<h3>Job Description</h3>
Job Description
About the Company
O'Fallon Casting is a global leader in the production of high-quality aluminum alloy investment castings. Since 1969, our family-owned company has been dedicated to delivering precision-engineered solutions for the aerospace, defense, and commercial markets. Operating from our modern 75,000-square-foot foundry in O'Fallon, Missouri, we specialize in complex, castings that meet the rigorous demands of the world's leading aerospace and defense contractors. Our constructive culture fosters innovation, collaboration, and excellence, ensuring that we remain at the forefront of the industry. Please consider joining our growing team
Primary Function: General machining of routine castings and the building of small fixtures for use in the finishing department. Tools and Equipment: Grinders, drill press, micrometers, calipers, dial indicators, fixtures and shims, reaming tools, tote pans, mechanics hand tools etc. Material: Aluminum, copper, and brass based castings, tapping fluids, lubricants, etc. Working Procedure: Under the guidance and direction of the department supervisor, the Machinist A, or group leader. the Machinist B shall: THE FOLLOWING ARE THE USUAL MAJOR JOB DUTIES BUT THIS JOB DESCRIPTION DOES NOT PRECLUDE THE PERFORMANCE OF OTHER DUTIES BY THE INCUMBENT. Shall adhere to all safety requirements as posted on the job safety card. Shall consistently follow all applicable work instructions. Shall receive daily work assignments from the department supervisor or group leader. Shall setup drill press, milling machines, and/or lathe to machine castings and build fixtures as required. Shall work from casting blueprints to machine castings, and verify accuracy of work to customer specifications through the use of various measuring instruments such as micrometers, caliper, indicator, etc.. Shall be proficient in the use of various mechanics hand tools, such as a chisels, hammer, punches, wrenches, files, etc. Shall move the castings to the next operation per the process sheet. Shall maintain all labor vouchers, records, and files, in addition to a variety of logs where accuracy is paramount, and enter all required information into the Company software in a timely manner. Shall maintain work area in a clean and orderly condition. Shall attend and successfully complete hazardous material / waste handling classes. Shall attend and successfully complete training in the proper techniques of lifting. Shall attend and successfully complete lock out / tag out training. Shall perform other duties as assigned. Work Environment: Shall work in an area where airborne grinding dust is present.
Special Skills Required: Requires a technical school diploma in precision machining technology or one year of machining experience. Must be proficient in reading and interpreting casting blueprints. Must have good working knowledge of personal computers and related software. Must be able to handle the physical demands of the job.

Machinist B 2nd Shift

<h3>Job Description</h3>
Job DescriptionWe're seeking team members who desire a career in manufacturing, enjoy setting up and operating equipment and will ensure great quality product goes to our customers. We're hiring and excited to meet you!
What You’ll Be Doing:
While beginning training to understand and operate CNC laser equipment, employee will assist with setting up tools and equipment to operate CNC laser equipment. He or she must form/cut material as specified by work order and specific blueprints and diagrams and complete the necessary quality inspections of product. More experienced operators may perform independent setup following orientation and initial training. 
Essential Duties and Responsibilities include the following.Others as assigned. 
<ul>
<li>Assist with setup of machine, tooling, and fixtures.</li>
<li>Use beginner’s knowledge of M&amp;G code and makes minor adjustments to meet production goals.</li>
<li>Use appropriate measuring tools to assure required quality standards are met. </li>
<li>Follow all verbal and written instructions pertaining to the operation of the CNC laser machine and related equipment as well as any other jobs to which he/she may be assigned.</li>
<li>Produce quality parts, which include the placement of raw material, assisting in the removal of parts and packing, and cutting parts by hand (where applicable).</li>
<li>Successfully complete all training, including RFC Academy (JIT, 5-S, Lean Manufacturing, Kaizen and Six Sigma, SPC), Basic Quality, Math, Blueprint Reading, and CNC trainee-level courses as required.</li>
<li>Use a working knowledge of computers including manufacturing software/business systems in order to create Work-In-Process or Finished Goods/Inventory Tickets. Also use set-up charts, address rework/defective parts, complete end of shift paperwork, review route sheets, and understand tool storage/staging operation</li>
<li>Follow safety guidelines, handle parts and practice general housekeeping. </li>
</ul>
Earning potential: Trainee range is $23/hr. with opportunity for pay-for-skill promotions and time-based pay adjustments. Apprentice at $24/hr.; Qualified $25.50/hr.; Certified $27.25 and Master $30.00/hr.
Summary: While beginning training to understand and operate CNC laser equipment, employee will assist with setting up tools and equipment to operate CNC laser equipment. He or she must form/cut material as specified by work order and specific blueprints and diagrams and complete the necessary quality inspections of product. See attached description for details.
 
Open Shifts: We are currently seeking candidates for WE-Nights 
WE/N: 6:00PM - 6:00AM Friday, Saturday &amp; Sunday $4.50/hr. shift premium
* Employees hired for Weekend shift will train on 1st shift. 
 
Qualifications: 
<ul>
<li>One to three months of related experience and/or training; CNC machines, machine set-up, metalworking, welding/fabrication</li>
<li>Computer Skills are required - to perform this job successfully, an individual should have knowledge of Manufacturing software and ability to learn how to new programs</li>
<li>Able to lift 75 lbs. on a regular basis</li>
<li>Able to work shift assigned and overtime as needed. </li>
</ul>
Preferred:
<ul>
<li>Consistent experience in manufacturing setting in set-up and machine operation or metal fabrication. This could include: Setting up/running CNC equipment, Performing part quality inspections, Blueprint reading, Experience with making adjustments to CNC programs</li>
<li>Strong work history including good longevity in previous roles </li>
</ul>
Who We Are 
voestalpine Roll Forming Corporation, or RFC as we call it, supplies custom roll formed metal components into several industries including Aerospace, Construction, Material Handling, Off-Highway, Office Furniture, Solar and Transportation. In 2000, Roll Forming Corporation was acquired by globally leading technology group voestalpine AG and became part of the Metal Forming, Tubes and Sections division. Today, voestalpine Roll Forming Corporation has seven production facilities across three states with five facilities and headquarters located in Shelby County, Kentucky and one facility each in Pennsylvania and Indiana.
What We Offer You
<ul>
<li>Several great benefit plans, including multiple health insurance options, vision, dental, life, short-term and long-term disability coverage, health-saving accounts, or flexible spending account</li>
<li>401K or 401K Roth up to 6% Match</li>
<li>Quarterly Profit-Sharing Bonus. </li>
<li>Apprenticeship programs &amp; tuition reimbursement opportunities</li>
<li>Paid time off benefits including holidays immediately, vacation and personal-sick days after 60 days</li>
<li>Leadership training opportunities</li>
<li>TogetherWeCare, a philanthropic volunteer program that allows employees to support their community while on company time</li>
<li>Countdown to Zero, a global environmental impact initiative that strives to make our work environments more efficient and environmentally friendly</li>
</ul>
 
 
voestalpine Roll Forming Corporation is an At Will employer. Employment will be at-will, which means that either the employee or the employer may terminate the employment relationship at any time, with or without prior notice, and with or without cause.
It is the intention of Roll Forming Corporation to fill job vacancies from within the organization when employees with the skills and qualifications for that position are available. Promotions and transfers will be made without regard to age, race, color, sex, sexual orientation, gender identity, religion, disability, veteran’s status, national origin and any other federal, state, or locally-protected classifications.

CNC Laser Operator Trainee

<h3>Job Description</h3>
Job Description
HiFyve is hiring a CNC Machinist &amp; Programmer in the Manufacturing industry in Lee’s Summit, MO!
 
Salary: $26.00 - $36.00 per hour (based on experience)
Shift: 2nd Shift (3:00pm–11:30pm), Monday–Friday with overtime as needed
Location: Lee’s Summit, MO
 
 
Job Duties and Responsibilities
 
<ul>
<li>Set up, adjust, and operate CNC machines (3, 4, and 5 Axis) to perform precision machining operations.</li>
<li>Align and secure holding fixtures, cutting tools, attachments, and materials onto machines.</li>
<li>Monitor machine feeds and speeds during machining to ensure accuracy.</li>
<li>Measure, examine, and test completed parts using precision instruments (micrometers, calipers, etc.) to verify conformance to specifications.</li>
<li>Document work performed through required paperwork and records.</li>
<li>Perform minor mechanical and assembly tasks as needed.</li>
<li>Share expertise and provide guidance to peers within the machine shop.</li>
<li>Maintain safety standards and protect machines from potential damage.</li>
<li>Follow all safety policies and procedures consistently.</li>
<li>Perform other duties as assigned by leadership.</li>
</ul>
 
 
Education Requirements
 
<ul>
<li>High School Diploma or GED required</li>
</ul>
 
 
Knowledge, Skills and Abilities
 
<ul>
<li>Minimum of 5 years of machining experience with advanced knowledge of machining operations and tolerances</li>
<li>Strong understanding of basic math and geometric tolerances</li>
<li>Ability to read and interpret blueprints, engineering plans, and work instructions</li>
<li>Forklift and crane operation skills (with ability to safely operate equipment)</li>
<li>Physical ability to lift up to 50 lbs.</li>
<li>Preferred: 15+ years CNC machining experience, MasterCam knowledge, GD&amp;T and CMM inspection methods</li>
<li>Preferred: Familiarity with SPC, Lean Manufacturing, and process improvement practices</li>
</ul>

CNC Machinist / Programmer

<h3>Job Description</h3>
Job Description$25.00-30.00/hour 1st Shift 1st shift Manual Machinist We are currently seeking highly-skilled Machinists to work in our manual machining department.&nbsp; Will need to be proficient in setting up and operating knee mills and engine lathes.&nbsp; Skills/Qualifications:
<ul>
<li>Conceptual Skills, Process Improvement, Verbal Communication, Functional and Technical Skills,&nbsp;Controls and Instrumentation, Supply Management, Tooling, Coordination, Inventory Control, Attention to Detail, Good Judgment.</li>
<li>Proficient in interpreting blueprints and creating a plan to machine a part to specifications with little to no instruction.</li>
<li>Ability to document the process used to manufacture the part to simplify future set-ups.</li>
<li>Should be mechanically inclined and have the ability to troubleshoot and think on your feet.</li>
<li>Must be able to use sine bars, offset boring heads, boring bars, and other cutting tools to produce tight tolerance features.</li>
<li>Minimum 5 years’ experience with manual mills, lathes, etc.</li>
<li>Must be able to communicate with other shifts and work well in a team environment.</li>
<li>Jig grinding, honing, and broaching experience is helpful.</li>
<li>Knowledge of basic shop math and trigonometry.</li>
</ul>
 Duties:
<ul>
<li>Plans machining by studying work orders, blueprints, engineering plans, materials, specifications,&nbsp;orthographic drawings, reference planes, locations of surfaces, and machining.</li>
<li>parameters;&nbsp;interpreting geometric dimensions and tolerances (GD&amp;T).</li>
<li>Sets-up mills and lathes by installing and adjusting three- and four-jaw chucks, tools, attachments,&nbsp;collets, bushings, cams, gears, stops, and stock pushers; indicating vices; tramming heads.</li>
<li>Verifies settings by measuring positions, first-run part, and sample workpieces, adhering to&nbsp;international standards.</li>
<li>Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling&nbsp;and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting&nbsp;processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to&nbsp;quality assurance procedures and processes.</li>
<li>Maintains safe operations by adhering to 5S + 1 safety procedures and regulations.</li>
<li>Maintains equipment by completing preventive maintenance requirements, following manufacturer's&nbsp;instructions, troubleshooting malfunctions, calling for repairs.</li>
<li>Maintains continuity among work shifts by documenting and communicating actions, irregularities,&nbsp;and continuing needs.</li>
<li>Documents actions by completing production and quality logs.</li>
<li>Updates job knowledge by participating in educational opportunities; reading technical publications.</li>
</ul>

Manual Machinist

<h3>Job Description</h3>
Job Description
PharmEng Technology has been providing quality services to leading manufacturers of healthcare and pharmaceutical products since 1997. Our specialists hold expertise in Commissioning and Qualification, Validation, Quality Systems, Regulatory Affairs, Engineering, and Training to ensure that our clients can keep on providing the world with their cost-effective and high-standard healthcare products.
Job required Qualification:
<ul>
<li>Bachelor of Science degree, Engineering, or Equivalent training and experience.</li>
<li>More than 5 years of experience in a regulated environment.</li>
<li>3 years of experience authorizing procedural and commercial marketing documents.</li>
<li>More than 3 years of experience with clean rooms, aseptic suites, single-use technology, bioreactors, and cell culture.</li>
<li>Experience in mechanic and Industrial engineering </li>
<li>Strong working knowledge of pharmaceutical industry regulations (GMP, GDP, ICH, etc.)</li>
<li>Strong understanding and working knowledge of project lifecycle, entrepreneurial mindset, and excellent written and verbal communication skills.</li>
<li>Strong relationship management, leadership, and organizational skills.</li>
<li>Strong working knowledge in Microsoft suites, and Smartsheet.</li>
</ul>
Job responsibilities and Duties:
<ul>
<li>Develop and execute equipment qualification protocols for all manufacturing, processing, and packaging equipment and facilities/utilities supporting these operations.</li>
<li>Develop and execute process validation protocols for all manufacturing and packaging processes of commercial products (and R&amp;D products as applicable).</li>
<li>Develop and execute validation/verification protocols for all commercial and R&amp;D manufacturing, processing, and packaging equipment.</li>
<li>Analyze data, utilizing statistical methods, generated by validation studies performed by the Validation group to determine process capabilities.</li>
<li>Gather photocopies and compile relevant documentation such as executed batch records, certificates of analysis, equipment logs, equipment qualifications, raw material certificates of analysis.</li>
<li>Investigate and resolve deviations/exceptions from the predefined acceptance criteria.</li>
<li>Draw conclusions from data, observations, deviation/exception, and investigation as to whether the process is considered valid.</li>
<li>Write summary reports (closeout report when applicable) for validation/qualification protocols following criteria as outlined within the validation/qualification procedures and policies.</li>
<li>Maintain protocols and system documentation in an orderly library so that information can be provided to regulatory bodies in a timely manner.</li>
<li>Ensure protocols, verifications, validation plans, and summary reports generated during validation/ qualification activities are stored according to the procedure.</li>
<li>Maintain current knowledge in the areas of compliance and validation and other regulatory issues that may impact the Company. Work proactively to maintain the highest level of compliance in all areas. Gather current knowledge from QA/QC, regulatory, periodicals, and/or appropriate training programs.</li>
<li>Interact and coordinate compliance efforts with other departments including, but not limited to, Operations, Engineering, QA, laboratories (QC and R&amp;D), and R&amp;D to provide a high degree of assurance that all qualification/validation activities, where appropriate, are completed.</li>
<li>Adhere to all cGMPs, compliance/regulatory mandates and quality requirements.</li>
<li>Perform other related duties as assigned to meet departmental and Company objectives.</li>
</ul>

Validation Engineer

<h3>Job Description</h3>
Job Description
We are looking for a Mobile Service Technician to join our growing team! The right candidate will have a strong service technician background. Previous experience is preferred but not required.&nbsp; The day-to-day duties include traveling in the Mobile Service van to customer workplaces and homes to handle basic service needs and recalls.&nbsp;
By working at a Ford dealership, you can be a part of a brand that honors the past, and is invested in the future. Join the Ford Family where we value service to each other and the world as much as to our customers!
Benefits:
<ul>
<li>
Health, Medical and Dental
</li>
<li>
401K Plan
</li>
<li>
Paid time off and vacation
</li>
<li>Tools and laptop provided</li>
<li>
Growth opportunities
</li>
<li>
Employee vehicle purchase plans
</li>
<li>Vehicle provided</li>
<li>
Family owned and operated
</li>
<li>
Long term job security
</li>
<li>
Flexible Work Schedule
</li>
</ul>
Responsibilities:&nbsp;
<ul>
<li>
Provide an exceptional customer experience to drive loyalty
</li>
<li>
Engage with many different customers each day and represent the dealership
</li>
<li>
Organize and prepare for the day’s appointments
</li>
<li>
Perform vehicle repairs and/or maintenance work as outlined on repair order in a clean and efficient manner
</li>
<li>
Communicate with Parts Department and Service Advisors regularly to effectively manage production and customer communication
</li>
<li>
Accurately document vehicle repairs/work performed on the repair order
</li>
<li>
Stay informed of Ford technical bulletins and complete required training
</li>
<li>
Able to work occasionally in challenging weather conditions
</li>
<li>
Able to drive and maintain a company vehicle responsibly
</li>
</ul>
Qualifications:
<ul>
<li>
Detail-oriented and organized
</li>
<li>
Valid driver license
</li>
<li>
Ford certifications are desirable but not mandatory
</li>
<li>
Service Technician experience preferred
</li>
<li>
Strong use of technological devices including tablets
</li>
<li>Has state inspection and emissions license</li>
</ul>
We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Mobile Service Technician

<h3>Job Description</h3>
Job Description
Join a team that values innovation, collaboration, and work-life balance. At Anderson Engineering, we combine technical excellence with a culture built on respect, flexibility, and meaningful work. With generous benefits, supportive leadership, and a collaborative atmosphere, our team is empowered to succeed—both professionally and personally.
We’re seeking a Senior Electrical Engineer to lead and contribute to a variety of high-impact projects. Reporting to the Electrical Engineering Department Head, you’ll be responsible for delivering high-quality technical documents and ensuring a high level of customer satisfaction by clearly communicating expectations internally and externally. You’ll collaborate across disciplines, support business development efforts, and model a proactive, team-focused approach to project delivery. A large portion of the work we do at Anderson Engineering involves a diverse portfolio of project types to meet the needs of the Department of Veterans Affairs. Knowing that our work plays a vital role in impacting Veterans’ and their families’ lives and wellbeing on a daily basis offers a great sense of personal reward and satisfaction. As a Service-Disabled Veteran Owned Small Business (SDVOSB) this is the cornerstone of our work, and our team is deeply connected to continuing this mission.
Requirements
Key Responsibilities
<ul>
<li>Lead the design of power distribution systems (low and medium voltage) for a variety of facility types, including medical, utility, industrial, and commercial.</li>
<li>Perform electrical studies such as load flow, short circuit, arc flash, harmonics, and coordination.</li>
<li>Prepare detailed engineering documents, equipment specifications, and data sheets aligned with project scope and electrical engineering principles.</li>
<li>Oversee sizing and selection of electrical equipment.</li>
<li>Provide construction observation, inspection, and field support during startup and commissioning.</li>
<li>Review shop drawings, submittals, and interface with suppliers, clients, and cross-disciplinary teams.</li>
<li>Understand and integrate architectural, mechanical, civil, and structural considerations into electrical design.</li>
<li>Manage projects as assigned, including directing team members and subcontractors.</li>
<li>Support business development through proposal writing and client engagement.</li>
<li>Approve final electrical selections and drawing submittals.</li>
<li>Mentor junior staff and contribute to cross-functional technical support.</li>
</ul>
Qualifications &amp; Skills
<ul>
<li>Minimum 8–10 years in electrical engineering, with demonstrated expertise in electrical power system design.</li>
<li>Strong background in designing systems across utility and infrastructure projects.</li>
<li>Extensive Revit experience for building and site electrical systems.</li>
<li>In-depth knowledge of relevant codes: NEC, NFPA, IBC, Life Safety Code, etc.</li>
<li>Excellent communication, interpersonal, and presentation skills.</li>
<li>Effective team leader who thrives in a collaborative environment.</li>
<li>Strong attention to detail, adaptability, and organizational skills.</li>
<li>Comfortable working directly with clients, consultants, and internal teams.</li>
</ul>
Education &amp; Certification
<ul>
<li>Bachelor’s degree in Electrical Engineering.</li>
<li>Professional Engineer (P.E.) registration in Minnesota required; licensure in additional states is a plus.</li>
</ul>
Travel Requirements
<ul>
<li>Willingness to travel up to 30% for site visits and client meetings.</li>
<li>Must have a valid driver’s license and be insurable for rental or company vehicles.</li>
<li>Must meet all requirements to travel commercially without restrictions.</li>
</ul>
Benefits
Anderson Engineering offers a competitive and comprehensive benefits package, including:
<ul>
<li>401(k) with company match and profit sharing</li>
<li>Health insurance (medical, dental, and vision)</li>
<li>Generous paid time offand sick leave</li>
<li>Flexible work schedules and opportunities for remote work</li>
<li>Supportive team culture focused on work-life balance and professional growth</li>
</ul>
Located in Plymouth, MN Anderson Engineering is a small but rapidly growing engineering, architecture and design firm with big firm resources. Our clientele range from single family homeowners and developers to the United States Government, providing us an extensive background and depth to be able to address all varieties of projects. Our small firm environment and culture offers an opportunity to work on all aspects of projects as we challenge you to reach your full technical/problem-solving potential, advance your knowledge and advance your career! If you're ready to make an impact in a dynamic, people-first company with exciting projects and a strong team, we’d love to hear from you!

Senior Electrical Engineer

<h3>Job Description</h3>
Job Description
Job description:
Set-Up Operator III
Location:&nbsp;Las Piedras, PR
Post-Training Schedule:
<ul>
<li>Monday to Friday, 9:30 PM – 6:00 AM</li>
<li>Pay Rate: $13.50/hr</li>
</ul>
Job Description: The&nbsp;Set-Up Operator III&nbsp;will be responsible for the operation and configuration of automatic and complex machines in the LIGHTSPEED department. This highly mechanical and technical role requires working with automated machinery, interpreting specifications, and inspecting parts to ensure compliance with quality standards.
Key Responsibilities:
<ul>
<li>Operate and configure automatic and complex machines.</li>
<li>Make, interpret, and apply specifications for manufacturing processes.</li>
<li>Inspect parts in accordance with established guides and quality standards.</li>
</ul>
Required Qualifications:
<ul>
<li>Education:&nbsp;Technical Degree in Mechanics, Tooling, or Electro-Mechanics.</li>
<li>Education:&nbsp;High school diploma ( Set up operator II)</li>
<li>Experience:</li>
<li>Minimum&nbsp;two (2) years&nbsp;of experience in related manufacturing work (set-up), including pneumatic and mechanical equipment&nbsp;if holding a technical degree.</li>
<li>If a technical degree is not held, a&nbsp;minimum of five (5) years&nbsp;of related work experience is required.</li>
</ul>

Set-Up Operator/ Operador de Configuracion

<h3>Job Description</h3>
Job Description
Summary: Astrodyne TDI is seeking a skilled and hands-on Senior Electrical Engineer to join our Transformer Business Unit in Foster City, California. This individual will lead the design and development of power conversion systems, including low, medium, and high voltage transformers &amp; inductors, working closely with a multidisciplinary team. The ideal candidate will have a strong background in electrical design, project execution, and customer-focused engineering, and enjoy working on innovative products for industrial, medical, military, and aerospace applications. 
Responsibilities:
<ul>
<li>Lead the design and development of low, medium, and high voltage transformers, inductors, power distribution units, and power conversion and control products.</li>
<li>Collaborate with program management and cross-functional teams, including sales, procurement, mechanical, and manufacturing engineering.</li>
<li>Generate product specifications for new R&amp;D efforts and customer requirements.</li>
<li>Apply tools such as Cadence, Creo, and Rale to model and analyze electrical designs.</li>
<li>Generate complete manufacturing documentation, including schematic diagrams, bills of materials (BOMs), assembly drawings, work instructions, and test procedures.</li>
<li>Perform MTBF and DFMEA analyses to validate reliability and mitigate design risk.</li>
<li>Develop and execute design verification test (DVT) procedures and support root cause analysis and troubleshooting.</li>
<li>Directly interface with customers to ensure product performance aligns with application and compliance requirements.</li>
<li>Serve as a technical mentor to junior engineers and support best practices for design for manufacturability (DFM) and engineering excellence.</li>
</ul>
Required Qualifications:
<ul>
<li>Bachelor's degree in electrical engineering.</li>
<li>Minimum of 3 years in medium or high voltage electrical systems design.</li>
<li>Proven experience in transformer and power system development.</li>
<li>Deep understanding of electrical components used in power conversion and transformer applications.</li>
<li>Familiarity with agency compliance (UL, CSA, VDE, CE).</li>
</ul>
Preferred Tools &amp; Skills:
<ul>
<li>Proficiency with Cadence, Creo, Rale.</li>
<li>Familiarity with medium and high voltage design practices and manufacturing techniques.</li>
<li>Strong analytical, communication, and technical leadership skills.</li>
</ul>
Salary Range: $125,000-$175,000
AAP/EEO Statement
Astrodyne TDI is an Equal Opportunity / Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or creed, sex, sexual orientation, gender identity, national origin, age, citizenship status, marital status, disability, military status, genetic information, or any other legally protected status.

NOTICE TO THIRD PARTY AGENCIES:
Please note that Astrodyne TDI does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, Astrodyne TDI will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, Astrodyne TDI explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of Astrodyne TDI.

<h3>Job Description</h3>
Job Description
Can you work in a fast paced environment? Do you want to increase your CNC skills? Can you work as team? Can you use your CNC skill to problem solve? If you answered yes, you are who we are looking to join our team. All levels of CNC experience are welcome to apply. Qualifications:
<ul>
<li>Experienced in operating of CNC equipment.</li>
<li>Understand how to use basic inspection equipment.</li>
<li>Knowledge of Haas controls and Fanuc controls</li>
<li>Creative thinking and problem solving skills</li>
<li>Ability to work in fast paced work environment</li>
<li>Ability to read and interpret CAD drawings and blueprints</li>
</ul>
Job Duties:
<ul>
<li>Operate CNC equipment and do some set ups.</li>
<li>Edit, make offsets and tool changes on CNC equipment</li>
<li>Select and find tooling required for jobs</li>
<li>Do in process inspection of parts to print specification</li>
<li>Will make prototypes and medium production runs</li>
<li>Work on CNC turning and vertical milling centers with 4 axis and 5 axis capabilities.</li>
<li>**Train and work with Fanuc Robot</li>
<li>Work on parts in wide variety of industries (military, medical, commercial electronics, communications, industrial)</li>
</ul>
Work Environment: Clean well lighted shop Air Conditioned Full Time 2nd Shift Monday - Thursday 3:00 pm to 1:00 am Competitive wages determined by experience and qualifications Health Insurance offered along with dental and vision. Vacation and holiday pay Company sponsored retirement plan

5,509 Manufacturing Jobs in Young America Township