<h3>Job Description</h3>
Job Description
Now Hiring: Equipment Engineer
 Princeton, IN (On-site)
 Contract | Full Time
 Competitive Salary
 PTO + Benefits
 
Were seeking a detail-oriented Equipment Engineer to support project planning, engineering design, and equipment installation for vehicle performance systems. If you're experienced in electrical systems, technical specifications, and cross-functional collaboration, this Equipment Engineer position is for you.
 
What Youll Do as an Equipment Engineer:
<ul>
<li>(20%) Support project planning for upcoming model changes</li>
<li>(40%) Conduct simultaneous engineering for vehicle electrical control systems</li>
<li>(40%) Execute FEA, investigations, and write equipment bid specs; oversee installation/modifications</li>
<li>Collaborate across internal/external teams including TMC, TTC, NAMCs, and support shops</li>
</ul>
 
Qualifications for the Equipment Engineer Role:
<ul>
<li>B.S. in Electrical Engineering or equivalent with ECE emphasis</li>
<li>Proficient in AutoCAD, CATIA, XVL, Inventor</li>
<li>Skilled in interfacing computer hardware/software with vehicle ECUs (wired/wireless)</li>
<li>Knowledge of vehicle calibration standards (e.g., headlamp aim, radar cruise control)</li>
<li>Strong written and verbal communication skills</li>
<li>Proficient in MS Office</li>
<li>Valid drivers license with an acceptable driving record</li>
<li>Willingness to travel up to 20% domestically and internationally</li>
</ul>
 
Bonus Skills:
<ul>
<li>Experience with Electrical Systems</li>
<li>Background in Systems Engineering or Microcomputers/Embedded Systems</li>
</ul>
 
This is a great opportunity for a hands-on Equipment Engineer who thrives in collaborative, high-impact automotive environments. If you're ready to help drive innovation, apply now!
 
Equal Employment Opportunity Commission (EEOC) Statement
Reliance One, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.
 
This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Equipment Engineer

<h3>Job Description</h3>
Job Description
Summary 
The role of OSP Engineer will be responsible for the design of Mainstream’s growing fiber network. Design responsibilities will include backbone feeder design, lateral design to optimize customer additions, FTTH design, and enterprise business service design. The OSP Engineer will serve as the project owner from inception to completion. 
Role and Responsibilities 
<ul>
<li>Develop and maintain overall OSP system design for new market areas and existing OSP network</li>
<li>Conduct pre-design site visits</li>
<li>Attend county/town and/or other agency meetings as required</li>
<li>Prepare and maintains detailed assignment documents of fiber projects and communicate these with fiber engineers.</li>
<li>Perform aerial plant engineering, including coordinating make-ready and pole loading analysis with vendors</li>
<li>Perform underground fiber OSP design</li>
<li>Use CAD design software to produce fiber designs and bill of materials.</li>
<li>Prepare permits related to ROW, Railroad, and DOTs.</li>
<li>Perform QC of construction prints and splicing sheets submitted by outside contractors and other sources.</li>
<li>Provide input on best practices, permit processes, field construction methods, and telecom products.</li>
<li>Perform other related duties as assigned to ensure the effective operation of the department.</li>
<li>Ensure legal requirements are being met during network servicing area planning </li>
<li>Complete other tasks/duties as assigned</li>
</ul>
Qualifications and Education Requirements 
<ul>
<li>High School Diploma, or equivalent education, required</li>
<li>Bachelor’s degree in Science, Technology, Engineering or Mathematics preferred.</li>
<li>3-5 years outside plant design experience with 1-2 years FTTH experience.</li>
<li>Experience and understanding of outside plant engineering and construction techniques.</li>
<li>Experience working with Outside Plant Engineering in the following systems: AutoCAD, and or client-specific GIS software preferred.</li>
<li>Advanced experience with Microsoft Word, Excel, and PowerPoint.</li>
<li>Proven Safety record and documented training and knowledge of OSHA requirements</li>
</ul>
Preferred Skills 
<ul>
<li>OSHA,CPR, or CDL certification/licenses, preferred</li>
<li>ERSI ARC GIS, ARROW, VETRO, IQ GEO or experience with like systems is a plus</li>
<li>Knowledge of OSP Engineering/Construction practices and standards.</li>
<li>Understanding of aerial construction, including span lengths, pole loading, anchoring, guying and attachment heights, as well as familiarity with joint use regulations.</li>
<li>Experience in Microsoft Office.</li>
<li>Experience in identifying public Right of Way.</li>
<li>Flexible, team player attitude, with the ability work on all aspects of a given project along with any other tasks beneficial to the company and its growth.</li>
<li>Good written and verbal communication.</li>
<li>Excellent time management skills, and the capability to be mostly self-directed</li>
<li>Strong attention to detail</li>
<li>Ability to Multi-task and Manage changing priorities.</li>
<li>Project Management a plus.</li>
</ul>
Additional Notes 
<ul>
<li>This position is a combination of office and outside work. Exposure to the elements may be required from time to time.</li>
</ul>
Mainstream Fiber Networks reserves the right to modify, interpret, or apply this job description in any way the organization desires. This job description in no way implies that these are the only duties, including essential duties, to be performed by the employee occupying this position. This job description is not an employment contract, implied or otherwise.

OSP Engineer

<h3>Job Description</h3>
Job Description
Toyota’s Final Assembly Production Engineering Department is seeking a passionate and highly motivated Equipment Engineer to support our Vehicle Performance lines within our assembly group. As an Equipment Engineer, you will support new model introduction, focusing on the calibration and software writing of vehicle electrical systems. You will utilize computer hardware/software and digital tools to interface with vehicle ECUs, ensuring a general understanding of vehicle electronics communication protocols. This role requires proficiency in 2D and 3D CAD tools such as AutoCAD, Inventor, Catia, and XVL to perform new model investigations.
Breakdown:
<ul>
<li>(20%) Project Planning Support for upcoming model changes</li>
<li>(40%) Simultaneous Engineering for assembly of vehicle electrical control systems</li>
<li>(40%) FEA, Investigations, Equipment Bid Specifications, and Installation\Modifications for Vehicle Performance equipment</li>
</ul>
Must Haves:
<ul>
<li>Bachelor’s degree in Electrical Engineering or related field</li>
<li>Proficiency in AutoCAD, Catia, XVL, Inventor</li>
<li>Ability to interpret technical standards for vehicle calibration and communications</li>
<li>Experience with computer hardware/software interfacing (wired and wireless) for vehicle ECUs</li>
<li>Skill in developing detailed specifications for vehicle calibration (e.g., headlamp aim, radar cruise control)</li>
<li>Proficiency in MS Office (Outlook, Excel, Word)</li>
<li>Ability to travel up to 20%, including to Japan</li>
<li>Valid driver’s license and acceptable motor vehicle record</li>
</ul>
Plusses:
<ul>
<li>Ability to read Japanese</li>
<li>Electrical Systems experience</li>
<li>Systems Engineering and Analysis experience</li>
<li>Microcomputer and/or Embedded Systems experience</li>
</ul>

<h3>Job Description</h3>
Job Description
We're ALTEN Technology USA, an engineering company that provides solutions for engineering, technology, and product development projects. For decades, we've been helping our clients develop products that are changing the world, whether that's by shaping the future of space exploration, saving lives with medical devices that set a new standard of care, or creating the fully autonomous electric taxi of tomorrow. Our team of more than 600 people works across industries including aerospace, medical devices and life sciences, unmanned systems and robotics, automotive OEM and tier 1 suppliers, commercial vehicle, electric vehicles, rail, and more. Our offices across the US have different industry focuses and engage with our clients in different ways, ranging from working on-site at client facilities to performing product development at our delivery centers. ALTEN Group, our parent company, has been a leader in engineering and information technology for more than 30 years. ALTEN Group operates in 30 countries across Europe, North America, Asia, Africa and the Middle East and employs more than 36,000 people, 88% of whom are engineers. The company covers the whole development cycle and offers a choice of service levels, from technology consulting to complete project outsourcing. When you join ALTEN Technology USA, you join a group of people passionate about collaborating to solve some of the world's most technical engineering challenges. Our success is tied to taking care of our employees by building relationships and providing opportunities for mentorship and career growth. We offer comprehensive benefits for all full-time employees, including medical, dental, and vision insurance; a 401(k) plan with employer matching; paid time off (PTO); paid parental leave; and mentorship to help you take your career to the next level. You don't have to take our word for it that we are a great place to work—we were named on the 2023 Top Workplaces list thanks to feedback from our proud employees.
Summary:
<ul>
<li>The PE VMI Battery Department is seeking a highly motivated Electrical Field Engineer to support vehicle battery engineering initiatives. This role focuses on leading production equipment development, installation, and confirmation for new model product launches across North American manufacturing sites.</li>
</ul>
Key Responsibilities:
<ul>
<li>Lead battery pack assembly equipment development alongside site managers and global teams.</li>
<li>Develop equipment specifications for vendor fabrication.</li>
<li>Oversee and confirm equipment, conveyor systems, logistics, and operator interactions.</li>
<li>Monitor and track equipment design, fabrication, and validation.</li>
</ul>

Qualifications:
<ul>
<li>Bachelor's degree or higher in Engineering.</li>
<li>Minimum 2 years of experience with production equipment procurement, installation, and validation.</li>
<li>Proficiency in AutoCAD/Autodesk (reading, interpreting, and modifying 2D drawings).</li>
<li>Experience with CATIA and/or SolidWorks (reading, interpreting, and modifying 3D drawings).</li>
<li>Strong skills in MS Excel and PowerPoint.</li>
<li>Flexibility to work weekends, holidays, and multiple shifts for tooling modifications and installations (potential 12-hour shifts, weekend work, and 25% overtime).</li>
<li>Willingness to travel up to 50% domestically and internationally.</li>
</ul>

Preferred Qualifications:
<ul>
<li>Experience with battery pack assembly processes.</li>
<li>Experience in assembly or body weld equipment procurement and validation.</li>
<li>OSHA 10 certification.</li>
<li>Robotics experience for 3D automation.</li>
<li>Familiarity with CARROT/DELMIA.</li>
</ul>
ALTEN Technology is an Equal Opportunity Employer. Our Policy is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status.
Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process.

Vehicle Battery Engineer

<h3>Job Description</h3>
Job DescriptionDescription:
At Caritas we believe every life deserves LOVE! If you agree, then please consider joining our team!! This part-time position affords someone the pleasure of serving the AMAZING residents of Fox River Assisted Living. This role is perfect for a patient person who enjoys helping others. Most importantly, candidates must have a passion for enriching the lives of senior citizens. If this sounds like you, and you’re ready to work somewhere you can truly make a positive impact, please apply today!!!
 
Likely part-time hours may include: Mon-Sun 3pm to 8pm and/or 9am to 2pm.
 
PURPOSE: The Universal Service Worker monitors the health status of the clients/individuals and address their health-related needs, such as changing bandages, dressing wounds, or reminding them to take medication. The USW provides assistance with routine healthcare tasks and/or activities of daily living, bathing, toileting, or ambulation. We might also help with tasks such as preparing meals, doing light housekeeping, and doing laundry depending on the patient's abilities.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. 
<ul>
<li>Provide patients with help moving in and out of beds, baths, wheelchairs, or automobiles and with dressing and grooming.</li>
<li>Give medication reminders.</li>
<li>Provide personal assistance, medical attention, emotional support, or other personal care to others such as coworkers, customers, or patients.</li>
<li>Serve meals.</li>
<li>Care for patients by changing bed linens, washing and ironing laundry, cleaning, or assisting with their personal care.</li>
<li>Maintain records of patient care, condition, progress, or problems to report and discuss observations with supervisor. </li>
<li>Entertain, converse with, or read aloud to patients to keep them mentally healthy and alert.</li>
<li>Assist and engage patients in exercises and/or daily activities.</li>
<li>Assess the value, importance, or quality of things or people.</li>
<li>Observe, receive, and otherwise obtain information from all relevant sources.</li>
<li>Provide information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.</li>
<li>Identify information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.</li>
<li>Use relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards.</li>
<li>Compile, code, categorize, calculate, tabulate, audit, or verify information or data. </li>
</ul>
 
Requirements:
QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 
EDUCATION and/or EXPERIENCE REQUIRED/PREFERRED
Degree/Field Required: High school diploma (Related fields will be considered.) 
Degree/Field Preferred: N/A
Additional Fields of Knowledge Important for the Role: Customer and Personal Service — Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction. .
Experience Required: No minimum experience required but prefer previous health care experience (in caregiving role). 
Licenses/Certifications Required: N/A
Licenses/Certifications Preferred: CNA
SKILLS REQUIRED
Manager-specific: Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. 
Basic: Active Learning — Understand the implications of new information for both current and future problem-solving and decision-making. Active Listening — Give full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. Critical Thinking — Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. Learning Strategies — Select and using training/instructional methods and procedures appropriate for the situation when learning or teaching new things. Mathematics — Use mathematics to solve problems. Monitoring — Monitor/Assess performance of yourself, other individuals, or organizations to make improvements or take corrective action. Reading Comprehension — Understand written sentences and paragraphs in work-related documents. Science — Use scientific rules and methods to solve problems. Speaking — Talk to others to convey information effectively. Writing — Communicate effectively in writing as appropriate for the needs of the audience. Language — Able to read and write in English. 
Social: Coordination — Adjust actions in relation to others' actions. Instructing — Teach others how to do something. Negotiation — Bring others together and trying to reconcile differences. Persuasion — Persuade others to change their minds or behavior. Service Orientation — Look for ways to help people. Social Perceptiveness — Be aware of others' reactions and understanding why they react as they do.
Problem Solving/Decision-making: Complex Problem Solving — Identify complex problems and review related information to develop and evaluate options and implement solutions. Time pressure decision-making — Make decisions without much analysis or time to consider alternatives. 
Resource Management: Management of Material Resources — Obtain and see to the appropriate use of equipment, facilities, and materials needed to do certain work. Personal Time Management — Manage one's own time and the time of others. 
Technical: Operations Monitoring — Watch gauges, dials, or other indicators to make sure a machine is working properly. 
Proficient Computer Skills In: N/A 
Expert Computer Skills In: N/A 
MENTAL EFFORT/COGNITIVE ABILITIES REQUIRED: Memory — Remember information such as words, numbers, pictures, and procedures. Performance of job tasks rely on memorization of tasks or sequences of events. Consider amount and type of information. Number Facility — Add, subtract, multiply, or divide quickly and correctly. Oral Comprehension — Listen to and understand information and ideas presented through spoken words and sentences. Oral Expression — Communicate information and ideas in speaking so others will understand. Problem Sensitivity — Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing that there is a problem. Written Comprehension — Read and understand information and ideas presented in writing. Written Expression — Communicate information and ideas in writing so others will understand.
PHYSICAL REQUIREMENTS: Medium work. Exert up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.
 
PHYSICAL ACTIVITIES REQUIRED: Balancing — Maintain body equilibrium to prevent falling and walking, standing or crouching on narrow, slippery, or erratically moving surfaces. This factor is important if the amount of balancing exceeds that needed for ordinary locomotion and maintenance of body equilibrium. Stooping/Kneeling/Crouching/Crawling — Bend body downward and forward by bending spine at the waist. This factor is important if it occurs to a considerable degree and requires full motion of the lower extremities and back muscles. Bending legs at knee to come to a rest on knee or knees. Bending the body downward and forward by bending leg and spine. Crawling. Moving about on hands and knees or hands and feet.Reaching — Extend hand(s) and arm(s) in any direction. Lifting — Raise objects from a lower to a higher position or moving objects horizontally from position-to-position. This factor is important if it occurs to a considerable degree and requires substantial use of upper extremities and back muscles. Fingering/Grasping — Pick, pinch, type or otherwise work, primarily with fingers rather than with the whole hand as in handling. Applying pressure to an object with the fingers and palm. Feeling — Perceive attributes of objects, such as size, shape, temperature or texture by touching with skin, particularly that of fingertips. Standing — Particularly for sustained periods of time.Walking — Move about on foot to accomplish tasks, particularly for long distances or moving from one work site to another. Sitting — Particularly for sustained periods of time. Pushing — Use upper extremities to press against something with steady force in order to thrust forward, downward or outward. Pulling — Use upper extremities to exert force in order to draw, haul or tug objects in a sustained motion. Speech Clarity/Talking — Express or exchange ideas by means of the spoken word. Those activities in which they must convey detailed or important spoken instructions to other workers accurately, loudly, or quickly. Includes the ability to understand the speech of another person. Hearing — Perceive the nature of sounds at normal speaking levels with or without correction. Ability to receive detailed information through oral communication, and to make the discriminations in sound. Repetitive motion — Substantial movements (motions) of the wrists, hands, and/or fingers. Coordination, including eye/hand, hand/feet. Necessity to distinguish colors to perform job functions. Smell — Rely on smell to perform job functions safely.
VISUAL ACUITY: The worker is required to have visual acuity to determine the accuracy, neatness, and thoroughness of the work assigned or to make general observations of facilities or structures.
WORK CONTEXT/ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Subject to environmental conditions. Protection from weather conditions but not necessarily from temperature changes. Subject to exposure to diseases/infections or bodily functions (from contact with others). Subject to wearing common protective or safety equipment, including but not limited to safety shoes, glasses, gloves, hearing protection, hard hats, or other PPE deemed necessary to perform the job tasks safely.
Other PPE Required: Mask
VEHICLE RELATED REQUIREMENTS:
Access to reliable transportation to get to/from work: Required. 
Access to a reliable automobile: Not required, but preferred.
Must provide proof of auto liability insurance (and continue to while working in this position): Not required, but preferred.
Must possess a valid driver's license: Not required, but preferred.
Additional license requirements that are necessary: N/A
 
Drug Free Workplace:
Caritas Family Solutions is dedicated to maintaining a safe, healthy, and productive environment for our clients and employees. As part of this, a strict drug-free workplace policy is maintained.

Universal Service Worker (Part-Time)

<h3>Job Description</h3>
Job Description
Automation Project Engineer Princeton, IN&nbsp; $65,000 to $75,000 Bonus Job ID 28813 Perks: Excellent Benefits Bonus Long-term growth&nbsp; This company has experienced several decades of success. They have consistently grown, expanded, improved, and adapted. The company has a great reputation for how they treat their employees by providing career opportunities, respect, flexibility, and a great benefit package. Several employees spend their entire career with our client. They are looking to add on an engineer who wants to learn, grow, and contribute. The team gets involved with a lot of fun and different automation projects for a diverse customer base. As an Automation Project Engineer for this team, you will get involved with: Communicating with the manufacturing customers on their automation needs Troubleshooting&nbsp;and integrating PLCs, HMIs, PC controls, motion systems, and more Supporting the assembly of the systems and equipment Partnering with maintenance on a variety of electro-mechanical issues To be considered for this Automation Project Engineer position, you must have: A four or two-year engineering degree Knowledge of PLCs Knowledge of electrical and&nbsp;mechanical systems Self-directed; ability to lead projects Some travel might be required Please apply or send us a copy of your resume to&nbsp;<a href="mailto:dublin@omnione.com" target="_blank">dublin@omnione.com</a>. All of your information will be kept confidential. Please feel free to call us at&nbsp;614-760-5799.
Company DescriptionOmni One specializes in engineering, professional, and technical staffing (no cost to you!). We work with a broad range of engineers, manufacturing, and technical skilled applicants throughout the United States. We strive to help each applicant and client shape their future and reach their goals. 
<h3>Company Description</h3>
Omni One specializes in engineering, professional, and technical staffing (no cost to you!). We work with a broad range of engineers, manufacturing, and technical skilled applicants throughout the United States. We strive to help each applicant and client shape their future and reach their goals.

Automation Project Engineer

<h3>Job Description</h3>
Job DescriptionSalary: 
HMC Gears is growing, and we are looking for qualified CNC Machinists like you! Founded over 100 years ago,HMC is an international contender in the large gear manufacturing industry, complete with the most cutting edge CNC machine technology in the world that allows us to manufacture gearing up to 8 meters in diameter.Our invaluable CNC Machinists work with the most advanced technology to cut chips for some of the largest gears in the world. As a custom job shop, every day brings a diverse set of challenges and successes.
 
Responsibilities for our CNC Machinists include, but are not limited to:
<ul>
<li>Machine Setups</li>
<li>Programming on Machine Tools</li>
<li>Adjusting and reprogramming controls</li>
<li>Operate large CNC mills and lathes</li>
<li>Maintaining specifications, tolerances, and quality requirements when performing drilling, grooving, and cutting, turning, facing, knurling and thread chasing</li>
<li>Troubleshooting programming and process errors</li>
<li>Perform preventative maintenance for assigned machines </li>
<li>Calculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometers and calipers</li>
<li>Follow work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters, and interpreting geometric dimensions and tolerances (GD&amp;T)</li>
<li>Maintain specifications, tolerances, and quality requirements when performing drilling, grooving, and cutting, turning, facing, knurling and thread chasing, measurements, interpreting malfunctions, troubleshooting processes; adjusting and reprogramming controls, replacing worn tools; sharpening tools, and adhering to quality requirements, procedures, and processes</li>
</ul>
Qualifications
<ul>
<li>Associates Degree or Higher in CNC Machining; or</li>
<li>Three years of directly-related CNC machine work experience</li>
</ul>
Position Requirements
<ul>
<li>CNC Machining experience</li>
<li>Ability to basic math functions</li>
<li>Ability to read, write, and comprehend G and M code</li>
<li>Ability to read and understand blueprints</li>
<li>Must be mechanically inclined</li>
<li>Detail-oriented</li>
</ul>
 
Work Environment
This job is located in a climate-controlled machine shop and could be exposed to heat, cold, loud noises, and vibration. Responsibilities of this job require frequent walking, standing, lifting, reaching, and bending and frequent lifting, pushing, and pulling of objects up to 50lbs.There may be repetitive motions of the hands and wrists.
 
Candidates must be authorized to work in the U.S. and able to commute to Princeton, IN.
This is a permanent position with competitive wages and exceptional benefits including PTO, company paid holidays, health insurance, company paid dental insurance, group life/ short-term disability insurance, optional wellness program, retirement plan, and more. 
 
Currently enrolled in a precision machining program? HMC offers a competitive internship program for local high school and college students. Learn more about us by visiting our website at <a href="http://www.hmcgears.com" target="_blank">www.hmcgears.com</a>.

CNC Machinist

<h3>Job Description</h3>
Only USC, GC &amp; EAD'S
Overview:
We are seeking a skilled Industrial Automation Technician with strong experience in PLC programming and troubleshooting. This role requires hands-on expertise in electrical systems, industrial controls, and automation technologies. The ideal candidate is mechanically inclined, comfortable working in various environments, and open to travel.
Key Responsibilities:
<ul>
<li>Program and troubleshoot PLCs (Toyopuc, Siemens, Omron, Mitsubishi, Allen Bradley) – Minimum 2 years’ experience required</li>
<li>Diagnose and repair electrical circuits, motor starters, and hydraulic systems</li>
<li>Interpret mechanical and electrical schematics and drawings</li>
<li>Perform hands-on installations, maintenance, and repairs using hand and power tools</li>
<li>Travel domestically and internationally up to 50% of the time</li>
<li>Work overtime (up to 30%) when needed</li>
</ul>
Qualifications:
<ul>
<li>Associate degree in Electrical Engineering Technology, Industrial Maintenance, or a related field; or equivalent hands-on experience</li>
<li>Minimum 2 years of industrial maintenance experience</li>
</ul>

Controls/ Robotics Engineer

<h3>Job Description</h3>
Job Description
Champion Laboratories is hiring a MANUFACTURING ENGINEER to work on site at our plant located in Albion, IL.
The MANUFACTURING ENGINEER will assist by:
Principal Activities:
The Manufacturing Engineer reports to the Manager of Manufacturing Engineering, who reports to the Director of Manufacturing Services. The incumbent evaluates and/or proposes areas for improvement in manufacturing processes.
<ul>
<li>
Design equipment and processes to manufacture products in the most cost-effective manner.
</li>
<li>
Estimate project budgets and schedules accurately to ensure timely completion.
</li>
<li>
Provide technical assistance to other service and manufacturing departments within the company to support improvements and/or resolve issues with existing manufacturing processes and equipment.
</li>
<li>
Determine the practicality and cost-effectiveness of installing or modifying machinery and/or processes.
</li>
<li>
Collaborate with equipment suppliers, Product Engineering, and various manufacturing and service departments throughout the completion of a project.
</li>
</ul>
Preferred Requirements:
<ul>
<li>
Bachelor of Science degree in Engineering or equivalent education and experience.
</li>
<li>
1–3 years of experience in an engineering-related field.
</li>
<li>
Good working knowledge of machinery components and their functions.
</li>
<li>
General knowledge of PLC programming and logic circuits.
</li>
<li>
Strong mathematical background.
</li>
<li>
Proficiency in AutoCAD drawings.
</li>
<li>
Knowledge of machining principles and methods.
</li>
<li>
Drafting/sketching ability.
</li>
<li>
Strong project management skills.
</li>
</ul>
Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status.
Company DescriptionWe are a globally recognized automobile parts manufacturer. This company boasts a diverse product portfolio featuring leading national brands and is known for its best-in-class offerings and long-term customer relationships. 
<h3>Company Description</h3>
We are a globally recognized automobile parts manufacturer. This company boasts a diverse product portfolio featuring leading national brands and is known for its best-in-class offerings and long-term customer relationships.

Manufacturing Engineer

<h3>Job Description</h3>
Job Description
TRIGO Global Quality Solutions has several immediate openings for Quality Inspectors in Princeton, IN.
 
Overall Purpose of the Quality Inspector
Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. 
Reports to
Site Supervisor/Site Leaders
Responsibilities
(To include but not limited to the following)
Client Relationship &amp; Business Development
<ul>
<li>Act as an impartial third party between the production source and the customer facility to ensure the product meets set criteria</li>
</ul>
Operations
<ul>
<li>Check/inspect manufactured parts or products for defects</li>
<li>Read and follow work instructions and general processes</li>
<li>Use measuring or testing equipment as needed</li>
<li>Ensure products meet quality standards</li>
<li>Display excellent customer service </li>
<li>Must comply with local and company Health &amp; Safety legislation, laws, and policies</li>
</ul>
Organization &amp; Management
<ul>
<li>Collect and record data</li>
</ul>
Technical 
<ul>
<li>Utilize company portal for time recording and policy acknowledgements </li>
</ul>
Other
<ul>
<li>Any other duties as assigned</li>
</ul>
Knowledge, skills, abilities
Hard skills
<ul>
<li>Must be able to speak and read in the English language</li>
<li>Good communications skills</li>
<li>Must be able to multi-task</li>
<li>Ability to work in a fast-paced environment </li>
<li>Ability to handle sensitive and confidential material</li>
<li>Ability to walk and stand for long periods of time</li>
<li>Ability to bend, lift, twist and move freely</li>
<li>Ability to periodically lift/move up to 50 pounds</li>
<li>Must have reliable transportation </li>
</ul>
Values &amp; attitudes
Global team spirit
<ul>
<li>Team player</li>
<li>Caring for people</li>
<li>Open-minded</li>
</ul>
Excellence
<ul>
<li>Reactive</li>
<li>Resilient to pressure</li>
<li>Rigorous</li>
</ul>
Customer focus
<ul>
<li>Client oriented</li>
<li>Reliable &amp; trustworthy</li>
<li>Flexible</li>
</ul>
Initiative
<ul>
<li>Autonomous</li>
<li>Innovative</li>
<li>Daring</li>
</ul>
Work experience
Overall recommendations
<ul>
<li>No experience necessary </li>
<li>Ability to read blueprints a plus</li>
</ul>
Education background
Overall recommendations
<ul>
<li>High School Diploma or Equivalent recommended or comparable work experience</li>
</ul>
TRIGO16
About TRIGO Global Quality Solutions
Founded in 1997, TRIGO is a multinational company providing operational Quality Management solutions for the manufacturing sector, especially in the automotive and aerospace industries. With a team of more than ten thousand professionals present in 20+ countries across 4 continents, TRIGO offers a comprehensive portfolio of Quality Assurance services ranging from inspection to expert auditing, consulting and training.
The unrivaled expertise, industrial mindset and extensive global footprint that TRIGO has built up over the last 3 decades has made TRIGO the leading quality solutions provider using the latest innovative and reliable digital systems and standard processes, delivering results in the most demanding industries. TRIGO has recently started to expand its clientele by offering quality services to the medical, chemical and food industries.
TRIGO Global Quality Solutions is committed to the core values of equal employment opportunity. We are committed to treating people fairly, and with respect and dignity. We offer employment opportunities based upon an individual's qualifications and performance, free from discrimination or harassment because of race, ancestry, place of origin, ethnic origin, color, citizenship, creed, sex, sexual orientation, age, marital status, family status, and disability.
 Job Posted by ApplicantPro

19 Manufacturing Jobs in Lancaster, IL 62863, USA