math functions</li>
<li>Ability to read, write, and comprehend G and M code</li>
<li>Ability to read and understand blueprints</li>
<li>Must be mechanically inclined</li>
<li>Detail-oriented</li>
</ul>
 
Work Environment
This job is located in a climate-controlled machine shop and could be exposed to heat, cold, loud noises, and vibration. Responsibilities of this job require frequent walking, standing, lifting, reaching, and bending and frequent lifting, pushing, and pulling of objects up to 50lbs.There may be repetitive motions of the hands and wrists.
 
Candidates must be authorized to work in the U.S. and able to commute to Princeton, IN.
This is a permanent position with competitive wages and exceptional benefits including PTO, company paid holidays, health insurance, company paid dental insurance, group life/ short-term disability insurance, optional wellness program, retirement plan, and more. 
 
Currently enrolled in a precision machining program? HMC offers a competitive internship program for local high school and college students. Learn more about us by visiting our website at <a href="http://www.hmcgears.com" target="_blank">www.hmcgears.com</a>.

CNC Machinist

<h3>Job Description</h3>
Job DescriptionSalary: DOE 
AFCO Performance Group will be hiring a CNC Machinist in Boonville, Indiana. Due to the exploding market of Auto Racing, we are looking for a team member that enjoys daily or weekly goal setting and teaming up to exceed expectations. We work in a climate-controlled environment and are currently working 10-hour days Monday to Thursday.
 
The ideal candidate will apply machining experience to procure parts that help the team produce products, exceeding customer expectations in auto racing markets around the world.
 
Responsibilities:
 
<ul>
<li>Operate all equipment in a proper and safe manner.</li>
<li>Utilize CNC saw to prepare raw materials for jobs.</li>
<li>Machine parts on CNC horizontal lathes and CNC vertical mills according to work orders.</li>
<li>Check critical features of parts with measurement equipment &amp; ensure details meet required tolerances.</li>
<li>Keep the machines / machining area clean and in order.</li>
</ul>
 
Minimum Requirements:
 
<ul>
<li>Experience &amp; training in the use of CNC machining equipment. Manual machining equipment operation is a plus. Two-year technical degree is preferred.</li>
<li>High school diploma or a GED.</li>
<li>Capable of reading and interpreting detailed engineering drawings.</li>
<li>Capable of using measurement and dimensional inspection equipment such as Vernier calipers, micrometers, and height gauges.</li>
<li>Capable of performing offsets in CNC machine programs to ensure parts meet tolerances.</li>
<li>Mastercam experience is a plus.</li>
<li>Must have a mechanical inclination and be able to use hands to operate machinery in a productive and safe manner.</li>
<li>Must be able to stand, bend, twist, and lift a minimum of 50 pounds.</li>
<li>Must recognize and acknowledge the high moral quality and goodwill of the company.</li>
<li>Must understand and acknowledge that employee is exposed to trade secrets or other information that is proprietary to AFCO and must agree to maintain the confidentiality of both.</li>
</ul>
Company Overview
AFCO Performance Groupengineers, manufactures, and distributes premium Shocks, Springs, Brakes, Cooling, Exhaust Products, Gauges, Scales, Specialty Tools, Chassis Setup Equipment, and Motorcycle Suspension Products through its various brands:AFCO Racing Products,Dynatech Headers,PRO Shocks,DeWitts Radiators,Longacre Racing Products, andLegend Suspensions. AFCO Performance Group continues to build on over 35 years of manufacturing experience with quality performance products, racing engineering innovation, and superior service and support.
If you are looking for a family-like atmosphere, in a climate-controlled environment, plus competitive compensation, health, dental and vision insurance, long term disability, 401(k)/matching, and paid vacation, please visit us online at<a href="https://www.afcoperformancegroup.com" target="_blank">https://www.afcoperformancegroup.com</a>.

<h3>Job Description</h3>
Job DescriptionSalary: $19.00 - $40.00 
The Shop Technician is responsible for the setup, assembly, fabrication, diagnostics, and commissioning of new and used equipment in the SIGMA Equipment inventory. The ideal candidate will be a motivated, self starter, who enjoys working with mechanical and electrical systems in a team oriented, shop environment.
 
Candidate Expectations:
<ul>
<li>Problem Solver</li>
</ul>
<ul>
<li>Multi-tasker</li>
</ul>
<ul>
<li>Get work done with and through others (find the people that can make things happen)</li>
</ul>
<ul>
<li>Adaptability</li>
</ul>
<ul>
<li>Accept responsibility / accountability</li>
</ul>
<ul>
<li>Sense of pride in work and getting it done right the first time</li>
</ul>
<ul>
<li>Ability to think creatively to innovate and improve shop process</li>
</ul>
 
Duties/Responsibilities:
<ul>
<li>Observes functioning of equipment to detect hazards, problems, and the need for service, repair, and/or replacement of electrical, electronic components and mechanical components</li>
<li>Basic understanding of electronic and electrical schematics; draws sketches to clarify design details and functional criteria of electronic units</li>
<li>Ability to disassemble machinery or equipment to remove parts and make repairs</li>
<li>Examine machinery parts for defects, such as breakage or excessive wear</li>
<li>Re-assemble equipment after completion of inspections, testing, or repairs</li>
<li>Clean, lubricate, or adjust parts, equipment, or machinery</li>
<li>Analyze test results, machine error messages, or information obtained from observation to diagnose equipment problems</li>
<li>Record repairs and maintenance performed in the central database</li>
<li>Must be able to work under minimal supervision</li>
</ul>
 
Knowledge, Skills and Abilities:
<ul>
<li>Basic understanding of AC and DC electrical systems</li>
</ul>
<ul>
<li>Ability to diagnose mechanical and electrical problems</li>
</ul>
<ul>
<li>Intermediate skill level with Mechanical aptitude/ability</li>
</ul>
<ul>
<li>Basic level of electrical aptitude / ability</li>
</ul>
<ul>
<li>Experience with pneumatics and electricity</li>
</ul>
<ul>
<li>Experience working in an industrial environment</li>
</ul>
<ul>
<li>Associates degree in electronics technology or equivalent certification.</li>
<li>Basic working knowledge of Allen Bradley and Siemens PLCs/controls/protocols platforms is desired.</li>
<li>Must possess a continuous improvement mindset </li>
<li>Valid Driver's License</li>
</ul>
Physical/Travel Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to use hands to handle or feel; reach with hands and arms; and talk or hear. The employee frequently is required to stand; walk; and stoop, kneel, crouch or crawl. The employee is occasionally required to sit and climb or balance. The employee must regularly lift and/or move up to ten pounds, frequently lift and/or move up to fifty pounds, and occasionally lift and/or move more than one hundred pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus
 
Testing
<ul>
<li>Bennett Mechanical Comprehension Test</li>
<li>Basic Electrical Skills Analysis Test (To Be Determined)</li>
</ul>
 
About Our Company:
SIGMA Group is a successful, growing company of just under 150 employee-owners based in Evansville, Indiana. SIGMA primarily serves the food, beverage and other consumer goods industries, with a focus of buying and selling new and used production equipment to manufacturers around the globe. Our Sigma Surplus division is one of the fastest growing companies in the U.S.
 
What We Offer:
As an ESOP (Employee Stock Ownership Plan) company, our culture revolves around innovation, creative solutions and the tenacity to see them through. Our casual offices are filled with passionate people who work hard and play hard. We welcome new ideas and offer opportunities for advancement within all teams!
 
<ul>
<li>Competitive compensation</li>
<li>Professional growth and development opportunities</li>
<li>Tuition reimbursement</li>
<li>Comprehensive health and wellness plan</li>
<li>Flexible paid time off and paid holidays</li>
<li>Team-building activities</li>
<li>ESOP participation and 401(k) savings plan</li>
</ul>
 
SIGMA is an equal opportunity employer dedicated to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. We value talent and understand that our colleagues allow us the opportunity to deliver an exceptional customer experience. We achieve our goals through teamwork and conduct our business with integrity.

Shop Technician

<h3>Job Description</h3>
Job Description
Industrial Maintenance Technician – Entry Level Position
Day Shift: Monday -Thursday 6am-3pm &amp; Friday 5am-9am
What would you do: You would be involved with troubleshooting and maintaining machinery and mechanical equipment to ensure support for production, mixing and the plant facility. You will be able to work independently to maintain, install, trouble-shoot and repair AC/DC motors, conveyors, extrusion machinery, mixing machinery, forklifts, etc. Beyond the daily maintenance, you will be involved with various projects, such as installations, retooling, and doing a lot of preventative maintenance.
&nbsp;&nbsp;Preferred Experience
·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Manufacturing, particularly extrusion machinery.
·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Electrical and mechanical skills
·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Understanding of hydraulic and pneumatic operations is beneficial
·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Use of a variety of hand and power tools
·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Some fabrication or welding
What we are really hoping to find: Someone who has some education and previous experience in industrial maintenance, preferably 1-2 years. (electrical experience desired).&nbsp; But technical expertise is not the only thing.We know that you will be dealing with a multitude of tasks, so the ability to prioritize and plan your work is important. Having the ability to "master" managing the multiple spinning plates that comes with this line of work. With all of that in mind, we need you to be conscientious, hard-working, dependable, resilient, tenacious, and fun to work with!
What we can offer: We are a smaller company, and we work as a tight-knit team. You can count on everyone to pull their weight. You can expect fair compensation and enjoy a casual but professional work environment.
•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Medical / Vision / Dental
•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supplemental Plans
•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 401K
•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Vacation I Sick/ Holidays
If you are interested in an exciting job to go to, a job where you have room to grow, then, don't wait! Apply to this job posting and let us see if we are the right fit for you!
Job Type: Full-time
Salary: $18.00 to $25.00 / hour (negotiable based on experience)
Applicant Questions
•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; How many years of Industrial Maintenance experience do you have?
•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; How many years of Maintenance experience do you have?
•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; How many years of Electrical experience do you have?

Industrial Maintenance Technician

<h3>Job Description</h3>
Job DescriptionJob Title: Blender/Mixer OperatorJob Description
The Mixer Operator is responsible for making batches of material in accordance with customer and company specifications. This role includes weighing materials, cleaning the mixing area, and troubleshooting any mixing problems. Additional tasks may be assigned by the Manager or Group Leader as necessary.
Responsibilities
<ul>
<li>Review Mixing Schedule</li>
<li>Produce batches in mixer as scheduled</li>
<li>Inspect reconditioned drums prior to use</li>
<li>Dump batches from mixers</li>
<li>Communicate with the previous mixerman to discuss any irregularities or special instructions</li>
<li>Produce standard production batches by following the Mixing Procedure</li>
<li>Stop immediately and notify Group Leader and QA if any abnormalities occur</li>
<li>Maintain correct identification on batches</li>
<li>Complete necessary paperwork correctly and timely, including batch tickets and mixing dump reports</li>
<li>Inform Manager of any unidentified or mis-identified batches, drums, or raw materials, safety concerns, and maintenance concerns</li>
</ul>
Essential Skills
<ul>
<li>1-3 years of experience in mixing, batching, compounding, chemical handling, machine operation, and blending</li>
<li>1-3 years of experience as a Batching Operator</li>
<li>Forklift operation</li>
<li>Production and batch documentation</li>
</ul>
Additional Skills &amp; Qualifications
<ul>
<li>Must be able to lift up to 60lbs repeatedly</li>
<li>Comfortable working in a facility with strong odor</li>
<li>Must be able to pass a skills key test</li>
<li>Must be able to pass an audiogram test</li>
<li>High school diploma/GED or equivalent</li>
<li>Prior industrial cleaning or housekeeping experience</li>
<li>Chemical manufacturing experience</li>
<li>Forklift experience (optional)</li>
</ul>
Work Environment
This role is based in a chemical plant primarily producing automotive materials. The environment is climate-controlled, and team members will be exposed to moving equipment, noise, fumes, vibrations, and dust. Reasonable accommodations may be made for individuals with disabilities. Shifts are 8-10 hours long, and mandatory weekend work may be required. Safety PPE, including steel-toed shoes, safety glasses, respirators, gloves, and earbuds, is provided.
Shifts/Schedule: 
1st shift: 7:00am – 3:30pm, Monday – Friday
2nd shift: 3:00pm – 11:30pm, Monday – Friday 
3rd shift: 11:00pm – 7:30am, Sunday – Thursday 
***Starting $21.25/hr 1st shift or $23.25/hr 2nd and 3rd + $4/hr within the first year in Evansville,IN!!!***Pay and Benefits
The pay range for this position is $21.25 - $23.25/hr.
Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: � Medical, dental &amp; vision
� Critical Illness, Accident, and Hospital
� 401(k) Retirement Plan � Pre-tax and Roth post-tax contributions available
� Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
� Short and long-term disability
� Health Spending Account (HSA)
� Transportation benefits
� Employee Assistance Program
� Time Off/Leave (PTO, Vacation or Sick Leave)
Workplace Type
This is a fully onsite position in Evansville,IN.
Application Deadline
This position is anticipated to close on Jul 4, 2025.
About Aerotek:
We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow. 
<h3>Company Description</h3>
We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Mixer Operator

<h3>Job Description</h3>
Only USC, GC &amp; EAD'S
Overview:
We are seeking a skilled Industrial Automation Technician with strong experience in PLC programming and troubleshooting. This role requires hands-on expertise in electrical systems, industrial controls, and automation technologies. The ideal candidate is mechanically inclined, comfortable working in various environments, and open to travel.
Key Responsibilities:
<ul>
<li>Program and troubleshoot PLCs (Toyopuc, Siemens, Omron, Mitsubishi, Allen Bradley) – Minimum 2 years’ experience required</li>
<li>Diagnose and repair electrical circuits, motor starters, and hydraulic systems</li>
<li>Interpret mechanical and electrical schematics and drawings</li>
<li>Perform hands-on installations, maintenance, and repairs using hand and power tools</li>
<li>Travel domestically and internationally up to 50% of the time</li>
<li>Work overtime (up to 30%) when needed</li>
</ul>
Qualifications:
<ul>
<li>Associate degree in Electrical Engineering Technology, Industrial Maintenance, or a related field; or equivalent hands-on experience</li>
<li>Minimum 2 years of industrial maintenance experience</li>
</ul>

Controls/ Robotics Engineer

<h3>Job Description</h3>
Job DescriptionA New Product Development (NPD) Engineer designs and develops new products from initial concept to launch, working closely with cross-functional teams. Responsibilities include designing new products, testing prototypes, evaluating production costs, and ensuring products meet industry standards. They also analyze existing products, create technical drawings, and document the entire development process. Benefits Medical insurance, Dental insurance, Vision insurance, 401K with company match, Paid holidays, Bereavement leave, Educational Tuition Reimbursement, Paid vacation Culture Our Vision: Miniature control solutions that improve life and animate the world. Our Mission: Putting people first Responsibilities 
<ul>
<li>Product Design and Development:Conceptualize and design new products or improvements to existing ones. </li>
<li>Prototype Testing and Analysis:Build and test prototypes, analyzing functionality and identifying areas for improvement. </li>
<li>Cost and Feasibility Analysis:Evaluate production costs and conduct feasibility studies to ensure product viability. </li>
<li>Cross-Functional Collaboration:Work closely with marketing, production, quality assurance, and other teams to ensure product meets customer needs and company objectives. </li>
<li>Technical Drawings and Specifications:Create technical drawings using CAD software and outline product specifications. </li>
<li>Documentation:Document the entire development and design process, including product specifications and testing results. </li>
<li>Compliance and Standards:Ensure products comply with industry standards and regulatory requirements. </li>
<li>Continuous Improvement:Identify areas for improvement in existing products and processes based on customer feedback and market trends. </li>
</ul>
 Requirements Authorized to work in the US without sponsorship Accept a drug test to be performed Proficient experience in 3D CAD Minimum Bachelors Degree -Engineering Minimum 2-3 Years of Experience Knowledge in: 3D CAD (preferably SolidWorks) Requisition #cma18fdsedv120iqp1x1qux0b

New Product Mechanical Design Engineer - Relocation to Cincinnati, OH

<h3>Job Description</h3>
Job Description
Overview
Tradesmen International is looking to expand our team of qualified Trade Professionals for current &amp; future projects in and around Evansville, IN. Most positions are first shift with a pay range of up to $26/hour based on experience &amp; skill level. If you are a Painter and want to work alongside other proven Craftsmen who emphasize safety, productivity, and superior workmanship, this is your chance to advance your career!
Job Scope:
<ul>
<li>Roll, Brush, Spray Paint</li>
<li>Residential &amp; Commercial Interior &amp; Exterior Painting</li>
<li>Some Industrial Painting</li>
</ul>
 
Qualifications
Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. 

Our comprehensive benefits include:
<ul>
<li>Vacation Pay</li>
<li>Health insurance</li>
<li>401(k) profit-sharing savings plan</li>
<li>Incentive programs</li>
<li>Tool purchase programs &amp; MORE!</li>
</ul>
Tradesmen International is an EO employer - M/F/Veteran/Disability

Click here to visit Tradesmen’s full website.

Painter

<h3>Job Description</h3>
Job Description
Champion Laboratories is hiring a MANUFACTURING ENGINEER to work on site at our plant located in Albion, IL.
The MANUFACTURING ENGINEER will assist by:
Principal Activities:
The Manufacturing Engineer reports to the Manager of Manufacturing Engineering, who reports to the Director of Manufacturing Services. The incumbent evaluates and/or proposes areas for improvement in manufacturing processes.
<ul>
<li>
Design equipment and processes to manufacture products in the most cost-effective manner.
</li>
<li>
Estimate project budgets and schedules accurately to ensure timely completion.
</li>
<li>
Provide technical assistance to other service and manufacturing departments within the company to support improvements and/or resolve issues with existing manufacturing processes and equipment.
</li>
<li>
Determine the practicality and cost-effectiveness of installing or modifying machinery and/or processes.
</li>
<li>
Collaborate with equipment suppliers, Product Engineering, and various manufacturing and service departments throughout the completion of a project.
</li>
</ul>
Preferred Requirements:
<ul>
<li>
Bachelor of Science degree in Engineering or equivalent education and experience.
</li>
<li>
1–3 years of experience in an engineering-related field.
</li>
<li>
Good working knowledge of machinery components and their functions.
</li>
<li>
General knowledge of PLC programming and logic circuits.
</li>
<li>
Strong mathematical background.
</li>
<li>
Proficiency in AutoCAD drawings.
</li>
<li>
Knowledge of machining principles and methods.
</li>
<li>
Drafting/sketching ability.
</li>
<li>
Strong project management skills.
</li>
</ul>
Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status.
Company DescriptionWe are a globally recognized automobile parts manufacturer. This company boasts a diverse product portfolio featuring leading national brands and is known for its best-in-class offerings and long-term customer relationships. 
<h3>Company Description</h3>
We are a globally recognized automobile parts manufacturer. This company boasts a diverse product portfolio featuring leading national brands and is known for its best-in-class offerings and long-term customer relationships.

Manufacturing Engineer

<h3>Job Description</h3>
Job DescriptionBenefits: 
<ul>
<li>401(k) matching</li>
<li>Dental insurance</li>
<li>Health insurance</li>
<li>Vision insurance</li>
</ul>
 SERVPRO of East Evansville is hiring a Restoration Supervisor! Key Responsibilities Coordinate, oversee, and perform restoration processes as scheduled and ensure quality control Manage the customer and client experience and overall project satisfaction Communicate clear expectations to restoration technicians and supervise their activities Thoroughly document restoration projects support the services provided Manage labor, equipment, and supply usage on assigned projects Communicate progress, problems, and important updates with internal team members. Verify all safety protocols are established and followed for workplace safety Perform daily, weekly, and monthly vehicle and equipment maintenance, as assigned. Coach and train restoration technicians Position Requirements High school diploma/GED Valid drivers license At least 1 year of experience in cleaning, restoration, or construction IICRC certifications a plus Skills/Physical Demands/Competencies Ability to lift a minimum of 50 pounds regularly, occasionally up to 100 pounds with assistance Ability to climb ladders, work at ceiling heights, work in tight spaces (e.g., crawl spaces, attics) Ability to repetitively push/pull/lift/carry objects Ability to work with/around cleaning agents Pay starts at $17- 20 an hour based on experience, with the possibility of overtime pay

93 Manufacturing Jobs in Wadesville, IN 47638, USA