field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

city

state

<h3>Job Description</h3>
Job DescriptionBenefits: 
<ul>
<li>401(k)</li>
<li>401(k) matching</li>
<li>Dental insurance</li>
<li>Health insurance</li>
<li>Paid time off</li>
<li>Vision insurance</li>
</ul>
 About AID AID is a growing yet established consulting firm located in central New Jersey, offering professional services in non-destructive testing and evaluation (NDT/NDE) of highway infrastructure (bridges and pavements), pavement evaluation and design, geotechnical design and subsurface investigation, subsurface and utility mapping, and forensic studies. AID owns and operates an array of NDT equipment, including a Laser Crack Measurement System (LCMS), Falling Weight Deflectometer (FWD), various air-launched and ground- coupled Ground Penetrating Radar (GPR) antennas, and many others such as a high-speed profiler and walking profilers. In addition, AID runs its own soils, asphalt, and concrete materials testing laboratory. Job Description This full time Field Engineering Assistant position will primarily involve geophysical/electronic location and designation of subsurface utilities using surface geophysical equipment, including RF Pipe and Cable Locators, Ground Penetrating Radar, electromagnetic induction devices, record research, and documenting the work through the preparation of sketches, spreadsheets, and written reports. The ability to work minimal supervision is required. The ideal candidate should be prepared to work in the field, performing both utility mark out (locating, subsurface utility evaluation) and geophysical surveying activities. This position also entails office work, including, but not limited to, assisting with proposal and invoice preparation, using geophysical equipment software to interpret field data, and providing written reports with findings as well as presenting findings on CAD maps/plans. The candidate will perform this work mostly under the supervision of a senior engineer. The potential candidate must be open to work during day/night shifts and occasionally on the weekends. He/she will also be expected to assist in other areas of work, as needs dictate. Working in other NDT areas might be expected. This position will involve increasing responsibility, based on his/her performance and the needs of the company. Salary: $60,000/yr - $78,000/yr, depending on experience and credentials. Qualifications Minimum Qualifications 
<ul>
<li>Associate degrees in engineering, geotechnical or physics fields.</li>
<li>Proficiency of AutoCAD and basic knowledge of Civil 3D.</li>
<li>Proficiency in computer and MS office</li>
<li>Excellent communication skills, both written and verbal, with the ability to present complex information clearly and effectively.</li>
<li>Strong organizational skills and the ability to manage multiple tasks and deadlines.</li>
<li>Able to carry 50 Ib of equipment.</li>
</ul>
 Preference Qualifications 
<ul>
<li>Bachelors degrees in geotechnical or physics fields. Bachelors degree in civil engineering is a plus.</li>
<li>2 years of experience in Civil Engineering fields</li>
<li>Any experience in NDT and SUE fields is a plus</li>
<li>Familiarity with CI/ASCE 38-22 standards and technical utility investigation is a plus.</li>
<li>Familiarity in geophysical testing and analysis methods, including EMI and GPR is a plus.</li>
</ul>
To apply, send your resume to the following email with the subject: Engineering Assistant: <a href="mailto:jobs@aidpe.com" target="_blank">jobs@aidpe.com</a> Job Site: This is a full time in person job. Prospective candidates should be able to commute or relocate to the Township of Hamilton, NJ, 08691.

Engineering Assistant

<h3>Job Description</h3>
Job DescriptionSalary: 
About FusionICS, LLC
At Fusion,we specialize in mission-critical engineering, infrastructure, and IT solutions for federal and defense organizations. As a Service-Disabled Veteran-Owned Small Business (SDVOSB), we bring a commitment to excellence, security, and innovation to every project.
Our team of elite engineers and technical experts is dedicated topowering the future of secure facilities by providing cutting-edge engineering solutions. When you join Fusion, you become part of a company that valuestechnical expertise, collaboration, and a commitment to national security.
We look forward towelcoming you to our team and working together to support mission-critical operations across government and defense installations.
Position Summary:
Fusion is seeking a highly skilledEngineering Technician to provide technical oversight of construction contracts, quality control, and infrastructure compliance. The Engineering Technician will support public works operations, infrastructure assessments, cost estimation, and project management to ensure adherence to safety regulations, contractual requirements, and engineering standards. This role requires field inspections, contractor evaluations, and collaboration with government personnel to support mission-critical projects. The ideal candidate will haveexperience working in federal government environments, and the ability to operate within a Top Secret security framework.
Key Responsibilities:
Construction Oversight &amp; Quality Assurance
<ul>
<li>Review and enforce construction contract provisions, including quality control and safety requirements.</li>
<li>Conduct site inspections to evaluate conditions, recommend improvements, and oversee contractor execution.</li>
<li>Ensure projects comply with federal, DoD, and engineering standards for safety and performance.</li>
<li>Provide technical evaluations of contractor proposals, invoices, and modifications.</li>
<li>Manage the three-phase control quality management process to verify compliance at all project stages.</li>
</ul>
Project Management &amp; Cost Estimation
<ul>
<li>Assist in project budgeting, cost estimation, and contract modifications.</li>
<li>Monitor project schedules, milestones, and deliverables to ensure timely completion.</li>
<li>Provide technical guidance on infrastructure repairs, upgrades, and modernization efforts.</li>
<li>Support risk assessments and contingency planning for facility infrastructure projects.</li>
</ul>
Collaboration &amp; Compliance
<ul>
<li>Work closely with engineers, contractors, and government officials to ensure project alignment with mission objectives.</li>
<li>Ensure construction activities adhere to environmental, safety, and federal regulations.</li>
<li>Develop and maintain technical reports, engineering documentation, and compliance records.</li>
<li>Participate in meetings, site briefings, and contract performance reviews to provide technical insight.</li>
</ul>
Qualifications &amp; Requirements:
Education &amp; Experience:
<ul>
<li>Bachelors degree (B.S.) in Engineering, Construction Management, or a related field (preferred).</li>
<li>3+ years of experience in engineering, construction quality control, or infrastructure management.</li>
<li>Experience with DoD construction projects, military facilities, or government contracting preferred.</li>
</ul>
Certifications &amp; Technical Skills:
<ul>
<li>Active Construction Quality Management for Contractors (CQM-C) certification.</li>
<li>Strong knowledge of civil, mechanical, and electrical construction principles.</li>
<li>Familiarity with federal construction regulations, NEC, OSHA, and safety compliance standards.</li>
<li>Proficiency in Microsoft Office, AutoCAD, and project management software.</li>
</ul>
Security Clearance Requirement:
<ul>
<li>Active Top Secret (TS) clearance required.</li>
<li>Must be able to obtain and maintain clearance at the necessary level for assigned duties.</li>
</ul>
Salary &amp; Benefits:
Compensation:
<ul>
<li>Base Salary: Competitive, based on experience and security clearance level.</li>
<li>Annual Review: Compensation is reviewed annually as part of FusionICS' performance and salary review process.</li>
</ul>
Benefits Package:
<ul>
<li>Medical &amp; Retirement Plans: Eligible to participate in medical insurance and 401(k) retirement plans with a 4% company match.</li>
<li>Paid Time Off: Employees accrue 120 hours (15 days) of vacation per year.</li>
<li>Sick Leave: Employees receive 5 days of sick leave per year.</li>
<li>Federal Holidays: FusionICS provides 11 paid holidays per year.</li>
</ul>
Work Conditions &amp; Physical Requirements:
<ul>
<li>Ability to work in high-security environments requiring strict access controls and security protocols.</li>
<li>Work in indoor and outdoor environments, including near high-voltage switchgear and substations.</li>
<li>Requires lifting/carrying up to 50 lbs, climbing ladders, and working in confined spaces.</li>
<li>Occasional travel to other sites or campuses as needed.</li>
</ul>

Engineering Technician (TS Clearance)

<h3>Job Description</h3>
Job Description
Summary of Position:
The Support Engineer or Engineering Tech will support the Engineering and Operations teams by analyzing operations data to create engineering tools and an organized reporting structure for high-priority information. You will collaborate with other engineers and analysts to analyze data, troubleshoot issues, support projects, and provide recommendations for solutions. This position reports to the General Manager of the Northern Delaware Basin.
Primary Duties &amp; Responsibilities:
The following represents most of the duties performed by the position but is not meant to be all-inclusive nor prevent other duties from being assigned when necessary. Employees are expected to comply with all regulatory, environmental, and safety rules and standards, as well as corporate policies.
As a Support Engineer or Engineering Tech, you will be responsible for:
<ul>
<li>Designing and constructing high-impact corporate engineering tools.</li>
<li>Developing and supporting the implementation of new processes.</li>
<li>Executing design plans, timelines, volume forecasts, system hydraulics, and project economics for pipeline and reuse projects, as well as overseeing engineering of evaporation trials.</li>
<li>Preparing capital expenditure estimates, schedule estimates, and economic justifications for projects, documenting results, and providing to production facilities and pipeline execution.</li>
<li>Coordinating with procurement and field leadership in the creation and tracking of bid packages, material ordering, and creation, maintenance, and evolution of reports, project scheduling, data management, and process improvements.</li>
<li>Exemplifying logistics standards and procedures, utilizing personal and departmental knowledge and resources as needed.</li>
<li>Creating BOM/Material acquisition and assisting in the quoting process.</li>
<li>Creating Drawings &amp; P&amp;IDs.</li>
<li>Working closely with engineering, construction, and operations teams to ensure the accurate installation of equipment, data collection, and project management.</li>
<li>Preparing and submitting monthly system balances and allocations to internal departments.</li>
<li>Establishing working relationships with engineering, field, and other internal/external customers to better meet business needs.</li>
<li>Researching projects and making evaluations, knowing what information to collect, where to find it, and how to interpret it to resolve issues.</li>
</ul>
Qualifications &amp; Requirements:
<ul>
<li>Must be able to travel frequently to field locations when necessary.</li>
<li>Working knowledge of applicable industry codes and standards, as well as environmental and safety regulations, is a plus.</li>
<li>Advanced project management and analytical skills, advanced Excel and PowerPoint skills required.</li>
<li>Other knowledge to include production, gas compression, pump operations, chemical treating, fluid processing, and overall saltwater disposal processes is highly preferred.</li>
<li>Must have strong interpersonal skills with the ability to build and maintain effective relationships, and communicate with various agencies, customers, and all levels of company staff and management.</li>
<li>Have strong analytical, oral, and written communication skills.</li>
<li>Must have strong time management and organizational skills, with the ability to multitask with attention to accuracy.</li>
<li>Must be a team player who possesses the ability to adapt to a changing and fast-paced work environment.</li>
<li>Be able to coordinate and communicate logic, enhancements, and requirements to in-house developers.</li>
</ul>
Support Engineer
<ul>
<li>A bachelor’s degree in engineering (Petroleum, Mechanical, Civil, or Chemical Engineering) is required.</li>
</ul>
<ul>
<li>Must have 3-5 years of Oil and Gas industry experience, with 1-2 years of relevant engineering experience focused within the E&amp;P or Midstream O&amp;G industry.</li>
<li>In-depth knowledge and understanding of the design and construction of gathering pipeline systems, as well as operations and construction of saltwater disposal facilities.</li>
</ul>
Engineering Technician
<ul>
<li>Must have 5-8 years of Oil and Gas industry experience, with 1-2 years of relevant engineering experience focused within the E&amp;P or Midstream O&amp;G industry.</li>
<li>Must have experience with business intelligence tools (Spotfire, MS BI) and Hydraulic Modeling (Pipesim, Synergi, or others).</li>
<li>Experience with SQL, Python, R, and other programming/statistical languages is required.</li>
</ul>
Working Conditions/Environment:
<ul>
<li>Operates in a field and office environment, depending on schedule and projects.
<ul>
<li>Due to the diversity of scheduled and non-scheduled remediation, environmental conditions vary significantly depending on the project.</li>
</ul>
</li>
<li>Office environment:
<ul>
<li>Professional and/or business casual.</li>
</ul>
</li>
<li>Field environment:
<ul>
<li>May be subject to extreme environments such as heat, cold, etc.</li>
<li>The physical demands described here represent those that an employee must meet to perform the functions of this job successfully. While performing the duties of this job, the employee is occasionally required to:
<ul>
<li>Standing, walking, or sitting for prolonged periods.</li>
<li>Walking on uneven and vegetated terrain; sampling activities such as hand auguring for soil sample collection.</li>
<li>Use hands to handle or feel objects, tools, or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch, or crawl; talk or hear.</li>
<li>The employee must occasionally lift and/or move objects up to 50 pounds and must be able to carry a self-contained breathing apparatus if needed. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.</li>
</ul>
</li>
</ul>
</li>
</ul>
Position Type:
<ul>
<li>This is a full-time position.
<ul>
<li>9 hours Monday – Thursday, 4 hours Friday</li>
</ul>
</li>
<li>Frequent travel to field locations (~ 5%)</li>
</ul>
Position Location:
<ul>
<li>Midland, TX</li>
</ul>
Benefits:
At WaterBridge, our employee benefits include, but are not limited to, the following:
<ul>
<li>Medical, Dental, Vision, &amp; Prescription Drug Coverage</li>
<li>Voluntary Life Insurance for Employee, Spouse, &amp; Child(ren)</li>
<li>Employee Basic Life and AD&amp;D Insurance – Company Paid</li>
<li>Short Term &amp; Long Term Disability – Company Paid</li>
<li>401(k) or Roth 401(k) Retirement Plan, plus a company match</li>
<li>Flexible Paid Time Off</li>
<li>And many other benefits not listed here</li>
</ul>
About Us
The WaterBridge group of companies is a fast-paced and growing organization. Our business lines include produced water handling and recycling, land management and environmental solutions. Our employees provide essential services to unlock sustainable American energy production every day, and we are continually seeking dedicated individuals who thrive on both creativity and challenge to be a part of our team. We pride ourselves for our strong commitment to our employees and for creating a workplace where employees feel genuinely valued and connected. Join our entrepreneurial and innovative team today!
WHO WE ARE
At WaterBridge, we believe that our people make the difference! We are committed to provide our employees with personal development and growth opportunities. We've been leading the emergence and evolution of the midstream water sector since 2015, backed by our strong core values and operational excellence. WaterBridge owns and operates permanent, integrated water infrastructure networks to address the long term produces water management requirements of E&amp;P companies.
Our Mission: 
To make WaterBridge the standard bearer for the water midstream industry.
Core Values:
SAFETY
<ul>
<li>Safety is important. We demand a personal commitment at all levels within the organization. Everyone has the right and responsibility to speak up and stop any unsafe work being performed.</li>
</ul>
TEAMWORK + COLLABORATION
<ul>
<li>We work with humility and courage to be a team player. We define success by contribution and not competition. We consider the impact we have on others before we act.</li>
</ul>
INTEGRITY + TRUST
<ul>
<li>We honor our commitments. We demonstrate a propensity to trust and act in the very best interest of all. We do not tolerate dishonesty or intimidation.</li>
</ul>
AUTHENTIC COMMUNICATION
<ul>
<li>We are honest and respectful. We genuinely listen to each other and encourage healthy debate. We do not spin the truth, have hidden agendas, or hide information.</li>
</ul>
ACCOUNTABILITY FOR RESULTS
<ul>
<li>We hold ourselves accountable and take responsibility for results, regardless of outcome. We learn from our mistakes, encourage feedback, and increase our capabilities. We do not overpromise or underdeliver.</li>
</ul>
ENTREPRENEURIAL INNOVATION
<ul>
<li>Everyone is a leader: we “think big” in everything we do and encourage new ideas. We strive for continuous improvement and encourage responsible risk taking. We do not play it safe due to complacency.</li>
</ul>
WaterBridge is an Equal Opportunity Employer.

Support Engineer / Engineering Technician

<h3>Job Description</h3>
Job DescriptionBenefits: 
<ul>
<li>401(k)</li>
<li>401(k) matching</li>
<li>Dental insurance</li>
<li>Health insurance</li>
<li>Paid time off</li>
<li>Vision insurance</li>
</ul>
 About Advanced Infrastructure Design (AID), Inc. AID is a growing yet established consulting firm located in central New Jersey, offering professional services in non-destructive testing and evaluation (NDT/NDE) of highway infrastructure (bridges and pavements), pavement evaluation and design, geotechnical design and subsurface investigation, subsurface and utility mapping, and forensic studies. AID owns and operates an array of NDT equipment, including a Laser Crack Measurement System (LCMS), Falling Weight Deflectometer (FWD), various air-launched and ground- coupled Ground Penetrating Radar (GPR) antennas, and many others such as a high-speed profiler and walking profilers. In addition, AID runs its own soils, asphalt, and concrete materials testing laboratory. Job Description This full time Field Engineering Assistant position will primarily involve geophysical/electronic location and designation of subsurface utilities using surface geophysical equipment, including RF Pipe and Cable Locators, Ground Penetrating Radar, electromagnetic induction devices, record research, and documenting the work through the preparation of sketches, spreadsheets, and written reports. The ability to work minimal supervision is required. The ideal candidate should be prepared to work in the field, performing both utility mark out (locating, subsurface utility engineering) and geophysical surveying activities. This position also entails office work, including, but not limited to, assisting with proposal and invoice preparation, using geophysical equipment software to interpret field data, and providing written reports with findings as well as presenting findings on CAD maps/plans. The candidate will perform this work mostly under the supervision of a senior engineer. The potential candidate must be open to work during day/night shifts and occasionally on the weekends. He/she will also be expected to assist in other areas of work, as needs dictate. Working in other NDT areas might be expected. This position will involve increasing responsibility, based on his/her performance and the needs of the company. Salary: $60,000/yr - $78,000/yr, depending on experience and credentials. Qualifications Minimum Qualifications 
<ul>
<li>Associate degrees in civil engineering, geotechnical or physics fields.</li>
<li>Proficiency of AutoCAD and basic knowledge of Civil 3D.</li>
<li>Proficiency in computer and MS office</li>
<li>Excellent communication skills, both written and verbal, with the ability to present complex information clearly and effectively.</li>
<li>Strong organizational skills and the ability to manage multiple tasks and deadlines.</li>
<li>Able to carry 50 Ib of equipment.</li>
</ul>
 Preference Qualifications 
<ul>
<li>Bachelors degrees in geotechnical or physics fields. Bachelors degree in civil engineering is a plus.</li>
<li>2 years of experience in Civil Engineering fields</li>
<li>Any experience in NDT and SUE fields is a plus</li>
<li>Familiarity with CI/ASCE 38-22 standards and technical utility investigation is a plus.</li>
<li>Familiarity in geophysical testing and analysis methods, including EMI and GPR is a plus.</li>
</ul>
 Job Site: This is a full time in person job. Prospective candidates should be able to commute or relocate to the Township of Hamilton, NJ, 08691 To apply, send your resume to the following email with the subject: SUE Engineering Assistant<a href="mailto:jobs@aidpe.com" target="_blank">jobs@aidpe.com</a>

Subsurface Utility Engineering (SUE) Assistant

<h3>Job Description</h3>
Job DescriptionJob Title: Engineering Technician (E-Tech)Locations: Various Job Type: Full-Time Overview:We are seeking an experienced Engineering Technician (E-Tech) with hands-on experience in building batteries and power electronic converters. The ideal candidate will be responsible for assembling, testing, and troubleshooting complex systems with a focus on power electronics and energy storage solutions. This role is crucial to ensuring the efficiency and effectiveness of our products in meeting industry standards. Key Responsibilities:Assemble and test battery systems and power electronic converters.Perform troubleshooting and repairs on electronic components, ensuring the performance and quality of products.Collaborate with engineers to improve and refine designs and assembly processes.Conduct tests and inspections to identify performance issues in electrical and electronic systems.Maintain detailed documentation of procedures, modifications, and test results.Provide support in the design and development of new products, focusing on energy storage and power conversion systems.Ensure compliance with safety standards and protocols. Qualifications:3+ years of experience in building batteries and power electronic converters.Strong hands-on technical skills with a focus on power electronics.Experience in troubleshooting and repairing electronic components.Ability to read and interpret schematics, blueprints, and technical drawings.Familiarity with industry standards for battery systems and power electronics.Excellent problem-solving skills and attention to detail.Good communication and teamwork abilities. Preferred Skills:Knowledge of advanced battery technologies and power conversion methods.Experience in working with high-voltage systems and energy storage solutions.Familiarity with safety regulations in the electronics industry. Education:Associate's degree or technical diploma in Electrical Engineering, Electronics Technology, or a related field. Benefits:Competitive salary and benefits package.Opportunities for professional growth and development.Collaborative and innovative work environment.

Engineering Technician

<h3>Job Description</h3>
Job DescriptionDescription:
The ETCS will perform independent support services to satisfy the operational objectives of the NAVFAC Officer in Charge of Construction (OICC), Facilities Engineering and Acquisition Division (FEAD) Director, or the Resident Officers in Charge of Construction (ROICC). Services rendered by the ETCS shall include all labor, material, and equipment necessary to complete the work described in the paragraphs below. The ETCS services shall be made available on site and for a full-time basis. 
 
The ETCS will be assigned to support individual construction projects. Projects assigned will vary in type, complexity, and magnitude including structures and related work such as office and shop buildings, airfield expansions, utility installation, wharf repairs, industrial facilities, etc. Projects may be in the $5M to $400M+ range. 
<ul>
<li>Furnish their designated Government representatives with documentation indicating whether the construction conforms to the contract requirements. </li>
<li>Act as the primary person responsible for monitoring construction contractor’s efforts with regards to on-site quality assurance and safety compliance. </li>
<li>Coordinate construction operations between contractors, station personnel, and other government agencies. </li>
<li>Provide technical oversight of multiple construction contracts </li>
<li>Assess the adequacy of the construction contractor’s quality control program. </li>
<li>Participate in all “Preconstruction Meetings”, “Post-Award Kickoff Meetings”, and "Partnering" activities during construction (workshops, meetings, etc.) as required. Attend quality control, preparatory and initial meetings and monitor three-phases of control checklists for accuracy and thoroughness. </li>
<li>Follow NAVFAC Business Process Management System (BPMS), , Kilo-Grams and associated Naval Engineering Training and Operating Procedures Standards (NETOPS) in the execution of required tasks. </li>
<li>Act in direct support the construction manager/construction oversight engineer as required if such duties are not specifically outlined herein. </li>
<li>Review/Analyze Requests for Information (RFIs) and submittals and provide the Government with comments and recommendations. </li>
<li>Maintain working files utilizing the electronic Construction Management System (eCMS), Share Point, or other approve project specific Construction Management system authorized for the project. </li>
<li>Monitor compliance with environmental protection requirements and document all findings in QA log </li>
<li>Report and document instances of non-compliance with quality control and safety requirements. </li>
<li>Monitor and document construction surveying, materials and system testing conducted by the construction contractor. </li>
<li>Provide review/analysis and notes/comments/recommendations on Contractor’s Requests for Payment, including Complete, the monthly field pay estimate worksheet for each construction contract with the construction contractor’s representative. Inspect material stored off-site, where applicable. </li>
<li>Coordinate with Government representatives and appropriate construction contractor personnel before conducting required inspections and meetings such as the NAVFAC Red Zone meeting (coordination meeting typically held at 75% project completion). </li>
<li>Review interim and final DD 1354 documentation and provide the Government with comments and recommendations. </li>
<li>Assist in Constructability reviews as requested. Provide written review comments and recommendations. </li>
<li>Monitor the preparation of as-built activities of contractors to ensure that those documents are being prepared on an on-going basis. Review contractor submissions of as-built drawings for completeness and </li>
<li>accuracy and advise the appropriate Government personnel in writing as to the acceptability of such submissions. • Participate in final acceptance and testing of major building systems including but not limited to fire protection certification, elevator certifications, ensuring contractor compliance in the areas of Testing and Balancing (TABs), Duct Air Leakage Testing (DALTS), Digital Control Systems (DDC) for HVAC systems. Provide notes/comments/recommendations for acceptance or rejection of the witnessed system based on contract document conformance. </li>
<li>Review contractor correspondence and recommend an appropriate response. </li>
</ul>
Requirements:
The ETCS individual shall meet or exceed the following qualifications (the Government reserves the right to reject any service provider that does not meet the standards described in the PWS): 
 
<ul>
<li>Five (5) years of recent experience within the last ten (10) years as a construction inspector or tradesperson and shall have a basic understating of engineering, architecture or construction trades. </li>
<li>Current certification in concrete inspection, structural steel inspection, plumbing inspection, electrical inspection, HVAC inspection and / or other trade related inspection certifications are desirable but not required. </li>
<li>Current certification of successful completion of the US Army Corps of Engineers (USACE)/Naval Facilities Engineering Systems Command (NAVFAC) Construction Quality Management for Contractors course. This course may be completed within 45 calendar days of task order award. The certificate is valid for 5 years. If the individual’s certificate expires during the period of performance of a Task Order, the individual must retake the course to remain current. </li>
<li>Knowledge of the three-phases of control and Construction Quality Management process is required. </li>
<li>Sound understanding of construction concepts, principles and practices applicable to multi-disciplined engineering projects and the design, layout, and supervision of construction operation. </li>
<li>Thorough knowledge of construction practices and methods and construction management skills. </li>
<li>Provide satisfactory proof of U.S. citizenship. (U.S. or naturalized). Task orders may allow waiver of this requirement should projects allow in certain regions. </li>
<li>The Contractor shall obtain all required corporate and personnel Security Clearances prior to commencement of work. The Contractor shall ensure that a list of all personnel with Security Clearances is </li>
<li>maintained and current, including clearances that are pending. Each task order shall establish necessary base/building access requirements. </li>
<li>Have demonstrated ability and experience to inspect materials, workmanship and construction and installation of various systems. Possess up-to-date knowledge of construction practices and techniques, e.g., proper applications of construction materials and methods of installation. </li>
<li>Have demonstrated knowledge of the latest U.S. Army Corps of Engineers’ safety publications (including but not limited to EM385-1-1, OSHA safety requirements) as well as all other applicable national health and safety regulations, codes and standards. </li>
<li>Have demonstrated knowledge of Federal building projects design codes (UFGS) and Construction techniques. </li>
<li>Have demonstrated experience in the use and application of Microsoft Office (Word, Excel, PowerPoint, Outlook, etc), Primavera, CostWorks, etc. Have the ability to adapt to new software such as eCMS, MS Teams and Zoom may also be necessary. </li>
<li>The Contractor shall obtain all required corporate and personnel Security Clearances prior to commencement of work. The Contractor shall ensure that a list of all personnel with Security Clearances is maintained and current, including clearances that are pending. Each task order shall establish necessary base/building access requirements </li>
</ul>

<h3>Job Description</h3>
Job Description
Engineering Technician I – V – NSWCPD Code 316
Salary Grade/Level/Family/Range
Jacksonville / Mayport
Technician I: $17.66/hour
Technician II: $19.82/hour
Technician III: $22.17/hour
Technician IV: $27.46/hour
Technician V: $33.59/hour
Up to an additional $5.09/hour health &amp; welfare, depending on benefit enrollment
 
Kings Bay, GA
Technician I: $17.14/hour
Technician II: $19.24/hour
Technician III: $21.52/hour
Technician IV: $26.66/hour
Technician V: $32.61/hour
Up to an additional $5.09/hour health &amp; welfare, depending on benefit enrollment
 
Company Overview:
KMS Solutions, LLC is a technical management / solutions company that specializes in engineering, analysis, and cyber security. Founded in 2005, KMS is a certified small business with nearly two decades of experience supporting the Department of Defense as well as many other departments and programs critical to our Nation’s security and well-being. 
KMS is a two-time winner of the USA Today Top Workplaces recognizing quality workplace cultures across the United States who put their employees first. Additionally, we received the Providence Journal Rhode Island Top Workplaces award and Culture Excellence Awards for Compensation &amp; Benefits, Innovation, Leadership, Purpose &amp; Values and Work-Life Flexibility
Position Summary / Objective:
The Naval Surface Warfare Center Philadelphia Division (NSWCPD) is a Department of Defense entity responsible for research and development, test and evaluation, engineering, and Fleet support services for the Navy’s ships, submarines, military watercraft, and unmanned vehicles. This position supports NSWCPD Code 316, which is responsible for the Planned Maintenance System (PMS)/Class Maintenance Plan (CMP), Reliability Centered Maintenance (RCM) and PMS Service Request (PSRs), review of New Construction PMS Contract Deliverables, and PMS update and development for in-service, modernization, new construction, and land-based engineering test site maintenance documents.
Essential functions:
Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions.
<ul>
<li>Review Engineering and technical documentation to determine compliance with engineering standards, technical accuracy, and adequacy in relation to functional, operational, and technical requirements.</li>
<li>Perform engineering analysis, reviews, studies and provide recommendations related to the development, interoperability, integration, operations, and use of Maintenance Standards during system, subsystem, and equipment maintenance.</li>
<li>Collaborate with the customer and various organizations, offering in-depth research and data analysis to improve engineering documentation and provide informed technical feedback.</li>
<li>Assist in reviewing, tracking, and analyzing Fleet feedback (e.g., Maintenance Index Pages (MIPs), Maintenance Requirement Cards (MRCs), LARS, TFBRs, and LARs) related to machinery systems.</li>
<li>Support engineering teams in updating PMS documentation based on in-service reliability and maintenance data.</li>
<li>Provide technical input for the development and modification of Integrated Logistics Support (ILS) products, including technical manuals, maintenance plans, and provisioning documentation.</li>
<li>Use Navy databases and tracking tools (e.g., CDMD-OA, SKED, OMMS-NG, TDMIS) to retrieve and validate logistics and maintenance data.</li>
<li>Participate in Failure Review Boards, Technical Feedback Reviews, and support the analysis of failure trends.</li>
<li>Draft reports and documentation related to PMS changes, logistics deficiencies, or process improvements.</li>
<li>Collaborate with engineers, logisticians, and program office staff to address shipboard maintenance and support issues.</li>
<li>Provide administrative functions for program efforts in special situations including, but not limited to meetings, and preparing/maintaining history files.</li>
</ul>
Required education and experience:
<ul>
<li>High School Diploma or Accredited GED equivalent.</li>
<li>Bachelor of Science (or higher) in Mechanical Engineering may be substituted for relevant experience requirement.</li>
<li>Required years of professional experience as an Engineering Technician:
<ul>
<li>Engineering Technician I - Entry Level</li>
<li>Engineering Technician II - 1 year</li>
<li>Engineering Technician III - 3 years</li>
<li>Engineering Technician IV - 7 years</li>
</ul>
</li>
</ul>
Preferred education and experience:
<ul>
<li>Bachelor of Science (or higher) in Mechanical Engineering.</li>
<li>Familiarity with Maintenance Standards and Hull, Mechanical, and Electrical (HM&amp;E) systems is a plus.</li>
<li>Current or recent shipyard and maintenance availability experience and be familiar with availability work packages and tracking metrics.</li>
<li>Experience as a PQS Worker, Work Center Supervisor, or 3M Coordinator within the Navy’s maintenance system.</li>
<li>Familiarity with the Navy’s PMS and ILS concepts.</li>
<li>Familiarity with engineering documentation standards and quality assurance practices.</li>
<li>Experience with Ship Maintenance and Logistics databases (e.g., SKED, OMMS-NG, TDMIS, CDMD-OA).</li>
<li>Knowledge of Configuration Management (CM) and life-cycle support concepts.</li>
<li>Technical writing experience, particularly with maintenance or logistics documentation.</li>
<li>Adept at learning new systems and terminology.</li>
</ul>
Competencies:
<ul>
<li>Proficiency in Microsoft Office, specifically, Word, Excel, PowerPoint, and Outlook software.</li>
<li>Excellent verbal and written communication skills, as well as presentation skills.</li>
<li>High comfort level working with and around all military/organizational levels, clients, customers, suppliers, and visitors.</li>
<li>Must be highly reliable and demonstrate personal initiative to operate in a fast-paced environment with changing priorities.</li>
</ul>
Additional eligibility requirements
Work authorization/security clearance requirements:
Active Secret clearance is required.
Other Duties:
Please note this job posting is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.
Supervisory Responsibility:
None
Work Environment:
This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, and photocopiers.
Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
While performing the duties of this job, the employee is regularly required to talk or hear. Excellent listening skills are essential. The employee frequently is required to stand, walk, use hands to finger, handle or feel, and reach with hands and arms. Must be able to lift up to 20 lbs.
Position Type/Expected Hours of Work:
The typical workday is eight hours in length. Some flexibility in hours is allowed, with concurrence from the supervisor. Attendance at prescheduled mandatory meetings is required. Must be available during the core work hours as determined by your contract/location and must account for the required number of hours in a pay period to maintain Full-time status.
Telework:
<ul>
<li>Situational telework may be allowed for this position subject to customer requirements/expectations.</li>
</ul>
Travel:
<ul>
<li>Ability to travel CONUS; potential to travel OCONUS </li>
<li>Travel up to 10% may be required</li>
</ul>
Benefits and Additional Compensation:
KMS offers a competitive benefits package including medical, dental and vision insurances, flexible spending account, PTO, paid holidays, military leave, bereavement leave, 401k / retirement savings plan, professional development and tuition reimbursement, basic and voluntary life insurance / AD&amp;D, short-term and long-term disability, voluntary AFLAC supplemental insurance products and employee assistance plan (EAP) program. Additionally, KMS offers employee referral bonuses and a discretionary annual bonus.
AAP/EEO Statement:
KMS Solutions provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.
KMS Solutions is a drug free workplace.
 
#ZR
#LI-KMS

Engineering Technician I - V - NSWCPD Code 316

<h3>Job Description</h3>
Job Description
Location: Washington, DC
Clearance: TS or Q
BluePath Labs is a fast-growing research and consulting company committed to solving complex problems for federal, state, and local government clients. We offer a range of professional, scientific, and technology services. Our specific areas of expertise include business consulting, research and data science, and technology integration.
We are actively seeking a Top Secret–cleared Engineer Specialist II or III to support the National Nuclear Security Administration (NNSA) Office of Stockpile Sustainment (OSS). 
Work Description:
A successful candidate would have NNSA or DOD experience and a BS in an engineering field. 
Responsibilities:
<ul>
<li>Support Mission Operations and Logistics Management between NNSA and DoD. Conduct analysis and tracking for periodic reports related to programs under Multi-Weapons System (MWS) and Weapons Dismantlement &amp; Disposition (WDD).</li>
<li>Program Support and Independent Technical Analyses of the NNSA Product Realization Integrated Digital Enterprise (PRIDE) Program.</li>
<li>Leverage Site Experience in Program Management.</li>
</ul>

Engineer Specialist

<h3>Job Description</h3>
Job Description
EWA Warrior Services, Sigma Defense company, is seeking a part-time, on-call Engineering Technician at Fort Johnson, LA to support our unit rotation schedules. The frequency of work can be 7 to 10 times a year for approximately 1500 hours, or more, many of which are overtime hours. Shift hours will vary with mission requirements. Our Surge Technicians can work 14 consecutive days during unit rotations, and we support up to 10 rotations per year at the Fort Johnson location. 
Equal Opportunity Employer/Veterans/Disabled: Sigma Defense Systems is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.
Requirements
<ul>
<li>Must be able to work outside on the range throughout the year where temperatures and weather conditions vary. </li>
</ul>
<ul>
<li>Physical requirements include:</li>
</ul>
<ul>
<ul>
<li>Standing (45%)</li>
<li>Walking (25%)</li>
<li>Sitting (20%)</li>
<li>Reaching (5%)</li>
<li>Lifting 50 - 100 pounds independently or with the assistance of others (5%)</li>
<li>Crouching in tight spaces inside unit vehicle (10%)</li>
</ul>
<li>Must be able to work all shifts, including weekends, holidays, and overtime when called to work. Call-ins may be short notice, but shifts are required to support test missions. </li>
<li>Must be able to wear appropriate Personal Protective Equipment (PPE) for work tasks assigned. </li>
<li>Due to real-world, war-time environments, Technicians must be able to handle combat simulation and maneuvering exercises. </li>
<li>Technicians are exposed to loud noises including explosive devices, live gun fire/ammunitions firing war-time simulation, and loud noises generated from inside military vehicles during missions, troop support, and while working on the range. </li>
<li>Experience working with the US Government or Military is preferred. </li>
<li>Knowledgeable with networking and component configuration set-up and troubleshooting. </li>
<li>Work experience as a technician in any of the following fields is a plus:</li>
<ul>
<li>Mechanic</li>
<li>Electrician </li>
<li>Communications Systems Repairman</li>
<li>Hydraulic/Pneumatic System Repairman</li>
<li>CDL Holder</li>
</ul>
<li>A current Driver's License is required as the Technician must be insured through the company's vehicle insurance policy while operating company, government, and or rental vehicles during working hours through the duration of employment. </li>
<li>Must be a U.S. Citizen.</li>
</ul>
Education Requirements:
<ul>
<li>High School Diploma or equivalent. </li>
</ul>
Computer Programs/Software Experience:
<ul>
<li>Familiar with Microsoft Office Suite to include Excel, Word, and Internet Explorer. </li>
</ul>
Clearance Level:
<ul>
<li>Candidate must possess or be able to obtain a government-issued Secret security clearance. </li>
</ul>
<ul>
<li>Clearance will be sponsored for the right candidate. </li>
</ul>
Essential Job Duties/Responsibilities (Not all-inclusive):
<ul>
<li>Input data into various user interface applications with the ability to save and transfer data via USB sticks, CDs, hard drives, or other storage devices.</li>
</ul>
Compensation: $21.11 per hour.
Benefits
Health and Welfare:
<ul>
<li>$4.93 per hour (in addition to hourly base rate listed above) </li>
</ul>

1482 - Engineering Technician IV

<h3>Job Description</h3>
Job Description
Essential Duties &amp; Responsibilities
<ul>
<li>Engineering &amp; Technical Support</li>
<ul>
<li>Assist corporate and site engineers in preparing detailed mine plans, layouts, design drawings and permit applications for active and proposed operations.</li>
<li>Maintain centralized files of permit applications, maps, engineering drawings, and technical documentation for all operations.</li>
<li>Support engineering teams in analyzing mine progress and projections to provide consistency with permitting activities.</li>
</ul>
<li>Permitting &amp; Regulatory Support</li>
<ul>
<li>Prepare maps, exhibits, and technical drawings for state and federal permit applications, renewals, and revisions.</li>
<li>Work closely with the Environmental and Permitting Departments to ensure permit drawings meet regulatory standards (WVDEP, KY DNR, OSMRE, MSHA).</li>
<li>Track and organize permit boundaries, acreage totals, and affected areas using GIS and CAD-based mapping tools.</li>
<li>Verify permit consistency with operational mine plans and assist in resolving discrepancies.</li>
<li>Support the preparation of responses to regulatory inquiries or inspection requests with accurate engineering documentation.</li>
</ul>
<li>Cross-Functional Coordination</li>
<ul>
<li>Collaborate with mine-site engineers, surveyors, and environmental staff to ensure consistent data collection and map updates.</li>
<li>Support Legal, Land, and Environmental departments by producing technical exhibits for lease agreements, boundary verifications, and reclamation plans.</li>
<li>Assist corporate management in technical presentations, reports, and internal audits.</li>
<li>Serve as a resource for troubleshooting technical CAD or mapping issues across the company.</li>
</ul>
<li>Compliance &amp; Quality Assurance</li>
<ul>
<li>Maintain all mapping and engineering documentation in accordance with MSHA, OSMRE, and state regulations.</li>
<li>Participate in internal audits and quality reviews of engineering and permit maps.</li>
<li>Ensure timely updates of operational changes to prevent discrepancies in regulatory filings.</li>
<li>Handle confidential property and operational data in a professional and secure manner.</li>
</ul>
</ul>
Qualifications
<ul>
<li>Associate or Bachelor’s degree in Mining Engineering Technology, Civil Engineering Technology, or a related field; equivalent work experience in mining engineering, mapping, or permitting will be accepted in lieu of a degree.</li>
<li>3–7 years of experience in engineering, mapping, or permitting support within the mining industry.</li>
<li>Proficiency in AutoCAD, Civil 3D, and GIS platforms; experience with mine planning or permitting software preferred.</li>
<li>Strong understanding of mining permitting processes (WVDEP, KY DNR, OSMRE, MSHA).</li>
<li>Working knowledge of both surface and underground mining operations.</li>
<li>Excellent organization and communication skills with the ability to manage multiple priorities across sites.</li>
<li>High attention to detail, with demonstrated accuracy in technical drawings and data management.</li>
</ul>

1,330 Engineering Jobs in United States