field_job_occupational_field_parents_all

field_job_employment_type

job_organization_name

city

state

<h3>Job Description</h3>
Job Description
ESSENTIAL DUTIES, RESPONSIBILITIES &amp; AUTHORITIES include the following. Other duties may be assigned.
• Conducts electrical testing of power supplies with the Engineering group on test bench.
• Performs assembly of product or equipment if required.
• Works with engineering group to complete required task and activities.
• Compiles test data from performed testing and reports and reviews test results with engineers.
• Performs Qualification, Safety Agency and Design Verification Testing for new and existing products
• Confers with Engineering, and technical personnel to resolve testing problems such as product or equipment issues, malfunctions, incomplete test data and data interpretation.
• Analyzes indicated and calculated test results in relation to design or rated specifications and test objectives, and modifies or adjusts equipment to meet specifications.
• Records test procedures and results, numerical and graphical data, and recommendations for changes in product or test method.
• Sets up and conducts tests of complete units and components under operational conditions to investigate design proposals for improving equipment performance or other factors, or to obtain data for development, standardization, and quality control.
• Checks calibration stickers and calibration certificates of Safety Engineering equipment as soon as annual calibration is complete to ensure that relevant information are correct and uncertainty of measurements are in accordance with UL Document 00-OP-C0034, Equipment Accuracy Requirement.
• Troubleshoot and repair damaged products if required.
QUALIFICATIONS FOR AN ENGINEERING TECHNICIAN
• Associates’s Degree from a two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience.
• Must work independent with minimal supervision
• Knowledge of Electronic test techniques and equipment
• Knowledge of DC, AC and analog circuits a must
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.
• Ability to calculate figures and amounts such as proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.
• Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
• To perform this job successfully, an individual should have knowledge of Microsoft Office Excel Spreadsheet software and Microsoft Office Word Processing software. =
Competencies 
To perform the job successfully, an individual should demonstrate the following competencies :
• Problem Solving - Identifies and resolves problems in a timely manner; Develops alternative solutions; Works well in group problem solving situations.
• Customer Service - Responds promptly to customer needs; Responds to requests for service and assistance.
• Interpersonal Skills - Maintains confidentiality; Remains open to others' ideas and tries new things.
• Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions.
• Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Able to read and interpret written information.
• Teamwork - Balances team and individual responsibilities; Gives and welcomes feedback.
• Motivation - Demonstrates persistence and overcomes obstacles.
• Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently.
• Professionalism - Approaches others in a tactful manner; Reacts well under pressure.
• Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent.
• Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions.
Qualifications / Education
Required - Associates or better in Electrical Engineering or related field.
ABOUT TDK-LAMBDA AMERICAS INC.
Acquired by TDK in 2008, TDK-Lambda Americas Inc. represents the culmination of three well-established North American power manufacturers: Electronic Measurements Inc., Lambda Electronics, and Innoveta Technologies. We have earned the reputation of being a trusted world-class organization through a history of providing reliable and innovative power supplies. Our broad product offering features over 6,000 models that are suited for many applications, including medical, industrial, broadcast, defense, factory automation, and LED/LCD signage. Our view is that "power supply" is more than just an electronic device, but the heart of our customer's systems. This belief has helped us become a global leader in our industry.
We employ approximately 300 people in our engineering, manufacturing, and sales offices across the United States. At our company, we value the work and ideas of our employees. They are encouraged to express their opinions and take the initiative, which has helped with the growth of our community and kept us at the cutting edge of new technologies. We offer our employees not only a career opportunity but also an environment that allows them to succeed.
TDK-Lambda Americas offers great benefits and perks, including healthcare benefits, a 401(k) with match, paid time off (PTO), educational assistance, recognition plans, service awards, and performance-based awards.
To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. TDK-Lambda Americas is an Equal Opportunity, Affirmative Action Employer and is committed to the full inclusion of all qualified individuals. In keeping with that commitment, we will take the steps to assure that people with disabilities are provided reasonable accommodations to perform the essential functions of the position.
Company DescriptionThanks to our dedicated employees who work hard to provide the best quality products, TDK-Lambda Americas is one of the most trusted manufacturers of high-quality power supplies in the world. At TDK-Lambda Americas (TLA), we value your work and ideas. You will be able to express your opinion, learn and grow with very talented people from all around the world. You will use your strengths and ambitions to face new challenges, be creative and try new ideas. Your initiative will continuously help our company grow and be at the cutting edge of new technologies. TLA is committed to offer our employees not only a career opportunity, but also an environment that encourages them to succeed. To support the development of our colleagues and build enthusiastic teams. To offer different learning objectives at different stages of development, to develop your skills and to make a difference. By choosing us, you will be a valued member of the TLA team. Come join our dynamic workforce &amp; build your career with us and you will enjoy excellent work opportunities! 
<h3>Company Description</h3>
Thanks to our dedicated employees who work hard to provide the best quality products, TDK-Lambda Americas is one of the most trusted manufacturers of high-quality power supplies in the world. At TDK-Lambda Americas (TLA), we value your work and ideas.\r\nYou will be able to express your opinion, learn and grow with very talented people from all around the world.\r\nYou will use your strengths and ambitions to face new challenges, be creative and try new ideas.\r\nYour initiative will continuously help our company grow and be at the cutting edge of new technologies.\r\nTLA is committed to offer our employees not only a career opportunity, but also an environment that encourages them to succeed. To support the development of our colleagues and build enthusiastic teams. To offer different learning objectives at different stages of development, to develop your skills and to make a difference.\r\nBy choosing us, you will be a valued member of the TLA team. Come join our dynamic workforce &amp; build your career with us and you will enjoy excellent work opportunities!

Engineering Technician

<h3>Job Description</h3>
Job DescriptionKDG Construction Consulting is seeking a Tom Bradley International Terminal (TBIT) Refresh Office Engineer join our growing team. The TBIT Refresh Office Engineer provides a broad spectrum of technical and administrative duties primarily associated with submittal and Request for Information (RFI) management as well as construction management support. Supports the project management team (project manager, assistant PM, construction manager, design manager, etc.). Responsibilities and Duties:
<ul>
<li>Assist the TDIP Refresh project team in the receipt, distribution and maintenance of submittals. Perform construction contract correspondence, document and plan control function, input data into Prolog, and prepare management information status report, as required.</li>
<li>Update and maintain logs for submittals and RFIs in Prolog, the project information system.</li>
<li>Maintain project files and document / submittal management systems (hard and electronic copies). Work with the TBIT Refresh Contractor(s) to ensure the drawings are posted efficiently and in a timely manner. Distribute documents, submittals and RFIs for review; track and compile responses/review comments, obtain management approval and issue responses to TBIT Refresh Contractor(s).</li>
<li>Manipulate electronic files of various formats to create exhibits for presentations and meetings.</li>
<li>Complete other responsibilities and assist as assigned to support the project such as: attend and document project meetings (write agendas and minutes), perform expediting functions, and prepare and maintain an expediting log; etc. </li>
</ul>
Hardware/Software Knowledge:
<ul>
<li>Proficient in Microsoft Office Suite and Bluebeam</li>
<li>Ability to work in CAD or REVIT preferred </li>
</ul>
Required Qualifications:
<ul>
<li>5 years or more experience, preferably on airport projects</li>
<li>Bachelor’s degree in Engineering, Construction Management or other related field required</li>
<li>Experience with projects more than $50 million in value</li>
<li>Experience with various delivery methods, including Design-Bid-Build, Design+CMAR and Design/Build</li>
<li>Excellent written and oral communication skills and a thorough knowledge of industry practices and regulations</li>
<li>Optional certifications may include AAAE, LEED, PE, PMP, AICP, etc. or any other relevant professional license or certifications.</li>
</ul>
Anticipated Salary Range: $85,000.00 - $91,200.00 per year The offered salary will be based on the applicant's qualifications, education, experience, and work location. About KDG: KDG Construction Consulting is a leading provider of program, project, and construction management services. The firm serves clients in a broad range of markets throughout Southern California, including aviation, transportation, and infrastructure. KDG provides a full spectrum of management and technical services spanning the entire life cycle of a construction project. Employment with KDG: KDG is an Equal Opportunity Employer, and qualified applicants will receive consideration for employment without regard to race, coidentity, national sexual orientation, gender identity, national origin, veteran or disability status.
Powered by JazzHR
hIJYtJ7VoW

Office Engineer I

<h3>Job Description</h3>
Job Description
At Verterra Energy, we're on a mission to harness the power in the world's rivers, canals, and oceans. To accomplish this, we are commercializing our first device called VOLTURNUS, a pioneering water-power technology that deploys in harmony with the current to capture baseload, zero-emission electricity. 
Backed by top-tier investors and a multi-year government contract, we are growing our founding team to help achieve key milestones. We have also recently partnered with NIRON, DoD, DoE, University of Minnesota, WEG Group, Beckhoff, Pacific Northwest National Laboratory, and the US Army Corp of Engineers! 
Feel free to check out our most recent press releases here! 
Candidate Profile: 
We are seeking a highly skilled and versatile Engineering Technician to support multiple engineering disciplines and contribute across fabrication, manufacturing, and other technical functions. This individual will lead efforts for instrumentation, testing and data collection, working closely with engineering and manufacturing teams. The ideal candidate is hands-on, technically proficient, and capable of independently owning and executing projects. 
Requirements
Key Responsibilities: 
<ul>
<li>Set up of test equipment utilizing data acquisition systems with a variety of sensors. </li>
<li>Conduct lab and field testing of components and systems in development. </li>
<li>Record test results and compile technical reports. </li>
<li>Support composites development, including fabrication and prep of molds </li>
<li>Setup of manufacturing equipment including fixture design and fabrication. </li>
<li>Collaborate with engineers to develop test plans and provide critical design inputs. </li>
<li>Conduct general machining and fabrication of various materials, including welding, grinding, milling, and lathe operations. </li>
</ul>
Must Have: 
<ul>
<li>Minimum of 5 years of professional experience in engineering or product development. </li>
<li>High school diploma or GED; candidates with a technical degree will receive preference. </li>
<li>Proficient in setting up data acquisition systems and working with various sensor technologies. </li>
<li>Competent in using Microsoft Office Suite for documentation and presentations. </li>
<li>Strong mechanical aptitude with a proactive, solution-oriented mindset; able to work effectively under pressure with a positive and professional attitude. </li>
<li>Must be able to lift 50+ pounds as required in support of facility operations and testing. </li>
<li>Proven ability to collaborate effectively in a cross-functional, team environment  </li>
<li>U.S. Person (U.S. citizen, permanent resident, or granted refugee or asylee status) as defined here: <a href="https://www.ecfr.gov/current/title-22/chapter-I/subchapter-M/part-120/subpart-C/section-120.62" target="_blank">https://www.ecfr.gov/current/title-22/chapter-I/subchapter-M/part-120/s…</a>  </li>
</ul>
Nice to Have: 
<ul>
<li>10+ years of experience in engineering or product development. </li>
<li>Experience with CNC machining. </li>
<li>Ability to read and interpret engineering drawings, blueprints, and technical specifications. </li>
<li>Experience with electrical schematics and harness fabrication. </li>
<li>Proficiency with composite materials and processes, including hand lay-up and vacuum bagging. </li>
<li>Experience operating forklifts </li>
</ul>
Benefits
<ul>
<li>Comprehensive Medical, Dental &amp; Vision insurance </li>
<li>Health Savings Account (HSA) with a generous annual company contribution of $500 (available with qualified plan enrollment) </li>
<li>Flexible Spending Account (FSA) for medical expenses </li>
<li>Dependent Care Flexible Spending Account (FSA) option </li>
<li>Short Term and Long Term Disability coverage - completely free for employees </li>
<li>Life insurance and Accidental Death &amp; Dismemberment (AD&amp;D) benefits - at no cost to you </li>
<li>401(k) plan featuring a company match </li>
<li>A generous PTO policy that includes: </li>
<li>Starting with 4 weeks of Paid Time Off (PTO) </li>
<li>2 weeks of sick and safe time </li>
<li>11 paid holidays recognized by the company </li>
<li>A flexible and accommodating work environment </li>
<li>An inviting modern kitchen with a comfortable break area, stocked with snacks and beverages </li>
<li>Bike-friendly workplace! </li>
<li>On-site shower and locker room facilities </li>
<li>Relocation support available </li>
</ul>

<h3>Job Description</h3>
Job Description
Magrym Consulting Inc. is seeking a qualified CMT Technician in Midland, Texas. As a growing company, technicians will have the opportunity to grow with us. Candidates should be willing to work overtime and weekends as required. 
Duties include:
<ul>
<li>Soil and Aggregate Sampling</li>
<li>Logging materials</li>
<li>Perform Aggregate, Soil and Concrete Testing</li>
<li>Lab and Field work</li>
<li>Follow ASTM and AASHTO Standards</li>
</ul>
<ul>
<li>Software data entry</li>
<li>Geotechnical sample logging</li>
<li>Maintaining a clean working environment</li>
<li>Accurate recording of timesheets</li>
<li>Daily travel to and from construction sites, generally within 100 miles from the home office</li>
<li>The ability to train to achieve minimum certificates in ACI, NICET, and/or State Testing Certificates within 6 months of hire</li>
<li>Ability to work outside in the vicinity of large construction equipment</li>
<li>Ability to utilize hand tools such as sledgehammers, shovels and picks</li>
<li>Observing and documenting field activities</li>
<li>Maintain equipment and lab vehicles</li>
<li>In-house equipment verification</li>
</ul>
General Skills:
<ul>
<li>Attention to detail</li>
<li>Basic Math, Microsoft Suite skills</li>
<li>Excellent communication with internal and external clients</li>
<li>General maintenance skills</li>
<li>Strong safety focus</li>
</ul>
Physical Requirements:
<ul>
<li>Ability to lift 60+ lbs</li>
<li>Stand in one place for 1 to 2 hours at a time</li>
<li>Ability to wear appropriate PPE for hazardous materials</li>
<li>Wear steel toe shoes as needed</li>
<li>Ability to work indoors and outdoors in all weather conditions</li>
<li>Ability to reach with hands and arms, climb or balance, and stoop, kneel, crouch or crawl.</li>
<li>At times, this position may be working at or on uneven terrain, varying heights, in confined spaces, or supported trenches.</li>
</ul>
Requirements
<ul>
<li>High School Diploma or equivalent</li>
<li>Valid Texas Drivers License</li>
<li>Clean driving record</li>
<li>ACI Field Technician Certification (preferred)</li>
<li>ACI Laboratory Technician Certification (preferred)</li>
<li>ACI Aggregate Base Testing Technician Certification (preferred)</li>
<li>Ability to pass a pre-employment/random drug test</li>
</ul>
Benefits
<ul>
<li>Dental insurance</li>
</ul>
<ul>
<li>Health insurance</li>
<li>Life insurance</li>
<li>On-the-job training</li>
<li>Paid time off</li>
<li>Paid Holidays</li>
<li>Paid training</li>
<li>401K Retirement plan</li>
<li>Vision Insurance</li>
<li>Dental Insurance</li>
<li>Short Term/Long Term Disability</li>
</ul>

Engineering Technician (CMT Testing)

<h3>Job Description</h3>
Job Description
Role Summary: This position involves around-the-clock oversight and support for maintenance tasks tied to a major electric transmission link, with activity based out of sites in both southern Connecticut and eastern Long Island. The technician reports directly to site leadership, including both the local operations manager and senior operations director.
Key Responsibilities:
<ul>
<li>Work rotating 12-hour shiftsday and nightincluding weekends and holidays. Emergency coverage may require being onsite at one of the two primary facilities.</li>
<li>Be available for backup coverage when not on shift, stepping in as needed for unexpected absences.</li>
<li>Monitor the performance and readiness of the high-voltage power transmission system, handle system control inputs remotely, respond to system alerts, manage call communications, and deploy maintenance staff as needed.</li>
<li>Maintain regular communication with regional grid operators and internal company contacts.</li>
<li>Keep thorough operational documentation, including logs, incident reports, fault tracking, and summaries of unusual activity.</li>
<li>Support diagnostics and repairs during planned downtime or unexpected equipment issues.</li>
<li>Offer technical assistance for system upgrades or engineering reviews, which may involve researching equipment specs or sourcing components.</li>
</ul>
Additional Expectations:
<ul>
<li>Approach responsibilities with an understanding of their impact on the broader system and business performance.</li>
</ul>
<ul>
<li>
Take on other assignments as directed by company leadership.
</li>
</ul>
Preferred Background &amp; Skills:
<ul>
<li>Degree (Associates or Bachelors) in electrical systems, engineering technologies, or a comparable field.</li>
<li>
Hands-on mindset with a collaborative, solution-driven attitude.
</li>
<li>
Able to independently seek out knowledge and solve problems.
</li>
<li>
Strong time management and task juggling abilities.
</li>
<li>
Effective communicator with solid math proficiency.
</li>
<li>Proficient in Microsoft Office; experience with system control platforms or engineering tools is a plus.</li>
<li>
Comfortable working nights, weekends, and holidays as needed.
</li>
<li>Prioritizes workplace safety and familiar with applicable safety and electrical standards.</li>
<li>Some exposure to electric utility operations and transmission infrastructure.</li>
<li>
Awareness of relevant industry rules and governmental regulations.
</li>
<li>Willing to complete formal training and obtain necessary operational certifications, maintaining them as required.</li>
<li>Must be a U.S. permanent resident or otherwise authorized to work in the U.S.</li>
</ul>
Travel Notes: A valid drivers license is required. Must be flexible with hours and prepared for occasional short-notice travel to assigned locations, including outside normal work hours.

Operational Engineering Technician

<h3>Job Description</h3>
Job Description
EWA Warrior Services, Sigma Defense company, is seeking a part-time, on-call Engineering Technician at Fort Johnson, LA to support our unit rotation schedules. The frequency of work can be 7 to 10 times a year for approximately 1500 hours, or more, many of which are overtime hours. Shift hours will vary with mission requirements. Our Surge Technicians can work 14 consecutive days during unit rotations, and we support up to 10 rotations per year at the Fort Johnson location. 
Equal Opportunity Employer/Veterans/Disabled: Sigma Defense Systems is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.
Requirements
<ul>
<li>Must be able to work outside on the range throughout the year where temperatures and weather conditions vary. </li>
</ul>
<ul>
<li>Physical requirements include:</li>
</ul>
<ul>
<ul>
<li>Standing (45%)</li>
<li>Walking (25%)</li>
<li>Sitting (20%)</li>
<li>Reaching (5%)</li>
<li>Lifting 50 - 100 pounds independently or with the assistance of others (5%)</li>
<li>Crouching in tight spaces inside unit vehicle (10%)</li>
</ul>
<li>Must be able to work all shifts, including weekends, holidays, and overtime when called to work. Call-ins may be short notice, but shifts are required to support test missions. </li>
<li>Must be able to wear appropriate Personal Protective Equipment (PPE) for work tasks assigned. </li>
<li>Due to real-world, war-time environments, Technicians must be able to handle combat simulation and maneuvering exercises. </li>
<li>Technicians are exposed to loud noises including explosive devices, live gun fire/ammunitions firing war-time simulation, and loud noises generated from inside military vehicles during missions, troop support, and while working on the range. </li>
<li>Experience working with the US Government or Military is preferred. </li>
<li>Knowledgeable with networking and component configuration set-up and troubleshooting. </li>
<li>Work experience as a technician in any of the following fields is a plus:</li>
<ul>
<li>Mechanic</li>
<li>Electrician </li>
<li>Communications Systems Repairman</li>
<li>Hydraulic/Pneumatic System Repairman</li>
<li>CDL Holder</li>
</ul>
<li>A current Driver's License is required as the Technician must be insured through the company's vehicle insurance policy while operating company, government, and or rental vehicles during working hours through the duration of employment. </li>
</ul>
Education Requirements:
<ul>
<li>High School Diploma or equivalent. </li>
</ul>
Computer Programs/Software Experience:
<ul>
<li>Familiar with Microsoft Office Suite to include Excel, Word, and Internet Explorer. </li>
</ul>
Clearance Level:
<ul>
<li>Candidate must possess or be able to obtain a government-issued Secret security clearance. </li>
</ul>
<ul>
<li>Clearance will be sponsored for the right candidate. </li>
</ul>
Essential Job Duties/Responsibilities (Not all-inclusive):
<ul>
<li>Input data into various user interface applications with the ability to save and transfer data via USB sticks, CDs, hard drives, or other storage devices.</li>
</ul>
Compensation: $21.11 per hour.
Benefits
Health and Welfare:
<ul>
<li>$4.93 per hour (in addition to hourly base rate listed above) </li>
</ul>

1482 - Engineering Technician IV

<h3>Job Description</h3>
Job DescriptionSenior Principal Validation EngineerLocation: Johns Creek, GA, Morrisville, NC, San Jose, CA, or Agoura Hills, CAHybrid Remote: 3 days in the office per week | Reporting To: Vice President, EngineeringResponsibilities:
<ul>
<li>Overseeing the automation of semiconductor data collection in a laboratory environment </li>
<li>Providing the framework for the validation environment – driving system performance and specification compliance for various memory interface chip products </li>
<li>Developing scripts for automating lab equipment and analyzing data </li>
<li>Working with processor memory interfaces, including DDR topologies and protocols, high-speed signaling, signal integrity, and power integrity </li>
<li>Assisting with the development of test methodologies, lab bring-up, validation, experimentation, and analysis</li>
<li>Supporting the application team, helping them to understand and resolve customer issues </li>
<li>Providing input and guidance for FPGA, system, and PCB design requirements </li>
</ul>
Requirements:
<ul>
<li>Highly technical with experience working in laboratory environments</li>
<li>Experience creating software for laboratory automation and data collection </li>
<li>Experience with Advantest V93000 (V93k) semiconductor test system – SoC, high-speed memory, mixed signals for integrated circuits </li>
<li>Knowledge of processor and memory system architecture, high-speed interface concepts </li>
<li>Experience with signal integrity and x86 computer systems</li>
<li>Hands-on experience with test and measurement equipment, troubleshooting, debugging</li>
</ul>
Benefits: 
<ul>
<li>Competitive medical, dental, vision, and life insurance plans – including HSA and FSA options</li>
<li>401K plan with company match </li>
<li>Employee stock purchase plan (15% discount) </li>
<li>Charitable gift giving match/plan</li>
<li>Relocation assistance </li>
</ul>
Compensation:
<ul>
<li>$200K - $240K + Bonus + RSUs</li>
</ul>

Senior Principal Validation Engineer

<h3>Job Description</h3>
Job Description
HVAC Commissioning Specialist
Start: ASAP
Contract Length: 4 months to start, likely to extend
Note: 80-90% travel required (all throughout the U.S.)
Pay: 40.00 - 50.50 per hour (depending on experience)
The Commissioning Specialist will support COMPANY’s internal and external stakeholders by coordinating, and delivering commissioning services throughout the facility planning, design, construction, warranty, and performance phases of the project. The Commissioning Specialist will apply technical expertise to deliver technical solutions to complex problems.
•Remote work location position; requires travel 80-90% of the time with 2-weeks+ between visits home
•Project safety requirements as needed.
•PPE, safety glass, work boots, high vis vest.
•HVAC and Building controls knowledge.
•Computer proficiency- Microsoft application
•Candidate will need to send in a very detailed daily report to detail what they worked on each day, etc.
PRIMARY DUTIES &amp; RESPONSIBILITIES:
•Collaborate on the development and implementation of commissioning process with sales, engineering, and construction teams. 
•Coordinates and directs the commissioning activities using consistent protocols and forms, centralized documentation, clear and regular communications and consultations with all necessary parties, frequently updated timelines and schedules and technical expertise.
•Review and comment on subcontractor submittals applicable to systems being commissioned for compliance with commissioning needs, concurrent with the engineering reviews.
•With necessary assistance and review from construction team and subcontractors, write the functional performance test procedures for equipment and systems. This may include energy management control system trending, stand-alone data logger monitoring or manual functional testing.
•Analyze any functional performance trend logs and monitoring data to verify performance.
•Responsible for preparation of progress reports, equipment checklist, commissioning logs, and final commissioning reports.
•Ensure that the commissioning process meets project long-term energy performance guarantees.
•Maintain accountability for project schedule and cost requirements.
•Develop constructive and long-lasting relationships with subcontractors and customers. 
EDUCATION/EXPERIENCE REQUIREMENTS:
•Looking for someone with 5+ years in the field experience with HVAC and controls and commissioning experience for commercial/industrial HVAC projects
•Experience with functional and operational testing along with QC checks.
•Manager is flexible on home location for the candidate as long as they are in the Mid Atlantic/East Coast area.
•Progressive experience in electrical, mechanical and energy services contracting
•Strong technical background with building automation and control systems. Able to review sequence of operations for electrical and mechanical systems and to perform point-to-point commissioning
•Ability to do project scheduling, building commissioning, retro, and re-commissioning of existing buildings, system by system commissioning requirements, Testing, Adjustment and Balancing (TAB) and verification procedures, building code issues is required.
•Must be proficient in computer and software such as MS Project, MS Office (Word, Excel, and PowerPoint), Building Automation System and commissioning program.
•Must be able to work with commissioning tools and technologies. .
•Valid driver’s license and the ability to travel and work off-hours as required by the project.
Other Details
•Applicants must be able to work a full day on a project site, combined sitting, standing, walking, and in front of the monitor.
•Applicants must be able to stand, climb ladders, and stairs, and get to wherever the problem is so they can see it for themselves.
 Pay Details: 40.00 to 50.50 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to <a href="https://www.pdstech.com/candidate-privacy" target="_blank">https://www.pdstech.com/candidate-privacy</a> The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: 
<ul>
<li>The California Fair Chance Act</li>
<li>Los Angeles City Fair Chance Ordinance</li>
<li>Los Angeles County Fair Chance Ordinance for Employers</li>
<li>San Francisco Fair Chance Ordinance</li>
</ul>
 Company DescriptionSince 1977, the PDS family of companies has become among the largest and most respected staffing companies in the United States. A vital part of the PDS family, PDS Tech Commercial connects highly skilled employees with Fortune 500 clients’ needs for project support such as contingent labor, statement of work/offload engineering projects, and permanent placements. PDS Tech Commercial has staffing partnerships with leading organizations based in the United States and globally. We hire jobseekers daily for openings across skill categories, including Engineering, IT, Business Professional, Administrative, Accounting/Finance, Skilled Trades and Industrial. We offer eligible associates an ala carte benefits package, that can include direct deposit, free career counseling, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonuses, and an affordable medical coverage plan. Now part of The Adecco Group, our shared synergies combined with the investment Adecco continues to make in PDS offers significant advantages to both clients and associates alike. We share Adecco’s dedication to unlocking our Associates’ potential by unleashing the Future@Work and to the importance of human and labor rights, diversity and inclusion, environmental responsibility, and more. 
<h3>Company Description</h3>
Since 1977, the PDS family of companies has become among the largest and most respected staffing companies in the United States. A vital part of the PDS family, PDS Tech Commercial connects highly skilled employees with Fortune 500 clients’ needs for project support such as contingent labor, statement of work/offload engineering projects, and permanent placements.\r\n\r\nPDS Tech Commercial has staffing partnerships with leading organizations based in the United States and globally. We hire jobseekers daily for openings across skill categories, including Engineering, IT, Business Professional, Administrative, Accounting/Finance, Skilled Trades and Industrial.\r\n\r\nWe offer eligible associates an ala carte benefits package, that can include direct deposit, free career counseling, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonuses, and an affordable medical coverage plan.\r\n\r\nNow part of The Adecco Group, our shared synergies combined with the investment Adecco continues to make in PDS offers significant advantages to both clients and associates alike. We share Adecco’s dedication to unlocking our Associates’ potential by unleashing the Future@Work and to the importance of human and labor rights, diversity and inclusion, environmental responsibility, and more.

HVAC Commissioning Specialist

<h3>Job Description</h3>
Job DescriptionBTI is seeking multiple Field Engineers (FEs) to work in collaboration with Veteran’s Administration PM and leadership to complete Telcom Services (voice and data) inventories and site surveys at all 350 VA Tier IV sites across the country. The Field Engineers will leverage VA templates and labeling nomenclature to thoroughly complete surveys, inventories, and associated documentation for voice and data services and hardware, to include photos. This may include tracing cables, checking dial tone, carriers, etc. Hardware will be inventoried to include type, serial #, version, etc.&nbsp; Each site is expected to take 2-3 weeks. The specific locations, schedule, approach, and templates for the site and inventory surveys will be directed by the Dept of VA’s PM and Operational Leadership. Each FE must be willing to travel 75% and have essential tools to include punch-down tool, butt set, dial tone tracing wand, able to lift 25 lbs., pass Public Trust, drug screening, and TB Testing. &nbsp;Must be a US Citizens. &nbsp;
Powered by JazzHR
fSGRlBdPkm

Field Engineer

<h3>Job Description</h3>
Job Description
For over 35 years, Yorktel has been the video managed services partner around the world for some of the largest business and government agencies. With over 10,000 video systems under management worldwide – more than any other video communications service provider – Yorktel has the proven expertise and global reach to deliver enterprise-quality visual communications. 
Yorktel is currently seeking a Sr. Field Engineer who will be focused on a fast-paced high-volume production and engineering department and staff. The Sr. Field Engineer is also responsible for meeting project commitments (both financial and non-financial) and the overall service of external customers. Responsibilities include but are not limited to strategic or operational planning within the field engineering departments, monitoring the performance of active projects, financial analysis to include job cost monitoring and reporting, staff training, adherence to standard operating practice and processes.
Roles &amp; Responsibilities:
<ul>
<li>Troubleshoot issues, make recommendations, and ensure problem resolution in conjunction with the assigned team.</li>
<li>Communicate complex technical issues and respond to detailed inquiries about resolving these issues.</li>
<li>Handle and protect confidential information, using discretion and judgment based on company policies.</li>
<li>Provide technical support to the sales team in a comprehensive, timely manner.</li>
<li>Interface with clients and job sites to document customer requirements and conditions.</li>
<li>Provide and document customer design based on client requirements and job site conditions.</li>
<li>Work directly with clients, architects, consultants, and staff throughout the design development and delivery process with support from the Supervisor.</li>
<li>Develop Statements of Work for each job based on system design and customer requirements.</li>
<li>Create system design drawings, including audiovisual system diagrams, specifications, and operational capability narratives.</li>
<li>Develop accurate job cost estimates.</li>
<li>Provide technical responses to customer RFPs/RFQs/RFIs.</li>
<li>Maintain complete and accurate project documentation and records.</li>
<li>Communicate effectively with internal staff, client representatives, cooperative trades, and subcontractors.</li>
<li>Coordinate and manage multiple system design projects.</li>
<li>Ensure successful completion of assignments on time and within budget.</li>
<li>Develop and conform to company technical standards and practices.</li>
<li>Correctly interpret technical specifications, schematic drawings, and architectural diagrams.</li>
<li>Create Scope of Work documents reflecting solution descriptions, capabilities, and limitations.</li>
<li>Present technical solutions to executive-level audiences at partner and client organizations.</li>
<li>Participate in transition activities to transfer information from pre-sales to implementation teams.</li>
<li>Create and test plans for solutions in both York-VCA and customer labs, emulating live environments.</li>
<li>Analyze customer networks to discern visual communications requirements.</li>
<li>Provide support for ad hoc and one-of-a-kind projects.</li>
<li>Research technical issues involving network and visual communications equipment.</li>
<li>Collaborate with manufacturers and vendors on current and future technologies to select applicable products for clients.</li>
<li>Perform other duties as assigned.</li>
</ul>
Leadership &amp; Supervisory Responsibilities:
<ul>
<li>None</li>
</ul>
Skills &amp; Abilities: 
<ul>
<li>Discretion in handling confidential information.</li>
<li>Effective troubleshooting and problem-solving skills.</li>
<li>Strong communication skills for addressing complex technical issues.</li>
<li>Ability to develop system design drawings and cost estimates.</li>
<li>Proficiency in technical documentation and project management.</li>
<li>Effective coordination and time management across multiple projects.</li>
<li>Knowledge of company policies, procedures, and technical standards.</li>
<li>Proficiency in creating Scope of Work documents and technical presentations.</li>
<li>Experience in pre-sales and implementation transitions.</li>
<li>Proficiency in testing environments and network analysis.</li>
<li>Strong understanding of audiovisual, videoconferencing, and IT products.</li>
<li>Knowledge of video and audio-conferencing service standards.</li>
<li>Familiarity with AutoCAD, Visio, or similar diagrammatic software tools.</li>
<li>Proficient in the use of computers and MS Office Suite (Outlook, Project, Excel, Word).</li>
<li>Knowledge of video network infrastructure commissioning and support.</li>
<li>Polycom/Tandberg/Cisco certification desirable (TCE/CVE).</li>
<li>InfoComm CTS certification (Advanced CTS-D desirable).</li>
<li>Willingness to pursue additional training related to job performance.</li>
<li>High levels of professionalism and integrity</li>
<li>High ability to work with peers</li>
<li>Exceptional customer service skills</li>
<li>Exceptional written, verbal, and interpersonal skills</li>
<li>Always maintain a professional attitude and appearance</li>
</ul>
Education &amp; Experience:
<ul>
<li>A degree in a related field, such as audio engineering, electrical engineering, or computer science, is preferred but not required. However, having one can demonstrate a strong foundation in technical skills and knowledge.</li>
<li>Certifications in specific AV systems, such as Crestron or AMX, are also helpful.</li>
<li>Several years of experience working with audiovisual equipment and systems, with a thorough understanding of design, installation, and troubleshooting.</li>
<li>Experience leading a team of technicians and managing projects, including creating project timelines and budgets.</li>
<li>Excellent communication skills and the ability to work effectively with clients to understand needs and provide solutions.</li>
<li>A successful candidate should possess a combination of technical expertise, project management skills, and strong communication abilities.</li>
</ul>
Additional Requirements: 
<ul>
<li>Ability to lift and carry objects up to 50 lbs. </li>
<li>Frequent sitting, standing, and walking </li>
<li>Limited weekend and/or night work may be required</li>
<li>Domestic travel requiring multi-night stays within and at times outside the local work area </li>
<li>Valid passport; International travel possible </li>
<li>Valid U.S. driver’s license </li>
<li>Must be willing to complete background checks and drug tests as required by current or future contracts </li>
<li>Must be willing to apply for security clearances, suitability, and other related clearances to be able to work at certain customer locations.</li>
</ul>
Join us and you will enjoy an excellent salary and benefits package, including 401k and Flex 125 plans.
We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities and veterans to apply to all of our job openings. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, genetic information and testing, family and medical leave, sexual orientation and gender identity or expression, protected veteran status, or any other characteristics protected by law. We prohibit retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination.

1,120 Engineering Jobs in Minnesota