Job Description
Job DescriptionWe are hiring Sr. CAD Engineer for a Contract position in Liberty, NC
CALL US NOW for immediate consideration! Click Apply on Web or Apply Now to view our recruiter s contact info and reach out today, we d love to speak with you!
=======================================================
• • We will NOT accept 3rd Party (C2C) Contractors * •
=======================================================
JOB DETAILS:
Position:Senior CAD Engineer
JOB REF#:44975 - 1510333
Duration:12+ Months (On-going Contract)
Location:ONSITE - Liberty, NC 27298
Pay Rate:$70.00 - $74.00 per hour (W2 Only)
• • Must be LOCAL or willing to RELOCATE at your own expense • •
• • This is role is 100% ONSITE MON-FRI, no remote work offered • •
The Manufacturing Engineering Department is seeking to hire Senior CAD Technician to support PE Battery manufacturing projects.
• Primary Focus: 2D drawings, 3D models/assemblies, facility layouts, utility tie-ins, equipment layouts, fabrication packages, contractor bidding packages, and as-built updates.
• Expected traits: Attention to detail, schedule ownership, clear communication, continuous improvement mindset, and ability to remove barriers
• Responsibilities: Ability to oversee a wide range of work, including 54+ CAD-related tasks.
CAD / Model Development:
• Create, revise, and maintain 2D CAD drawings and 3D models under PE direction and project standards.
• Develop facility, utility, process equipment, and installation layouts across mechanical, electrical, piping, HVAC, pneumatic, hydraulic, and production equipment scope.
• Support fixture, jig, sub-assembly, fabrication, and manufacturing aid drawings.
Fabrication / Installation Packages:
• Create contractor ready packages for installation, quotation, procurement, fabrication, construction, and bidding.
• Define equipment locations, tie-in points, utility routing, dimensions, elevations, access clearances, interfaces, and installation constraints.
• Support assembly drawings, fabrication drawings, Bills of Material, parts lists, and vendor/contractor drawing packages.
Field Verification / As-Built Control:
• Incorporate engineer markups, contractor redlines, field verification results, and as-built updates.
• Verify field conditions when existing drawings do not match actual conditions.
• Identify layout, construct ability, access, maintainability, safety, and production-flow concerns.
Coordination / Document Control:
• Coordinate drawing/model updates with PE, ES, Production, Maintenance, Safety, vendors, and contractors.
• Maintain CAD files, drawing registers, revisions, document-control records, and release workflows.
• Support production and installation teams through drawing updates, issue resolution, field walkdowns, and status reporting.
REQUIRED SKILLS/EXPERIENCE:
• 7+ years of CAD experience in industrial, manufacturing, construction, facility, or equipment installation environments.
• Must have proven GD&T (Geometric Dimensioning and Tolerancing) expertise.
• Experience managing multiple CAD/design projects and complex engineering tasks.
• Education: Associate degree, technical certification, CAD/drafting certificate, or equivalent practical experience.
Required CAD Tools:
• Advanced AutoCAD capability for 2D layouts, plant utilities, equipment layouts, installation drawings, and contractor scope drawings.
• Working proficiency with Autodesk Revit, Inventor, Navisworks, Autodesk Construction Cloud (ACC), and Autodesk Forma.
Drawing Package Capability:
• Create manufacturing-ready and construction-ready drawing packages.
• Interpret mechanical, electrical, pneumatic, hydraulic, piping, utility, facility, equipment layout, and vendor drawings.
• Incorporate redlines, field verification results, as-built updates, and drawing revisions.
• Apply drawing standards, title blocks, layers, naming conventions, revision control, drawing registers, release workflows, and transmittal expectations.
• Review supplier, contractor, and vendor drawings for dimensional accuracy, installation feasibility, interface conflicts, completeness, and alignment to project requirements.
Fabrication / BOM / GD&T:
• Create complete fabrication and installation documentation packages using Autodesk Inventor and/or AutoCAD 2D.
• Develop 3D assembly models, assembly drawings, detail drawings, fabrication prints, parts lists, balloon callouts, Bills of Material (BOM), material specifications, and contractor-ready bidding packages.
• Apply practical GD&T per ASME Y14.5, including datum structures, dimensional tolerances, critical functional requirements, weld symbols, materials, finishes, and fabrication requirements.
• Develop fabrication packages from engineering concepts, sketches, field conditions, project requirements, component selections, utility/equipment interfaces, and installation constraints.
Installation / Field Support:
• Support layout integration, utility routing, equipment access, service clearances, installation constraints, and equipment removal paths.
• Work in a manufacturing plant environment, including field walkdowns, contractor coordination, PPE usage, and occasional support outside normal office conditions.
Work Ownership:
• Manage multiple priorities with minimal supervision.
• Communicate clearly with engineers, contractors, vendors, and internal stakeholders.
• Own schedule follow-up and timely status reporting.
Other Requirements:
• 10% TRAVEL - Domestic
• 10% OVER-TIME - which covers weekends, holidays, and shutdowns, when required
• PPE: Will wear Steel Toed Shoes/Hard Hat and Safety Glasses
Desired Skills/Nice To Have's:
• Automotive, battery, clean room, dry room, electrode/module/cell production, or high-volume automated production experience.
• New plant startup, brownfield equipment installation, major model change, or production ramp-up support.
• Facility utilities such as compressed air, chilled water, process exhaust, HVAC, ventilation, dust collection, vacuum, chemical/process utilities, or electrical power distribution.
• CAD automation, drawing templates, BOM export workflows, spare-part documentation, or maintenance-support drawings.
• Mentoring junior CAD technicians or improving CAD standards, layer conventions, title blocks, and release processes.
• Autodesk Vault experience, including check-in/check-out, revision history, lifecycle/release workflow, and drawing search/retrieval.
• AutoCAD Plant 3D, Civil 3D, SolidWorks, CATIA, MicroStation, or other CAD/BIM/model coordination tools beyond the required Autodesk platform.
• AutoCAD Electrical, UniDraf, or similar systems for electrical, controls, or schematic drawing updates.
• Bachelor's degree in engineering, engineering technology, manufacturing, construction management, or related technical field.
• Autodesk certification, ASME Y14.5/GD&T training, OSHA 10, or similar technical/safety certification.
==========================================
==========================================
Calance Consultant Benefits Offerings:
• EPO/PPO Medical Plans
• HMO/PPO Dental programs
• Vision - VSP (Vision Plan Summary)
• 401K Retirement vesting program (VOYA)
• Paid Bi-Weekly/Direct Deposit
• Flex Spending Plan
• Voluntary Life, AD&D, STD or LTD plans
Estimated Pay Range: 153,920.00