Manual Machinist

Aerotek

Lakeville, MN, USA

Published: 6/14/2022

Manufacturing

Full Time

Job Description

Job Title: Manual Machinist

Job Description

The Manual Machinist sets up and operates manual machine tools to produce precision components to specification. This role requires strong blueprint interpretation skills, a solid understanding of GD&T, and the ability to perform accurate measurements to maintain tight tolerances. The position involves working with a variety of manual equipment in a small CNC shop where team members often take on multiple responsibilities.

Responsibilities

Set up and operate manual mills, lathes, drill presses, and grinders to produce precision parts according to specifications.
Read and interpret engineering drawings, blueprints, GD&T symbols, and work instructions to determine machining requirements.
Select appropriate tooling, determine and adjust machine speeds and feeds, and ensure proper work holding for each job.
Use micrometers, calipers, height gauges, bore gauges, and other precision inspection tools to verify part dimensions and accuracy.
Inspect parts throughout the production process to maintain tight tolerances and document inspection results as required.
Perform machine setup, including establishing offsets, verifying tool changes, and preparing equipment for production runs.
Troubleshoot machining issues, adjust setups, and refine processes to improve part quality and efficiency.
Operate and support work on manual Bridgeport mills, surface grinders, manual lathes, and manual mills in a job-shop environment.
Contribute to basic programming and operation of manual CNC equipment as needed.
Support general shop tasks and wear multiple hats to assist with various machining and production needs in a small team setting.

Essential Skills

Manual machining experience, with 2–5+ years preferred in a similar role.
Strong understanding of GD&T and its application to machining and inspection.
Proficiency with precision measuring instruments, including micrometers, calipers, height gauges, and bore gauges.
Ability to accurately read and interpret blueprints, engineering drawings, and work instructions.
Hands-on experience operating manual mills, manual lathes, drill presses, and grinders.
Capability to perform accurate machine setup, including tooling selection, speeds and feeds, and work holding.
Physical ability to lift 40–50 lbs and stand for extended periods during the shift.
Solid troubleshooting skills to resolve machining and dimensional issues on the shop floor.

Additional Skills & Qualifications

Experience operating Bridgeport mills and surface grinders.
Familiarity with manual CNC equipment, including basic programming, offsets, and tool changes.
Comfort working with both manual and basic CNC machining processes.
Ability to document inspection results and follow established quality control procedures.

Why Work Here?

You will join a small, close-knit shop that values hands-on craftsmanship and offers the chance to work on a variety of projects rather than repetitive, high-volume work. The company provides a competitive hourly wage based on experience, overtime opportunities, and a comprehensive benefits package that includes health, dental, and vision insurance. You can build long-term financial security through a 401(k) with company match, and enjoy paid time off and holidays to support a healthy work-life balance. Ongoing training and advancement opportunities allow you to continuously develop your skills and grow your career in a supportive environment where employees are trusted to take ownership and wear multiple hats.

Work Environment

The role is based in a small CNC shop with approximately 12 employees, where the atmosphere is practical and production-focused. The facility is somewhat dirty as is typical for a machining environment, but it is reasonably maintained and not excessively dirty. Team members work closely together and often wear multiple hats, contributing to different tasks as needed. The environment includes manual mills, manual lathes, drill presses, grinders, Bridgeport mills, surface grinders, and manual CNC equipment. Work involves standing for extended periods and handling parts that may weigh up to 40–50 lbs, with standard shop attire appropriate for a hands-on machining setting.

Job Type & Location

This is a Contract to Hire position based out of LAKEVILLE, MN.

Pay and Benefits

The pay range for this position is $30.00 - $60.00/hr.

Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors.

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)

Workplace Type

This is a fully onsite position in LAKEVILLE,MN.

Application Deadline

This position is anticipated to close on Aug 31, 2026.

About Aerotek

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK.

Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

\nCompany Description

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.