<h3>Job Description</h3>
Job DescriptionThis position is responsible for processing and evaluating welded and machined components using the Fluorescent Penetrant Inspection method to MB Aerospace East Granby procedures along with customer specifications. This position sits in Warren, MI and will report to the Quality Manager. Culture About Us MB Aerospace is an international group providing complex engineering solutions to some of the key names in the Aerospace and Defense market. Operating from sites close to our key customers in North America, Asia and Europe, the MB Aerospace group provides advanced technological solutions to the Aerospace and Defense industry, leveraging an in-depth knowledge of fabrications, machining and the global supply chain to support complex aero-engine component manufacture and repair. Responsibilities Key Responsibilities • Review and implement customer requirements; such as: Engineering Drawings, Process Specifications and other industry standards. Develop and maintain processes, test methodology and procedures. Understand manufacturing methods and part construction, as it relates to the NDT data. • Operate X-ray equipment and interpret film • Oversee and process OE &amp; repair/overhaul hardware through FPI line and interpret results • Perform process control checks and NDT related calibrations as necessary • Identify and investigate new technologies, processes and/or procedures to maintain or improve NDT capabilities, efficiencies, etc. • Interface with engineers, internal customers, manufacturing personnel and management to improve processes. Provide guidance, leadership and instruction to other NDT technicians. • Integrate improvements to realize benefits in cost, cycle, and customer satisfaction. • Perform other assignments and tasks as directed. • Ensure adherence to applicable MB Aerospace internal, federal, state and local laws and regulations related to compliance and takes responsibility to ensure ongoing conformity with such rules and regulations Job Requirements • Associate Degree of Applied Science in NDT - The classroom training for the applicable test method and level of certification needed must meet the minimum required per NAS-410 • 4 years work experience in the NDT method(s) and manufacturing processes; certified Level 2 is preferred. • Employee must have the skills and formal training needed to become certified to NAS 410 level 2 in radiography testing (RT) and Penetrant Testing (PT) and be able to pass an annual eye examination per the requirements of NAS 410. • Must have a thorough knowledge of NDT theory, methods and procedures, and should have knowledge of NDT technologies, computer systems and conventional and automated testing systems. • Make and keep precise measurements and keep accurate records. • Must be able to take instructions and offer advice. The ability to work well with supervising engineers, other technicians, and mechanics is essential because technicians interact with people from other divisions, businesses, and customers. • Experience applying principles of mathematics for analysis, design, and troubleshooting tasks in their work. • Operating a personal computer with proficiency in related technical and specialized software. Extensive knowledge of Microsoft Office (Excel, Word, Powerpoint, Access, Outlook, etc) • Must comply with ITAR regulations and site SSA requirements. • Must have unrestricted authorization to work in the USA. MB Aerospace is an Equal Opportunity Employer. MB Aerospace is a subcontractor to the United States Government and provides defense services involving technical data and products governed by the Arms Export Control Act and the International Traffic in Arms Regulations (ITAR), 22 C.F.R. parts 120 - 130 and the Export Administration Act and the Export Administration Regulations (EAR), 15 C.F.R. parts 730 – 774 (“Export Laws”). All candidates are subject to review and governance under such Export Laws and any offer of employment may be subject to additional considerations and/or conditions. MB Aerospace is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Requirements High School / GED Completed Authorized to work in the US without sponsorship Accept a background check to be performed Accept a drug test to be performed 1-4 years NDT Experience Equal Opportunity Employer Barnes Aerospace provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Requisition #clsvwmq58wm7g0rmkgpz7jnw0

NDT Technician

<h3>Job Description</h3>
Job Description
Job Description
** Johnson Service Group (JSG) is a nationally recognized professional staffing and recruiting firm that is looking for an experienced Drafter to fill a one- year assignment in the Birmingham, AL area.
This position may require some bending, lifting, climbing, prolonged sitting, prolonged walking, walking on gravel or crawling when necessary.
Job Title: Drafter
Work Location: Birmingham, AL
Requirements:
Please send me your resume to <a href="mailto:lmccarron@jsginc.com" target="_blank">lmccarron@jsginc.com</a>
Rates: &nbsp;&nbsp;$35.00 - $40.00 per hour
Local Candidates Preferred.
Per diem is available if you qualify.
This position will be In-Person
Work schedule: 7am-3:30pm M-F (At the manager’s discretion)
Requirements:
2-5 years of drafting experience
An associate’s degree in drafting and design is preferred
Responsibilities:
CAD drafting of transmission line centerline right-of-way, boundary, topographic, and land tie surveys
This position will be responsible for interpreting and writing “metes and bounds” or “centerline” descriptions for assigned projects.
This position will support the survey field crews and office personnel by, but not limited to, researching existing survey and real estate records, contacting local and state agencies for right-of-way information, and transmitting completed projects.
Is this position supporting a government-related project? No
Does this position require driving (excluding commute)? No
Does this position require personal protective equipment (PPE)? No
Estimated Start Date: 10/20/2025
Estimated Duration of Job Assignment: 10/20/2026
JSG offers medical, dental, vision, life insurance options, short-term disability, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. #D650
Company DescriptionOur people and culture make JSG a great place to work. JSG’s mission is to empower people, help our clients reach their goals, and hire motivated individuals. Johnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with 40 years of experience investing in people and companies. We are always looking for great people to join our team—we want to see your success here at JSG! We can be found locally in more than 30 offices throughout the United States and Canada. JSG continues to work diligently to offer our clients and candidates world-class service and diversified offerings to fit their evolving needs. We offer medical, dental, vision, life insurance options, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. 
<h3>Company Description</h3>
Our people and culture make JSG a great place to work. JSG’s mission is to empower people, help our clients reach their goals, and hire motivated individuals.\r\n\r\nJohnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with 40 years of experience investing in people and companies. We are always looking for great people to join our team—we want to see your success here at JSG! We can be found locally in more than 30 offices throughout the United States and Canada. JSG continues to work diligently to offer our clients and candidates world-class service and diversified offerings to fit their evolving needs.\r\n\r\nWe offer medical, dental, vision, life insurance options, 401(k), weekly pay, and more.\r\n\r\nJohnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

Drafter

<h3>Job Description</h3>
Job Description
Fits and assembles components to construct, rebuild and repair machines and equipment by performing the following duties. May also be required to perform installation of equipment at customer facilities.
Essential Functions 
Level 1:
<ul>
<li>Basic mechanical abilities</li>
<li>Ability to assemble components with instructions/guidance</li>
<li>Ability to operate tools such as drill press, drills, miscellaneous hand tools, drill and tap holes</li>
<li>Ability to read tape measure and measure dimensions properly for assembly of components</li>
<li>Ability to make hoses as needed, with training</li>
<li>Possesses basic hand tools required to perform assembly tasks</li>
<li>Ability to communicate with coworkers</li>
<li>Work in a safe manner / follow all safety polices</li>
</ul>
Level 2:
<ul>
<li>Level 1 duties and abilities</li>
</ul>
<ul>
<li>Ability to bend piping and/or tubing properly and consistently</li>
<li>Ability to thread piping</li>
<li>Ability to read basic blueprint drawings to be able to assemble equipment and to locate and drill holes for assembly of components</li>
<li>Ability to identify proper fittings needed for all assemblies</li>
<li>Pass forklift training</li>
<li>Ability to operate Plasma cutting machine</li>
<li>Able to learn and comprehend tasks assigned</li>
<li>Good attendance</li>
</ul>
Level 3:
<ul>
<li>Level 1 and 2duties and abilities</li>
</ul>
<ul>
<li>Ability to thoroughly read blue prints with minor assistance</li>
<li>Ability to solve problem issues when assembling equipment</li>
<li>Ability to assemble standard machines and machine components with minor assistance</li>
<li>Ability to identify errors on drawings regarding fittings or components required</li>
<li>Ability to direct and train others on equipment use and machine assembly</li>
<li>Ability to handle lead on equipment installations</li>
<li>Handle various tasks well, as assigned</li>
<li>Maintain Positive and supportive attitude</li>
<li>Maintain good Attendance</li>
<li>Reinforce Cannon USA safety policies</li>
</ul>
Other Duties
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.
Qualifications: 
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential functions.
Required Education and Experience
<ul>
<li>Read blueprints and flow schematics- preferred</li>
<li>Some electrical experience a plus</li>
</ul>
Competencies
<ol>
<li>Ethical Conduct</li>
<li>Communication Proficiency</li>
<li>Technical Capacity</li>
<li>Collaboration</li>
<li>Time Management</li>
<li>Deductive reasoning</li>
<li>Decision Making</li>
</ol>
Physical demands
<ul>
<li>The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to lift 50 lbs., climb ladders, stoop and bend frequently.</li>
</ul>
Work Environment
<ul>
<li>Position may require travel. Travel can be as much as 15% of work hours and include travel/work on Saturday, Sunday and Holidays.</li>
</ul>
Company DescriptionSince 1965, Cannon has been a leading global player in reactive polymer processing technologies, with 1,300 employees worldwide and a presence in 40 different countries. At Cannon USA, we provide machines and turnkey plants in a variety of markets such as automotive, aerospace, appliances, building and construction, furniture, medical, and electronics. Extensive know-how and a significant aptitude for innovation enables us to develop technologically advanced and efficient solutions for different and exciting applications. Cannon is a long-standing supplier of polyurethane equipment headquartered in Milan, Italy, and is a pioneer in the polyurethane market. Cannon provides various types of machinery and equipment to customer locations around the world. Cannon USA supplies and services this equipment to all customer locations throughout the United States, Canada, and Mexico to many customers including many major leading manufacturers. Come join an internationally known polyurethane equipment manufacturing leader. We are looking for a candidate that can satisfy our requirement for a field service representative for an interesting, challenging, and essential position that will have an impact on the U.S. supply of both major and smaller manufacturing facilities. If you are that person that can join our team and make a difference in what we do, please apply. 
<h3>Company Description</h3>
Since 1965, Cannon has been a leading global player in reactive polymer processing technologies, with 1,300 employees worldwide and a presence in 40 different countries. At Cannon USA, we provide machines and turnkey plants in a variety of markets such as automotive, aerospace, appliances, building and construction, furniture, medical, and electronics.\r\n\r\nExtensive know-how and a significant aptitude for innovation enables us to develop technologically advanced and efficient solutions for different and exciting applications. Cannon is a long-standing supplier of polyurethane equipment headquartered in Milan, Italy, and is a pioneer in the polyurethane market. Cannon provides various types of machinery and equipment to customer locations around the world. Cannon USA supplies and services this equipment to all customer locations throughout the United States, Canada, and Mexico to many customers including many major leading manufacturers.\r\n\r\nCome join an internationally known polyurethane equipment manufacturing leader. We are looking for a candidate that can satisfy our requirement for a field service representative for an interesting, challenging, and essential position that will have an impact on the U.S. supply of both major and smaller manufacturing facilities.\r\n\r\nIf you are that person that can join our team and make a difference in what we do, please apply.

Mechanical Assembler

<h3>Job Description</h3>
Job Description
Randstad Staffing is HIRING NOW for a CNC Mill Setup Machinist on Weekend Day Shift for a leading Aerospace manufacturing company.&nbsp;This is a fantastic&nbsp; opportunity to secure a full-time role with a compressed schedule, offering a great work-life&nbsp; balance and premium pay!&nbsp;
Shift: Friday to Sunday
Hours: 6:00 AM to 6:00 PM (work 36, get paid for 40)
Pay: $28-35 per hour (12% shift differential included in listed pay rate)
Type: Direct Hire / Full-Time Employment
Key Responsibilities:&nbsp;
As a key member of our Weekend Team, you will be responsible for the setup and operation of&nbsp;sophisticated machinery to produce high-precision aerospace components:&nbsp;
• Set up, adjust, and operate various CNC Mill machinery&nbsp;
• Execute machine changeovers and efficiently manage production runs to maintain&nbsp; exceptionally tight tolerances.&nbsp;
• Adjust tools and modify feeds/speeds as necessary to optimize performance and part&nbsp; quality.&nbsp;
• Read and accurately interpret complex CNC code and blueprints.
• Perform SPC checks (Statistical Process Control) and complete accurate inventory&nbsp; counts.&nbsp;
• Maintain a clean, safe, and organized workspace at all times.&nbsp;
Qualifications&nbsp;
• High school diploma or equivalent.&nbsp;
• 4+ years of CNC machining experience is required, including proficiency in both&nbsp; setups and production runs.&nbsp;
• Strong foundational knowledge of machining tools and industry best practices.
• Demonstrated proficiency in blueprint reading and machinist math skills.
• Physical ability to lift 30 lbs and stand for the duration of the 12-hour shift.&nbsp;
Benefits:&nbsp;
• 401(k) and company&nbsp;match
• Health, Dental, and Vision insurance&nbsp;
• Life insurance&nbsp;
• Paid time off&nbsp;
• Tuition reimbursement&nbsp;
• Work Location: In person
Company DescriptionWe provide outsourcing, staffing, consulting and workforce solutions within the areas of engineering, accounting and finance, healthcare, human resources, IT, legal, life sciences, manufacturing and logistics, office and administration and sales and marketing. We can’t wait to tell you all about it. 
<h3>Company Description</h3>
We provide outsourcing, staffing, consulting and workforce solutions within the areas of engineering, accounting and finance, healthcare, human resources, IT, legal, life sciences, manufacturing and logistics, office and administration and sales and marketing. We can’t wait to tell you all about it.

CNC Mill Machinist - Weekend Days

<h3>Job Description</h3>
Job Description
Quality Control Specialist – E-Commerce Fulfillment
Job Description
We are seeking a highly detail-oriented Quality Control Specialist to join our fulfillment team. This role is critical in ensuring that every order leaving our facility meets the highest standards of accuracy and presentation.
The Quality Control Specialist will perform final inspections on outgoing packages before sealing, ensuring proper product fit, correct documentation, and overall quality. This position requires standing for long periods of time, working in an industrial setting, and assisting with packing boxes when needed.
The right candidate will be methodical, precise, and proactive in spotting errors that could lead to customer returns. Performance will directly impact a bonus program tied to reducing return rates.
Responsibilities
<ul>
<li>
Perform final quality checks on outgoing packages before sealing.
</li>
<li>
Verify product accuracy, order details, and packaging integrity.
</li>
<li>
Work closely with the Customer Service Manager and customer support team to address quality issues.
</li>
<li>
Communicate with customers when needed via phone and email.
</li>
<li>
Use shipping and e-commerce platforms: ShipStation, Shopify, Richpanel.
</li>
<li>
Maintain quality records and assist with reporting using Excel and Word.
</li>
<li>
Assist with packing and labeling boxes as required.
</li>
<li>
Identify recurring issues and collaborate with management to improve processes.
</li>
</ul>
Qualifications
<ul>
<li>
Strong attention to detail with excellent organizational skills.
</li>
<li>
Ability to stand for long periods in a warehouse/industrial environment.
</li>
<li>
Basic computer proficiency (Excel, Word, email).
</li>
<li>
Strong written and verbal communication skills (email and phone).
</li>
<li>
Prior experience with ShipStation, Shopify, Richpanel (preferred but not required).
</li>
<li>
Ability to work independently and as part of a team.
</li>
<li>
Quality control or fulfillment background preferred.
</li>
</ul>
Compensation
<ul>
<li>
Base Salary: $42,000 annually
</li>
<li>
Performance Bonus Program: Up to $20,000 annually (based on reducing product return rates)
</li>
<li>
Benefits package (if applicable – add details here)
</li>
</ul>
Company DescriptionStoveGuard is the nation’s leading manufacturer of stovetop protectors. As a small manufacturing company, our family atmosphere fosters growth and open communication. We are committed to hiring and rewarding those who excel, helping us to continue to provide high-quality products to our customers. 
<h3>Company Description</h3>
StoveGuard is the nation’s leading manufacturer of stovetop protectors. As a small manufacturing company, our family atmosphere fosters growth and open communication. We are committed to hiring and rewarding those who excel, helping us to continue to provide high-quality products to our customers.

Quality Control Lead

<h3>Job Description</h3>
Job Description$18.00-26.00/hour 90 Day Probation to Perm 7:00-3:30 M-F 1st&nbsp;shift offers four work schedules with flexible start/end times. Work 8-hour days five days a week, 10-hour days four days a week (Monday through Thursday or Tuesday through Friday), or 9-hour days four days a week and a half-day on Friday. 2nd shift&nbsp; 2nd 2:30-1:00am M-R Training, Skills, Knowledge and/or Experience:
<ul>
<li>Math skills – minimum high school arithmetic</li>
<li>Blueprint reading skills</li>
<li>Familiarity with basic hand tools&nbsp;</li>
<li>Excellent organizational skills</li>
<li>Attention to Detail</li>
<li>Good and dependable attendance.</li>
</ul>
 Basic Functions and Scope of Responsibilities: Within the framework of policies and procedures, the Mechanical Assembler position will have the authority and responsibility to perform material prep, finishing, and assembly operations within tolerances and planning estimates. This position also produces components by assembling parts and subassemblies. The mission of this job is to provide service to all areas while striving to improve processes of the company. Principle Responsibilities:
<ul>
<li>Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists.</li>
<li>Read and interpret blueprints, planning’s sketches for material prep and assembly operations.</li>
<li>Set-up simple fixtures, stops, and other aids to facilitate operation.</li>
<li>Assembles components by examining connections for correct fit; fastening parts and subassemblies.</li>
<li>Perform in process inspections on parts and assemblies; verifies specifications by measuring completed component.</li>
<li>Resolves assembly problems by altering dimensions to meet specifications; notifying supervisor to obtain additional resources.</li>
<li>Keeps equipment operational by completing preventive maintenance requirements; troubleshooting malfunctions; calling for repairs.</li>
<li>Maintains safe and clean working environment by complying with 5S standards.</li>
<li>Conserves resources by using equipment and supplies as needed to accomplish job results.</li>
<li>Assist in proof load and other testing operations, as required.</li>
<li>Interface with Quality Assurance personnel regarding inspection criteria and results.</li>
<li>Provide feedback to supervision regarding cycle times and suggest changes to improve productivity and part accuracy.</li>
<li>Conform to all requirements of our Quality System and any and all customer invoked quality requirements (AS9100, for example).</li>
<li>Document actions by completing production and quality forms.</li>
<li>Contributes to team effort by accomplishing related results as needed.</li>
</ul>

1st shift Assembler

<h3>Job Description</h3>
Job Description
Process Safety Engineer
Location:Cadet, MO, USA
Language: English
Travel: 10% - 15%
Seniority Level: Associate
Buckman is a privately held, global specialty chemical company with headquarters in Memphis, TN, USA, committed to safeguarding the environment, maintaining safety in the workplace, and promoting sustainable development. Be a part of our chemistry. Buckman associates have a real impact. Not just on the world of chemistry, but also on how the world uses chemistry to enhance manufacturing, improve products, solve problems and protect the environment. Together we practice the chemistry of success with an innovative mix of commitment and reward, teamwork and improvement, leadership and transformation, integrity and growth. We believe in a healthy work/life balance and we recognize the importance of advancement opportunities and competitive compensation.
The Process Safety Engineer is responsible for leading and managing process safety initiatives to ensure compliance with regulatory requirements and best practices. This role focuses on identifying and mitigating risks associated with chemical and manufacturing processes while driving continuous improvement in process safety management (PSM) systems. The ideal candidate will have a some background in process safety, risk assessment, and regulatory compliance, as well as experience working in a manufacturing or chemical processing environment.
Process Safety Management (PSM) &amp; Compliance
<ul>
<li>Lead the implementation and continuous improvement of PSM programs in compliance with OSHA 29 CFR 1910.119 and other applicable regulations.</li>
<li>Conduct Process Hazard Analyses (PHA), Layer of Protection Analyses (LOPA), and Hazard and Operability Studies (HAZOP) to identify and mitigate risks.</li>
<li>Develop and maintain process safety documentation, including Process Safety Information (PSI), Standard Operating Procedures (SOPs), and safety guidelines.</li>
</ul>
Risk Assessment &amp; Incident Investigation
<ul>
<li>Perform qualitative and quantitative risk assessments, including consequence modeling, dispersion analysis, and fire/explosion risk evaluations.</li>
<li>Lead or support incident investigations related to process safety events, root cause analyses (RCA), and the development of corrective and preventive actions (CAPAs).</li>
<li>Drive continuous improvement initiatives based on incident learnings and industry best practices.</li>
</ul>
Training &amp; Collaboration
<ul>
<li>Provide process safety training to engineers, operators, and maintenance personnel to enhance safety awareness and competency.</li>
<li>Collaborate with operations, maintenance, and engineering teams to ensure process safety is integrated into design, modifications, and operational procedures.</li>
<li>Support capital projects by reviewing process safety requirements during design and implementation phases.</li>
</ul>
Audits &amp; Continuous Improvement
<ul>
<li>Conduct internal PSM audits to assess program effectiveness and compliance.</li>
<li>Recommend and implement process safety improvements to enhance operational safety and efficiency.</li>
<li>Stay updated on emerging process safety trends, regulations, and technologies to ensure industry-leading safety practices.</li>
</ul>
Qualifications
<ul>
<li>Bachelor’s degree (BA/BS) in Chemical Engineering, Process Safety, or a related field required; a Master’s degree is a plus.</li>
<li>Minimum of 0-5 years of experience in process safety engineering within the chemical, manufacturing, or related industry.</li>
<li>Core knowledge of PSM, RMP, HAZOP, LOPA, and other process safety methodologies.</li>
<li>Experience with risk assessment tools, process modeling software (e.g., PHAST, ALOHA, or similar), and regulatory compliance.</li>
</ul>
Company DescriptionBuckman is a privately held, global specialty chemical company with headquarters in Memphis, TN, USA, committed to safeguarding the environment, maintaining safety in the workplace, and promoting sustainable development. Buckman delivers exceptional service and innovative solutions to our customers globally in the pulp and paper, leather, and water treatment sectors to help boost productivity, reduce risk, improve product quality, and provide a measurable return on investment. 
<h3>Company Description</h3>
Buckman is a privately held, global specialty chemical company with headquarters in Memphis, TN, USA, committed to safeguarding the environment, maintaining safety in the workplace, and promoting sustainable development. Buckman delivers exceptional service and innovative solutions to our customers globally in the pulp and paper, leather, and water treatment sectors to help boost productivity, reduce risk, improve product quality, and provide a measurable return on investment.

Process Safety Engineer

<h3>Job Description</h3>
Job Description
COMPANY OVERVIEW:
CERTERRA (formerly RMA Companies) is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve.
We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms.
With a 60-year history, CERTERRA has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients.
Job Overview &amp; Responsibilities: 
You will be expected to:
<ul>
<li>Interpret project plans and specifications for compliance with projects requirements</li>
<li>Prepare and submit written field reports summarizing daily activities/observations and results</li>
<li>Monitor work procedures for compliance with project specifications</li>
<li>Interact with client representative (supervisors, foremen, project managers, engineers, etc.) at project sites</li>
<li>Work outdoors in all weather conditions</li>
<li>Complete soils inspections, including:</li>
<li>Earthwork operations including placement and compaction of structural fill, utility trench backfill, subgrade preparation, excavation, placement of stone protection</li>
<li>Identifying and verifying the use of approved materials, moisture-conditioning, lift thicknesses and degree of compaction during placement of fill </li>
<li>Sampling and testing of compacted fill materials</li>
<li>Complete concrete inspections, including:</li>
<li>Concrete pre-placement inspections: reinforcing steel installation, prestressing, formwork, embeds</li>
<li>Concrete placement inspections: placement, consolidation, testing, finishing, curing, protection</li>
</ul>
Concrete post-placement inspections: surface finish, repairs, construction joint preparation, curing Education/Qualifications: The following minimum requirements apply to this position:
<ul>
<li>High School Diploma or equivalent</li>
<li>Minimum 1 year experience</li>
<li>U.S. Citizenship or legal authorization to work in the U.S.</li>
<li>Ability to work on federal military installation sites</li>
<li>Valid Driver’s License</li>
<li>Must pass background check, and must have a satisfactory driving record in accordance with the Company's driving (MVR) policy</li>
<li>Strong written and verbal communication skills</li>
</ul>
Certifications/Licenses: At least one of the following requirements must be met for this position:
<ul>
<li>ICC Soils Special Inspector Certificate</li>
<li>NICET Soils Technician Level II Certificate in Construction Material Testing</li>
<li>Geologist-In-Training or Engineer-In-Training with three years of related experience</li>
<li>PCI Quality Control Technician/ Inspector Level II Certificate</li>
<li>ICC Reinforced Concrete Special Inspector Certificate</li>
<li>ICC Pre-stressed Special Inspector Certificate</li>
<li>ACI Concrete Construction Special Inspector</li>
<li>Registered Professional Engineerwith related experience</li>
</ul>
Pay range $ 35.00 to $ 40.00 per hour.
We are an Equal Opportunity Employer. This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated on the basis of their ability, competence, and performance of the essential functions of their positions. There will be no discrimination on the basis of race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which may be protected by federal, state, or local laws. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees or job applicants who may have a physical or mental disability. Such persons will be hired on the basis of their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions.

Special Inspector

<h3>Job Description</h3>
Job Description
Join LACO – Celebrating 50 Years of Innovation!
At LACO Technologies, we have been at the forefront of vacuum and leak testing innovation for 50 years. The systems we design allow our customers to make a difference in many industries.
We are currently seeking a full-time person to perform visual and dimensional inspections of 3D parts. This role is important to ensure all custom parts and in process work meet our requirements, and to assist with other quality departmental duties.
LACO Technologies is a leading-edge technology company and manufacturer of custom Vacuum and Leak Testing Systems that serves Aerospace, Automotive, Medical/Pharmaceutical, and other technological industries, in both domestic and international markets. The work you do allows our manufacturing teams to build systems that are unique to the needs of our customers. Come work where you will get a small company feel with big company opportunities, benefits, and technology.
At LACO Technologies, we strive to give our employees a great work-life balance. Working hours for this position is an 8-hour shift, M – F, with some flexibility on the start time. Flexible scheduling options, paid holidays, and a generous PTO offering make LACO a company worth considering for employment.
Main Duties and Responsibilities: 
<ul>
<li>Perform visual and dimensional inspections of custom-made parts to ensure all items conform to drawing specifications.</li>
<li>Correctly interpret specifications on blueprints/drawings for comparison of produced materials.</li>
<li>Proficient use of precision instruments such as a micrometer, caliper, dial indicator, height gauge and other measuring equipment to ensure items meet drawing requirements.</li>
<li>Document nonconformities and communicate results to interested parties.</li>
<li>Record inspection results data in our ERP database.</li>
<li>Properly release conforming materials to the correct jobs or departments.</li>
<li>Perform in process inspections of machined parts, welds, control panels.</li>
<li>Perform final inspections of vacuum and test systems.</li>
<li>Experience with the calibration of shop tools is a plus.</li>
<li>Experience with internal audits and ISO 9001 and ISO 17025 standards is a plus.</li>
</ul>
Desired Skills and Experience
<ul>
<li>A keen eye for detail</li>
<li>Communication Skills</li>
<li>Decision-making skills</li>
<li>Time management skills</li>
<li>Computer Literacy (Microsoft office, ERP Systems)</li>
<li>Able to follow company policies, quality standards, and directions from management.</li>
<li>Able to quickly adapt to changes in priorities and workload.</li>
<li>Ability to work well both in teams and independently.</li>
<li>Experience performing weld inspections is a plus.</li>
<li>Forklift experience is a plus.</li>
<li>Calibration experience is a plus.</li>
<li>Experience performing Internal Audits with ISO 9001 or ISO 17025 is a plus.</li>
</ul>
Required Qualifications/Characteristics
<ul>
<li>2-3 years of related work experience in a manufacturing production environment.</li>
<li>Able to stand, sit, stoop, kneel, crouch, stretch, and reach with hands.</li>
<li>Must be able to lift and move up to 50 lbs.</li>
<li>Minimum high school diploma, or equivalent.</li>
<li>College degree and/or professional certification is a plus.</li>
</ul>
Compensation &amp; Benefits
<ul>
<li>Pay: $21.00 - $24.00 per hour, depending on experience.</li>
<li>Shift: Monday through Friday regular business hours, with some flexibility in start and stop times.</li>
<li>Benefits (Full-Time Employees): Generous benefits package that includes: medical, dental, vision, short and long-term disability, accident, hospital indemnity, critical illness, legal protection services, pet insurance, identity theft protection, cancer guardian, company-paid life insurance, and 401K with match, paid holidays, and a generous PTO (paid time off) plan of three weeks your first year, company paid continuing education opportunities including a tuition reimbursement program, periodic company parties, and lunches.</li>
<li>Location: Salt Lake City</li>
<li>Equal Opportunity Employer:&nbsp; All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.</li>
<li>EOE, including disability/veterans</li>
</ul>
Company DescriptionLACO specializes in designing and manufacturing specialized and custom vacuum and leak testing equipment serving domestic and international markets. At LACO, the systems that we manufacture are unique to our customers’ needs and our processes are critical to the success of our systems and customer satisfaction. LACO Technologies is committed to driving excellence and innovation. We value growth and development of our employees and strive to foster a culture of continuous learning and improvement. At LACO Technologies we strive to give our employees a great work-life balance. We offer our employees the opportunity to participate in a 9/80 work schedule giving our employees every other Friday off. This benefit, along with our flexible scheduling options and generous PTO offering makes LACO a company worth considering for employment. We are a leading-edge technology company serving the Aerospace, Automotive, Medical/Pharmaceutical, and other technology industries. LACO's customers are the likes of SpaceX, Apple, NASA, Northrop Grumman, Lockheed, Boeing, and Merck. Come work where you will get a small company feel with big company opportunities, benefits, and technology. 
<h3>Company Description</h3>
LACO specializes in designing and manufacturing specialized and custom vacuum and leak testing equipment serving domestic and international markets. At LACO, the systems that we manufacture are unique to our customers’ needs and our processes are critical to the success of our systems and customer satisfaction.\r\n\r\nLACO Technologies is committed to driving excellence and innovation. We value growth and development of our employees and strive to foster a culture of continuous learning and improvement.\r\n\r\nAt LACO Technologies we strive to give our employees a great work-life balance. We offer our employees the opportunity to participate in a 9/80 work schedule giving our employees every other Friday off. This benefit, along with our flexible scheduling options and generous PTO offering makes LACO a company worth considering for employment.\r\n\r\nWe are a leading-edge technology company serving the Aerospace, Automotive, Medical/Pharmaceutical, and other technology industries. LACO's customers are the likes of SpaceX, Apple, NASA, Northrop Grumman, Lockheed, Boeing, and Merck. Come work where you will get a small company feel with big company opportunities, benefits, and technology.

Quality Inspector

<h3>Job Description</h3>
Job Description
General Summary
Shifts 12:00 PM to 8:30 PM shift?
This position works under close supervision and is primarily responsible for performing all duties and tasks associated with one of the work cells listed below, as assigned by plant management, while adhering to quality standards according to GMP, sanitation and safety procedures. Knowledge of the SAP functions listed below must also be learned.
Principal Duties And Responsibilities
· Sets- up (assembles and disassembles), operates, adjusts and cleans equipment to produce color products and packages these finished goods according to quality, GMP, safety and sanitation stand- ards. Operations may include blending, filling and packing procedures.
· Locates, prepares, transfers and loads materials to be processed; transfers WIP or finished product to filling operation, additional processing operations, storage or shipping area.
· Prepares packing materials (drums, pails, boxes) and packaging labels and stacks or stages contain- ers for transfer. 4. Draws samples and takes to QC lab for testing per product specifications. Confers with lab technicians and supervisors and makes adjustments to the process to bring the product within specification.
· Prints and applies labels to product.
· Completes necessary paperwork or data entry for production/lab records and inventory levels.
· Follows all GMP, safety, sanitation and quality specifications and procedures.
Knowledge, Skills &amp; Abilities
Ability to read, write and speak English.
Ability to apply basic mathematical concepts to the production process including conversion of weight and volume in the metric system.
Ability to read and follow a recipe for mixing and/or blending product.
&nbsp;Ability to operate a forklift.
Ability to use basic hand tools (hammer, screwdriver, wrench) for assembly and disassembly of equipment.
Ability to communicate effectively with co-workers regarding the status of the production process.
These characteristics are normally acquired through a High School Diploma or GED with experience in a production environment preferred.
Working Conditions
Working environment is a production unit and includes frequent exposures to wet, humid, dusty, or loud conditions, moving machine parts, fumes or airborne particles and caustic chemicals. A company issued uniform is required to be worn along with personal protective equipment at all times. This can include cover- alls, dust mask, hearing protection, hair/beard net, safety glasses, gloves, and safety shoes. Work may occur in small rooms with air lock compliance to avoid interdepartmental contamination.
Company DescriptionLabor Solutions, LLC is a leader in the professional, temporary, and direct hire industry throughout the Midwest area. Our clients range from individual entrepreneurs to large corporations, and while we are big enough to serve Fortune 100 companies, we are small enough to stay nimble in an always-changing market. Thank you! 
<h3>Company Description</h3>
Labor Solutions, LLC is a leader in the professional, temporary, and direct hire industry throughout the Midwest area. Our clients range from individual entrepreneurs to large corporations, and while we are big enough to serve Fortune 100 companies, we are small enough to stay nimble in an always-changing market.\r\n\r\nThank you!

5,347 Manufacturing Jobs in Kentucky