<h3>Job Description</h3>
Job Description
Looking to level up your career and boost your income? At Voyage Healthcare, we help connect nurses, therapists, and allied health pros with high-paying travel jobs at top-rated facilities across the U.S. With thousands of openings nationwide, you can earn up to $3,500+ per week (depending on your specialty, location, housing, and benefits)—all while making a real impact on the communities that need you most. Let your next adventure start with us!
Position: ALLIED-X-Ray Tech (Travel/Contract)
We're hiring experienced ALLIED-X-Ray Tech for a 13-week contract in Robbinsdale, Minnesota — earn up to ($2478 - $2608 per week) while providing essential care at a leading facility. Most candidates will need to have at least 2 years of recent experience in the specialty.
Apply &amp; Call us today at 800-798-6035 for details on this opportunity.
Position Details
Specialty: ALLIED-X-Ray Tech
Location: Robbinsdale, Minnesota
Employment Type: Travel/Contract
Pay: $2478 - $2608 per week
Shift: 5x8 Flex
Start Date: ASAP
Contract Length: 13-week

Travel ALLIED-X-Ray Tech in Robbinsdale, Minnesota

<h3>Job Description</h3>
Job Description
Engineer, Sr
Juno Beach, Florida 12 months
Overview of the Role: Seeking a Project Engineer supporting solar farm design and construction. You will be responsible for managing 3rd party contractor teams to develop engineering designs for solar projects. Project engineering responsibilities span from initial concept definition to construction and final commissioning and require continuous coordination with diverse project stakeholders such as environmental, procurement, transmission services, and project managers for both early stage and construction. A successful candidate will have experience applying value engineering to balance reliability, cost, and performance for complex systems, along with thorough knowledge of the various applicable engineering disciplines including electrical, structural, civil, and materials. A preferred candidate will have experience successfully managing schedules and budgets for major capital projects.
 
Required Skills &amp; Qualifications:
<ul>
<li>Bachelor of Science in Engineering (Electrical, Civil, Mechanical, Aerospace, or Chemical)</li>
<li>Minimum -Bachelor of Science in Engineering. This is a requirement. Discipline can be electrical, civil, mechanical, aerospace or chemical.</li>
<li>Minimum of 5 years experience. Exceptions can be made for less than 5 years if that experience is a good match</li>
<li>Engineering and project management experience on utility scale solar projects is preferred</li>
<li>Engineering and project management in the following fields may also be considered: -DG/commercial solar -Other technologies in the power industry wind, BESS, combined cycle, nuclear, hydrogen, substation, transmission, etc -Strong candidates with experience outside of the power industry (aerospace, civil/stormwater, etc)</li>
<li>Great communication, leadership and project management skills </li>
</ul>
Perks of Working with AP Recruiters &amp; Associates:
<ul>
<li>Competitive pay rate (depending on experience)</li>
<li>Career growth opportunities in the expanding renewable energy sector</li>
<li>Professional support and guidance throughout your contract</li>
<li>Access to cutting-edge projects with industry leaders</li>
</ul>
About the Client: Our client is a leading clean energy company and one of the largest electric utilities in the United States. They are at the forefront of the clean energy transition, operating one of the largest solar development programs in the country. With a strong commitment to sustainability and innovation, they continue to invest in renewable energy infrastructure and storage solutions. The company is recognized for its environmental stewardship and plays a crucial role in building America's clean energy future through strategic investments in solar, wind, and battery storage technologies.

Engineer, Sr 8XY349VR

<h3>Job Description</h3>
Job Description
Office Engineer for a NYSDOT Region 10 job starting soon. Candidate must be Site Manager trained with specific NYSDOT office engineering experience.
Company DescriptionFounded in 1984, TriState Planning Engineering &amp; Land Surveying, P.C. (TSPE), a full-service, certified D/WBE engineering and consulting firm, has provided over 30 years of excellence in construction monitoring/management services, inspection services, aviation design, site civil design, planning, program management and land surveying. TSPE is committed to personal, professional service and works with each of our clients through all phases of the project. TSPE’s staff of construction managers, NICET certified inspectors, land surveyors, technicians, CADD technicians and engineers, have designed, inspected and constructed facilities for government, institutional, airport and private clients including: NYCDDC, NYCDPR, NYCDOT, NYCDEP, NYSDOT, NYSTA, NYS Parks, PANYNJ, MTA, NCDPW, SCDPW, WCDPW, along with other local towns and municipalities. TSPE continues to cultivate a talented and experienced staff as we strive to become a preferred construction inspection, design and land surveying provider. 
<h3>Company Description</h3>
Founded in 1984, TriState Planning Engineering &amp; Land Surveying, P.C. (TSPE), a full-service, certified D/WBE engineering and consulting firm, has provided over 30 years of excellence in construction monitoring/management services, inspection services, aviation design, site civil design, planning, program management and land surveying. TSPE is committed to personal, professional service and works with each of our clients through all phases of the project. TSPE’s staff of construction managers, NICET certified inspectors, land surveyors, technicians, CADD technicians and engineers, have designed, inspected and constructed facilities for government, institutional, airport and private clients including: NYCDDC, NYCDPR, NYCDOT, NYCDEP, NYSDOT, NYSTA, NYS Parks, PANYNJ, MTA, NCDPW, SCDPW, WCDPW, along with other local towns and municipalities. TSPE continues to cultivate a talented and experienced staff as we strive to become a preferred construction inspection, design and land surveying provider.

Office Engineer

<h3>Job Description</h3>
Job Description
About Us
Larson Design Group (LDG) is an award-winning, employee-owned Architecture, Engineering, and Consulting Firm. Guided by our core values, we’re expanding our team, opening new offices, and adding new offerings to provide responsive, innovative solutions to clients nationwide.&nbsp;&nbsp;&nbsp;
Being 100% employee-owned directly impacts our culture: it drives our decision-making, motivates our teams, increases our productivity, improves retention, and contributes to the future success of our company. Our culture is one where we work hard for our clients and for each other – and we have fun collaborating, sharing experience and expertise, and learning along the way. We’re passionate about delivering exceptional quality, elevating client relationships, enriching the careers and lives of our employee owners, and enhancing the communities where we live and serve.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
At LDG, we strive to create an organization where people want to work. We offer a flexible work environment, paid training for required licensures, competitive benefits, bonus plans, and a company-funded Employee Stock Ownership Plan (ESOP) while supporting your professional and personal growth.&nbsp;&nbsp;&nbsp;&nbsp;
Your Opportunity + Impact
As a Traffic Engineer Associate, you will support the planning, analysis, and design of transportation infrastructure with a focus on traffic operations and safety. You will work as part of a multidisciplinary team to assist in the development of Traffic Impact Studies, signal and signing plans, pavement marking layouts, and other traffic engineering deliverables. This position requires an Engineer-in-Training (EIT) certification and foundational experience applying engineering principles to real-world projects. Under the guidance of senior engineers, you will contribute to technical analyses, design calculations, report preparation, concept development and design, and project coordination efforts across departments. Additionally, you will assist in providing planning, data analytics, and technical support services to state planning partners, municipalities, and other public agencies. This role offers opportunities to grow your professional skills and work toward PE licensure.
Key Responsibilities
<ul>
<li>Assist senior staff in preparing Traffic Impact Studies, Transportation Assessments, corridor and multimodal planning efforts, alternatives analyses, Signal Warrants, and other traffic engineering analyses and reports.</li>
<li>Support the development and review of conceptual and final designs for traffic signals, signing and pavement marking, and traffic control plans in accordance with PennDOT, AASHTO, and MUTCD standards.</li>
<li>Conduct and lead traffic data collection efforts, including traffic counts, turning movement counts, and speed studies, ensuring accurate data for analysis and design.</li>
<li>Analyze crash data and contribute to safety countermeasure recommendations following PennDOT guidance and the Highway Safety Manual (HSM).</li>
<li>Perform and review design calculations, technical specifications, cost estimates, and plan drawings to ensure accuracy and compliance with project requirements.</li>
<li>Draft and review technical reports, correspondence, and client deliverables that clearly communicate analysis results and design recommendations.</li>
<li>Review submittals, coordinate project submissions, and assist with meeting deadlines and client expectations.</li>
<li>Conduct field inspections and support site visits to verify compliance with design specifications and project progress.</li>
<li>Research, interpret, and apply relevant regulations, codes, and permit standards to project work.</li>
<li>Maintain organized project documentation and support quality assurance/quality control processes to enhance deliverable quality and reduce errors.</li>
<li>Collaborate effectively across LDG departments and multidisciplinary teams to support project delivery within assigned budgets and schedules.</li>
</ul>
Education and Experience
<ul>
<li>Bachelor’s or Master’s degree in Civil Engineering or a related field from an ABET-accredited program.</li>
<li>Minimum of two (2) years of experience in traffic engineering or transportation design, with a solid understanding of PennDOT, AASHTO, and the Highway Capacity Manual (HCM) specifications, standards, and procedures.</li>
<li>Engineer-in-Training (EIT) certification required.</li>
<li>Proficiency in traffic analysis software such as Synchro/SimTraffic, HCS, and VISSIM, along with strong skills in Microsoft Office applications including Excel, Word, PowerPoint, and Outlook.</li>
</ul>
Preferred Qualifications
<ul>
<li>Proven ability to deliver high-quality work on time and within budget while managing multiple tasks and priorities efficiently.</li>
<li>Excellent written and verbal communication skills, enabling effective collaboration across multidisciplinary teams and strong engagement with clients and stakeholders.</li>
<li>Self-motivated and highly organized, with the ability to work independently and as an integral part of a team.</li>
<li>Strong commitment to professional development and a desire to continuously expand knowledge and take on new responsibilities.</li>
<li>Familiarity with PennDOT policies and procedures, including DM-2, DM-3, TIS Guidelines, ECMS, and design standards from AASHTO and the MUTCD.</li>
</ul>
EEO Statement
Larson Design Group, Inc. is an Affirmative Action and Equal Opportunity Employer (EEO) that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization.
Powered by JazzHR
fQQsjEoSro

Traffic Sr. Engineering Associate

<h3>Job Description</h3>
Job Description
EXPERIENCED FIELD TECHNICIANS NEEDED IN ROSELAND, OH
Cennox is seeking an enthusiastic Field Technician&nbsp;to join our expanding Field Services division. We are looking for passionate, experienced field professionals that are ready to work in an environment that allows you to grow as Cennox grows...Those with exceptional customer service and who can thrive&nbsp;in&nbsp;a dynamic team culture should apply. Also, willing to be cross trained to support our other lines of business, banking and retail.&nbsp;
WHY SHOULD YOU JOIN THE CENNOX FAMILY?
<ul>
<li>Competitive Pay&nbsp;&amp; Paid Training</li>
<li>Company Vehicle</li>
<li>Total Benefits Package including Retirement, Health, Dental, Vision,&nbsp;Life Insurance &amp; more&nbsp;</li>
<li>Paid Holidays, Vacation &amp; Sick Package</li>
<li>Company-provided tools, uniforms, and Android smartphone</li>
<li>Flexible work schedule, paid training, and opportunity for travel</li>
<li>Opportunity to continue to learn new skills, grow&nbsp;and advance your career</li>
</ul>
WHAT YOU'LL DO:
In this role,&nbsp;you will service our customers by performing preventative maintenance, installation,&nbsp;determining issues with products, and training customers on the proper use of financial equipment throughout Mansfield, OH and surrounding areas. This position offers the chance to become part of a rapidly growing company.&nbsp;
WHAT YOU'LL BRING:
<ul>
<li>3+ years experience with low voltage electronics, mechanical systems, and computer experience; Safe or ATM Technical experience is a plus</li>
<li>Electro-mechanical skills a must, ability to use basic hand tools including but not limited to multi-meter, voltmeter, volt-ohm meter</li>
<li>Working knowledge of Microsoft Office (Word, Outlook, Excel)</li>
<li>Experience with mapping and routing applications such as MapPoint or Google Maps</li>
<li>Ability to learn through telephone training</li>
<li>Great communication/customer service skills and ability to interpret/execute written instructions</li>
<li>Valid driver's license with a driving record in good standing and a reliable/insured vehicle</li>
<li>Ability to communicate and provide excellent customer service</li>
<li>Ability to lift/move 50 or more pounds, stand, climb, bend, stoop, and reach freely</li>
<li>Ability to work both indoors and outside in all-weather and sit/drive for extensive daily travel</li>
<li>Good hand/eye coordination and sharp eyesight</li>
<li>A valid Driver's License and driving record in good standing</li>
</ul>
Cennox is an Equal Opportunity Employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic under applicable law. Notice on Use of AI in Hiring As part of our commitment to fair and efficient hiring practices, Cennox uses JazzHR’s TalentFit AI tool to assist in evaluating candidate applications. This technology helps us match applicants to job requirements based on qualifications and experience. All hiring decisions are ultimately made by our human recruiting team. If you have questions or concerns about this process, please let us know during your application. E-Verify Cennox participates in the E-Verify program to confirm the identity and employment eligibility of all new employees. For more information, please visit <a href="http://www.e-verify.gov" target="_blank">www.e-verify.gov</a>. &nbsp;
Powered by JazzHR
kDYVbM1vUS

Field Technician

<h3>Job Description</h3>
Job DescriptionDescription:
Field Technician II
 
We are End 2 End Technologies (E2E).
 
We are based in St. Paul, Minnesota with members of our team spread throughout the U.S. You may not have heard of us and we aren't a unicorn ... yet, but if you want to be part of the technology industry, we want to hear from you!
 
At E2E, you have the opportunity to put your unique skills to work. We are passionate about developing and delivering Industrial Internet of Things (IoT) solutions to modernize and automate industrial field networks.
Our approach to market is simple. Distinctively combine hardware, software and services, and deliver an End-to-End solutions to solve problems in oil and gas, utilities, water/wastewater, and transportation sectors.
If you're looking for a hands-on career opportunity that allows you to work face-to-face with the people directly impacted by your work, we want to talk to you!
 
About the Role You will join a growing company looking to continue our growth through the addition of a highly motivated individual with experience as a Field Technician II. The Field Technician position is responsible for the installation, troubleshooting, and maintenance of wireless communications equipment. This position configures and troubleshoots broadband and narrowband radios using basic wireless design principles. The Field Technician applies their working knowledge of networking to navigate software management platforms. This position is responsible for both setting up and testing 12-, 24- and 48-volt DC systems, as well as for providing excellent customer service while being on the front line of interacting with clients. Ideal candidates will be motivated, customer service focused, and looking to build a rewarding career within our company.
 
Responsibilities include: 
<ul>
<li>Installation of wireless network equipment, including broadband and narrowband radios, antennas, and cellular modems.</li>
<li>Configure and troubleshoot radio equipment, including access points, base stations, slave, subscriber radios, and PTP radios.</li>
<li>Understand fundamentals of wireless design tools as well as network monitoring tools such as Radio Admin, cnMaestro and IMS.</li>
<li>Installation of field networking and automation equipment, including routers, switches, media converters and POE injectors.</li>
<li>Knowledge of networking concepts, including IP subnetting, VLAN’;s, NAT, and Port translation.</li>
<li>Work with engineers over the phone to troubleshoot and configure routers and switches through CLI.</li>
<li>Termination and testing of ethernet and coax cabling, including CAT5e/6/6A, RG coax, LMR coax, heliax, and fiber.</li>
<li>Installing both rigid and EMT conduit.</li>
<li>Working with AC and DC power systems, installing breakers, fuses, batteries, power distribution systems, and UPSs.</li>
<li>Test, troubleshoot, and assemble 12-, 24-, and 48-volt DC battery arrays.</li>
<li>Install grounding and lightning protection units (LPUs)</li>
<li>Installation and mounting of equipment cabinets.</li>
<li>Design and build equipment panels.</li>
<li>Operating and working from manlift baskets, bucket trucks, and scissor lifts.</li>
<li>Pulling trailers as needed to transport equipment and materials to various job sites.</li>
<li>Function as a project lead.</li>
<li>Perform quality control inspections and site surveys.</li>
<li>Mentor new field technicians.</li>
<li>Complete documentation and other required forms in a timely and accurate manner.</li>
<li>Travel up to 75% of the time to various locations to perform job duties.</li>
<li>Ability to dig ditches to install underground equipment as needed.</li>
<li>Must be able to drive a vehicle, have a clean driving record, and have a valid driver’s license.</li>
<li>Support and adhere to the Corporate Health &amp; Safety Program.</li>
<li>May require availability outside of normal business hours on an on-call basis.</li>
</ul>
We take great care of clients and employees alike. Joining End 2 End Technologies means not only a fulfilling career with a bright, collaborative team, but enjoying the great benefits they offer also, such as a generous PTO policy, medical and dental insurance, 401(k) plan, the training you need to be an expert in your field, etc.
 
Full-time position open.
 
This position requires living in the Midland/Odessa, TX area.
 
~~The estimated wage listed does not reflect the actual wage. Wage will be dependent upon experience and qualifications. ~~
 
EEO Statement: End 2 End Technologies is an Equal Opportunity/Affirmative Action employer and all qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disability status, or any other characteristic protected by law.
Requirements:
 
<ul>
<li>Strong customer service skills.</li>
<li>High level of self-initiative and the ability to work independently to prioritize tasks, solve problems,</li>
<li>and make decisions.</li>
<li>Ability to develop and maintain positive relationships.</li>
<li>Troubleshooting and investigative skills.</li>
<li>Ability to grasp new techniques and continuously learn.</li>
<li>Strong problem-solving skills.</li>
<li>Ability to perform well under pressure.</li>
<li>Effectively manage and prioritize tasks and responsibilities for oneself and the team.</li>
</ul>

Field Technician II - Midland, TX

<h3>Job Description</h3>
Job Description
Field Service Technician Location: Charlotte, Winston-Salem, NC Travel: Up to 60%
Pay: Competitive Salary (to be determined based on experience)
Competitive compensation DOE (typically $34-37/hour; $80,000-100,000K annual with OT)
 
About the Field Service Technician role: ProSearch Recruiting Partners, an independent franchise of the MRI Network specializing in factory automation career recruitment and hires heavily in the machine tool industry, is seeking a highly motivated Field Service Technicians to join a well-established machine tool companies with over 60 years of experience.
As a Field Service Technician, you will play a crucial role in ensuring the smooth operation of our customers' machinery, specifically focusing on CNC lathes, robotic systems, and custom engineered solutions. You will be responsible for installing, troubleshooting, repairing, and maintaining these specialized systems. This is a direct hire opportunity with strong career potential!
 
Key Responsibilities of a Field Service Technician:
<ul>
<li>Travel to customer sites in the southeast to provide on-site service for CNC lathes, robotic systems, and custom engineered solutions.</li>
<li>Install, troubleshoot, repair, and maintain CNC lathes, robotic systems, and custom engineered solutions.</li>
<li>Train customers and internal team members on proper equipment usage and maintenance, with a focus on CNC lathes, robotic systems, and custom engineered solutions.</li>
<li>Collaborate with internal departments and external vendors to resolve service issues related to CNC lathes, robotic systems, and custom engineered solutions.</li>
<li>Conduct high-quality, efficient, and timely repairs, preventive maintenance inspections, and machine/tooling installations on CNC lathes, robotic systems, and custom engineered solutions.</li>
<li>Recommend modifications and improvements to equipment, processes, and procedures related to CNC lathes, robotic systems, and custom engineered solutions.</li>
<li>Continuously review and improve current processes related to CNC lathes, robotic systems, and custom engineered solutions.</li>
<li>Accurately document service activities and generate reports.</li>
<li>Adhere to all safety policies and procedures.</li>
<li>Drive company vehicles to service calls.</li>
<li>Perform other duties as assigned.</li>
</ul>
A Qualified Field Service Technician will:
<ul>
<li>Ability and willingness to learn new technologies, specifically within the areas of CNC lathes, robotic systems, and custom engineered solutions.</li>
<li>Strong background in CNC machine tool service field work, with demonstrable experience in CNC lathes, robotic systems, and custom engineered solutions.</li>
<li>Passion for customer satisfaction and excellent communication skills.</li>
<li>Preferred formal education/training in troubleshooting, repair, and installation of CNC machine tools, with a focus on CNC lathes, robotic systems, and custom engineered solutions.</li>
<li>Strong mechanical and electrical aptitude.</li>
<li>Ability to handle a physical workload.</li>
</ul>
Physical Demands
<ul>
<li>Ability to stand for periods up to 4 hours without breaks</li>
<li>Ability to move/climb around machines</li>
<li>Must be able to lift up to 50 pounds</li>
<li>Required to use hands to finger, handle or feel.</li>
<li>Reaching with hands and arms</li>
<li>Must be able to talk and hear to accomplish job</li>
<li>Industry setting with moderate noise</li>
</ul>
 
Field Service Technician will be rewarded with:
Competitive compensation DOE (typically $34-37/hour; $80,000-100,000K annual with OT)
Comprehensive Benefits
Medical
Dental
Vision
Vacation time
Paid expenses
401 K
Opportunity for career growth!
 
Must be authorized to work in the United States without sponsorship
This Company uses E-Verify to confirm identity and employment eligibility
<ul>
<li>Seniority Level</li>
<li>Associate</li>
<li>Industry</li>
<li>Automation Machinery ManufacturingMetalworking Machinery ManufacturingIndustrial Machinery Manufacturing</li>
<li>Employment Type</li>
<li>Full-time</li>
<li>Job Functions</li>
<li>EngineeringManufacturingProduction</li>
<li>Skills</li>
<li> </li>
<li>Field Service ManagementRoboticsTroubleshootingMaintenance and RepairCustomer SatisfactionPreventive MaintenanceMaintenance InspectionsCommunicationComputer Numerical Control&nbsp;</li>
</ul>

Field Service Technician

<h3>Job Description</h3>
Job Description
Validation &amp; Engineering Group, Inc. (V&amp;EG) is a leading services supplier who provides solutions for the Pharmaceutical, Biotechnology, Chemical, Food, and Medical Devices industries in the following areas: Laboratory, Compliance, Computer, Engineering, Project Management, Validation, and other services.
We are seeking a talented, dedicated individual committed to work under the highest ethics standards for the following position:
<ul>
<li>Sr Engineer</li>
<li>1st shift, but it will be required to work 2nd or 3rd shift during the CIP Cycle development activities. December shutdown support will be required as well.</li>
</ul>
PREFERRED:
<ul>
<li>Experience in Pharmaceutical or biotechnology industry equipment Commissioning and qualification, installation qualifications.</li>
<li>Experience in CIP and SIP cycle development.</li>
<li>Experience developing project plans and strategies.</li>
<li>Organized, multitasking and ability to work on high pace environment.</li>
<li>MAXIMO</li>
</ul>
SUMMARY Independently provides and/or directs the characterization of process optimization strategies and/or troubleshooting of operational issues in the operations, manufacturing, pilot plant or capital projects environment. Applies advanced and diverse engineering principles to the design and implementation of major system modifications, experiments, process and/or capital projects. Develops, organizes, analyzes and presents interpretation of results for operational issues or engineering projects of significant scope and complexity. FUNCTIONS General: 1. Complete complex or novel assignments requiring development of new and/or improved engineering techniques and procedures. 2. Develop engineering policies and procedures that affect multiple organizational units. 3. Supervise, coordinate and review work of a small staff of engineers, associates and/or technicians on an ongoing basis as well as on a project basis. 4. Employ advanced engineering techniques and/or modifications of advanced techniques within area of engineering expertise. 5. Apply knowledge of engineering principles and practices outside of area of discipline expertise to broad variety of assignments in related fields. 6. Serves as a peer-recognized engineering technology specialist in at least one area, with overall responsibility for determining methodologies in that area. 7. Application of mature engineering knowledge in planning and conducting projects. *Other functions may be assigned Design Engineering: 1. Develop technical solutions to complex problems requiring the regular use of ingenuity and creativity. 2. Work with research, manufacturing, process development, utilities, facilities, quality assurance and validation departments in developing requirements and recommendations for large and/or highly complex system/facility modifications. 3. Work with project managers to complete design and engineering projects within schedule, budget and quality constraints. 4. Coordinate the work of consultants, architects and engineering firms on development of standard design documents. 5. Develop departmental budgets or project budgets encompassing multiple disciplines for area within project or entirety of smaller project EDUCATION
<ul>
<li>Masters + 2 years of Engineering experience OR</li>
<li>Bachelors in Engineering + 4 years of Engineering experience.</li>
</ul>
 COMPETENCIES/SKILLS 1. Working knowledge of pharmaceutical/biotech processes 2. Familiarity with validation processes 3. Familiarity with documentation in a highly regulated environment 4. Ability to operate specialized laboratory equipment and computers as appropriate. 5. Ability to interpret and apply GLPs and GMPs. 6. Ability to apply engineering science to production. 7. Able to develop solutions to routine technical problems of limited scope Demonstrated skills in the following areas: -Problem solving and applied engineering. -Basic technical report writing -Verbal communication -Comprehensive understanding of validation protocol execution requirements.

MV01-081225 Sr Engineer

<h3>Job Description</h3>
Job DescriptionDescriptionThe focus of this position is to make IT Easy for Mytech clients by supporting their network infrastructures and the end users by going onsite for work that cannot be performed remotely.&nbsp; This position will be part of our Service Team and will work together to execute the primary duties and responsibilities of the department. There will be certain tasks that require time spent outside of standard business hours, such as an on-call rotation.&nbsp; Key Responsibilities
<ul>
<li>Provide great customer service and communicate clearly with non-technical and technical users and staff.</li>
<li>Follow support process and guidelines as designed.</li>
<li>Provide onsite support for user problems relating to hardware, software applications, and network issues within a tier II perspective.</li>
<li>Log, diagnose, repair, and relay reported problems to the end user, client, or department.</li>
<li>Diagnose and communicate advanced issues to Tier 2 staff.</li>
<li>Acquire new technical skills.</li>
</ul>
 Skills, Knowledge and Expertise
<ul>
<li>Valid Driver's License&nbsp;</li>
<li>Technical Certification requirements; CCENT or CompTIA Net+</li>
<li>Minimum 2-years industry experience, specifically supporting Microsoft-based environments.</li>
<li>Strong technical knowledge and understanding of small to medium sized business networks, infrastructure, and equipment</li>
<li>Ability to concisely document processes, issues, resolutions; strong writing skills</li>
<li>Ability to multi-task, prioritize and respond with a sense of urgency.</li>
<li>Strong problem solving and critical thinking abilities</li>
<li>Ability to successfully and effectively work independently and within a team structure</li>
<li>Self-motivated and responsive to management and clients</li>
<li>Experience working with ticketing software desired</li>
<li>Demonstrated knowledge of standard help desk service call methods and procedures</li>
<li>Exceptional ability to develop productive and positive customer relationships</li>
</ul>
 BenefitsMytech offers a comprehensive benefits package which includes:&nbsp;
<ul>
<li>12 days of accrued vacation in your first year&nbsp;</li>
<li>6 days Sick time&nbsp;</li>
<li>8 hours of volunteer time&nbsp;</li>
<li>Medical, Dental, and Vision insurance (employee portion fully paid)</li>
<li>Company paid Life, STD, and LTD&nbsp;</li>
<li>Professional Development Plan&nbsp;</li>
<li>401k with company match&nbsp;</li>
<li>Profit Sharing&nbsp;</li>
</ul>

Field Technician II

<h3>Job Description</h3>
Job Description
Provide advanced and/or cross-technology engineering through all phases of the Technology / Project Life Cycle. The Technology Engineer is responsible for the overall systems infrastructure including engineering, implementation and integration, and technical services and support. The Technology Engineer designs, implements/installs, maintains and administers infrastructure systems including hardware, software and various configurations. Monitors overall performance to proactively identify potential issues and tune appropriately. Performs root cause analysis on failed components and implements corrective measures. The Technology Engineer mentors and coaches others to establish and improve processes and procedures. Experience in support and/or engineering for the specific technical discipline: security, database, network, collaboration, desktop, storage, backup / recovery, mainframe platforms, UNIX platforms, AS/400 platforms, Windows platforms, web engineering, Citrix, directory services, and integration (EAI, batch and real time solutions) Excellent communication and presentation skills to effectively communicate information to customers and to all levels within the organization. Proven ability to understand company business problems and identify probable technical solutions to those problems Key Responsibilities Ensure adherence to architecture standards and roadmaps. Implement overall infrastructure / middleware components per project with infrastructure teams, ensuring that overall solution is designed to meet SLA (performance and up-time), DR, and scalability needs required by the solution. Ensure adherence to architecture standards and roadmaps. Design and successfully implement overall infrastructure / middleware components per project with infrastructure teams, ensuring that overall solution is designed to meet SLA (performance and up-time), DR, and scalability needs required by the solution. Ensure that post-production operational processes / deliverables are well designed and implemented prior to the project moving into the solution support phase. Define and create operational procedures, processes, and scripts. Follow appropriate change/release management practices. Support and maintain infrastructure solutions utilizing required tools and technologies. Provide off-hours support (24 x 7) as required. Note to Vendors have to be in Cincinnati or near a hub 5 prescreening questions, a game Interview process will be manager first, then team interview This contractor must have some level of ownership of spend, substantial ($500K+) Will be talking to lines of business- must being able to collaborate with others Cost optimizing experience Needing someone who has been in the hot seat before- has \'spend\' attached to their name Use AI/ML models to predict future cloud expenses based on historical retail sales trends. Implement cloud cost monitoring tools like AWS Cost Explorer, Azure Cost Management, and GCP Billing to track expenses across departments Ensures that cloud spending is optimized while maintaining performance, security, and scalability. What they are lacking the most- someone with architectural skills that can assist with realizing the cost of automation and find more opportunities Retail experience would be beneficial Cloud Cost Optimization Identifying cost-saving opportunities, such as right-sizing resources, leveraging discounts (e.g., reserved instances, spot instances), and optimizing storage solutions. Monitoring &amp; Reporting Implementing real-time cost tracking, analytics, and reporting tools to provide visibility into cloud expenses. Automation &amp; Governance Developing scripts, policies, and frameworks to enforce cost control measures and improve operational efficiency. Collaboration Working closely with finance, engineering, and operations teams to align cloud spending with business objectives. Budgeting &amp; Forecasting Implementing financial planning strategies to predict cloud expenses and prevent overspending. Skills Required Cloud Computing (Azure, GCP) Scripting &amp; Automation (Terraform) Cost Management Tools (AWS Cost Explorer, Azure Cost Management, GCP Billing)

1,046 Engineering Jobs in Elgin, Elgin Township, MN 55932, USA