field_job_occupational_field_parents_all

field_job_employment_type

job_organization_name

city

state

<h3>Job Description</h3>
Job DescriptionJob ID: TAP00039
Position: Senior FPGA Design Engineer
Location: US – MD, Fort Meade (or surrounding area)
Category: Hardware
Clearance Requirement: Active TS/SCI w/ full scope polygraph
Education Requirement: BS in Electrical or Computer Engineering (or related technical field)
Experience Requirement: 7 Years
TAP is seeking to hire a Senior FPGA Design Engineer to join our team! If you are a highly motivated engineer who enjoys a challenging and dynamic environment where your contributions are both critical and valued, this company will provide you the tools and opportunity to thrive.
The Senior FPGA Design Engineer will focus on FPGA Design, PCB design and layout, and reverse engineering, to include the analysis of integrated circuits for security, at both the macrocell/digital level, and the transistor/analog level.
Required Qualifications:
<ul>
<li>Active TS/SCI w/ full scope polygraph</li>
<li>BS in Electrical or Computer Engineering (or related technical field)</li>
<li>7+ Years of Experience</li>
<li>Experience designing New FPGAs and Hardware Components</li>
<li>Apply FPGA Place and Route (P&amp;R) tools with various libraries to create physical implementations of designs</li>
<li>Designing electrical components and systems, including schematic capture and routing layout for digital printed circuit boards (PCBs)</li>
<li>Technical writing, communication, and interpersonal skills</li>
</ul>
Desired Qualifications:
<ul>
<li>MS or PhD in Electrical or Computer Engineering (or related technical field)</li>
<li>Experience with ASIC Design, including experience with ASIC design tools such as Cadence or Synopsis or FPGA design tools such as Altera Quartus or Xilinx Vivado.</li>
<li>Experience in reverse engineering</li>
<li>Experience fabricating, assembling and qualifying 1st article engineering prototypes</li>
<li>Experience developing and executing test plans and procedures</li>
<li>Experience doing physical partitioning or analysis of the FPGA fabric</li>
<li>Experience providing subject matter expertise to those involved with the planning, acquisition and integration of new technologies procured and incorporated by the customer</li>
<li>Experience researching FPGA Assurance industry technology advances and trends, prepare and report findings, and make recommendations to customer decision makers</li>
</ul>
**This position is contingent upon the successful completion of security processing and favorable acceptance onto the program by the Customer.**&nbsp;
Clearance Requirement: This position requires ability to obtain and maintain a Top Secret/SCI security clearance, based on current background investigation (SBI), as well as the favorable completion of full scope polygraph. Clearance and polygraph processing will be completed by the U.S. Government. Factors considered for a U.S. Government Security Clearance include, but are not limited to:
<ul>
<li>U.S. Citizenship</li>
<li>Favorable Criminal History Check</li>
<li>Education Verification</li>
<li>Abuse/Illegal Drug Use</li>
<li>Credit Check</li>
<li>Subject Interview</li>
</ul>
By submitting your resume for this position, you understand and agree that TAP Engineering may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.&nbsp;
TAP Engineering is an Equal Opportunity Employer and applicants receive lawful consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.
Powered by JazzHR
XcTqYPofeH

Senior FPGA Design Engineer

<h3>Job Description</h3>
Job DescriptionSalary: 95,000-100,000 
About FusionICS, LLC
At Fusion,we specialize in mission-critical engineering, infrastructure, and IT solutions for federal and defense organizations. As a Service-Disabled Veteran-Owned Small Business (SDVOSB), we bring a commitment to excellence, security, and innovation to every project.
Our team of elite engineers and technical experts is dedicated topowering the future of secure facilities by providing cutting-edge engineering solutions. When you join Fusion, you become part of a company that valuestechnical expertise, collaboration, and a commitment to national security.
We look forward towelcoming you to our team and working together to support mission-critical operations across government and defense installations.
Position Summary:
FusionICS is seeking a skilled Electrical Engineer to support federal infrastructure and secure facility construction projects in the National Capital Region. This role requires in-depth expertise in designing, reviewing, and overseeing the installation of electrical systems in compliance with DoD, UFC, and NEC standards.
The ideal candidate will bring technical depth in power distribution, lighting, grounding, and control systems, along with experience in high-security, mission-critical environments.
Key Responsibilities:
<ul>
<li>Design, review, and approve electrical drawings and specifications for secure construction projects.</li>
<li>Oversee contractor execution of electrical work, ensuring adherence to design, budget, schedule, and safety.</li>
<li>Conduct field inspections and troubleshoot electrical system issues.</li>
<li>Ensure compliance with NEC, UFC, DoD, and other relevant codes and regulations.</li>
<li>Coordinate with architects, civil, and mechanical engineers during planning and implementation phases.</li>
<li>Support commissioning, acceptance testing, and red-line/as-built documentation.</li>
<li>Interface with federal clients, providing technical input and updates.</li>
<li>Participate in meetings, submittal reviews, and RFIs.</li>
<li>Maintain configuration control and change management in secure design documentation.</li>
</ul>
Qualifications &amp; Requirements:
Education &amp; Experience:
<ul>
<li>Bachelors degree in Electrical Engineering from an ABET-accredited institution.</li>
<li>Minimum 5 years of experience in electrical engineering, including design and field work. </li>
<li>Experience with DoD construction projects, military facilities, or government contracting preferred.</li>
</ul>
Certifications &amp; Technical Skills:
<ul>
<li>Strong knowledge of NEC, UFC, and government/federal construction specifications.</li>
<li>Proficient with AutoCAD, Revit, and/or BIM software.</li>
<li>Familiarity with power distribution, grounding, lighting, emergency systems, and controls.</li>
<li>Ability to produce sealed/stamped engineering drawings preferred.</li>
<li>Excellent communication and coordination skills.</li>
<li>Ability to work safely on active construction sites and wear required PPE. </li>
</ul>
Preferred Qualifications:
<ul>
<li>PE (Professional Engineer) license or EIT with intention to obtain PE.</li>
<li>Experience with SCIF/SAPF or high-security electrical systems.</li>
<li>Background in commissioning secure DoD/NIC projects or mission-critical infrastructure.</li>
<li>Experience with design-build project delivery.</li>
</ul>
Security Clearance Requirement:
<ul>
<li>Active Top Secret (TS) clearance required.</li>
<li>Must be able to obtain and maintain clearance at the necessary level for assigned duties.</li>
</ul>
Salary &amp; Benefits:
Compensation:
<ul>
<li>Base Salary: Competitive, based on experience and security clearance level.</li>
<li>Annual Review: Compensation is reviewed annually as part of FusionICS' performance and salary review process.</li>
</ul>
Benefits Package:
<ul>
<li>Medical &amp; Retirement Plans: Eligible to participate in medical insurance and 401(k) retirement plans with a 4% company match.</li>
<li>Paid Time Off: Employees accrue 120 hours (15 days) of vacation per year.</li>
<li>Sick Leave: Employees receive 5 days of sick leave per year.</li>
<li>Federal Holidays: FusionICS provides 11 paid holidays per year.</li>
</ul>
Work Conditions &amp; Physical Requirements:
<ul>
<li>Ability to work in high-security environments requiring strict access controls and security protocols.</li>
<li>Work in indoor and outdoor environments, including near high-voltage switchgear and substations.</li>
<li>Requires lifting/carrying up to 50 lbs, climbing ladders, and working in confined spaces.</li>
<li>Occasional travel to other sites or campuses as needed.</li>
</ul>

Electrical Engineer (TS Clearance)

<h3>Job Description</h3>
Job Description
CORPORATE SUMMARY
The Company
Beacon EmbeddedWorks is a full-service provider of embedded solutions. Its innovative System on Modules (SOMs) are backed by an extensive suite of customization, security, and support services and its dedicated team of experts provide in-house manufacturing and support to accelerate development and reduce risk.
All Beacon EmbeddedWorks SOMs are designed, manufactured, and supported in its US-based facility in Eden Prairie, MN. As dependable, pre-certified, and feature dense solutions, Beacon EmbeddedWorks SOMs serve the most strenuous applications, including medical, aerospace and defense, and industrial markets. Beacon EmbeddedWorks operates mostly in the US but also has a small customer base in continental Europe and the APAC.
Beacon EmbeddedWorks is part of the Design &amp; Manufacturing division of discoverIE Group plc, a British company listed on the main London stock exchange where it is a member of the FTSE 250 index.
What does joining Beacon mean for you?
<ul>
<li>We are a Top 200 Workplace as voted by our employees</li>
<li>Multiple options for medical and dental coverages</li>
<li>Paid life insurance and disability coverage</li>
<li>401k with match</li>
<li>128 hours of time off per year to start</li>
<li>Paid holidays</li>
<li>Working for a company that helps save lives with some of our products</li>
</ul>
POSITION SUMMARY
The Principal Hardware Engineer defines product requirements, translates requirements to implementable architecture, performs detailed design work, and ensures the end product is optimized for manufacturability.
Reports to: Senior Manager of Engineering
Location: Eden Prairie, MN office
Starting Salary Information: $130,000
Key Responsibilities: Supervisory Responsibilities
This role has no direct supervisory responsibilities but does serve as a coach and mentor for other positions in the department
Essential Duties &amp; Responsibilities:
<ul>
<li>Lead electrical design projects and contribute to electrical design best practices</li>
<li>Instruct, mentor, direct, and check the work of other design engineers</li>
<li>Translate product requirements into implementable architectures</li>
<li>Perform detailed electronic design of microprocessor-based platforms and related analog/digital circuits. This will include drawing of circuits themselves after basic analysis and paper design activity using a schematic CAD tool (Cadence OrCAD or Altium) along with simulation as appropriate using tools such as SPICE or HyperLynx.</li>
<li>Conduct design analysis on components and/or assemblies to assist in the development process by ensuring designs are cost efficient, manufacturable, customer focused, and reliable</li>
<li>Gather technical data and prepare technical documents such as design verification test reports, written rework instructions, PCB placement and routing guidelines and Analysis of Alternatives documents</li>
<li>Maintain organized history of design artifacts utilizing a version control system</li>
<li>Complete assigned engineering projects within budgetary and scheduling guidelines</li>
<li>Communicate with other engineers and may serve as a project manager to coordinate and assure project completion</li>
<li>Mentor other engineers as they work through day-to-day technical challenges</li>
<li>Assist or lead in preparing proposal documentation and integrate into customer specifications</li>
<li>Assist in preparing compliance reports for REACH, RoHS, PFAS etc.</li>
<li>Monitor for component obsolescence using Silicon Expert reports and finding suitable alternates</li>
<li>Assist in developing ECOs and route them for needed approvals.</li>
</ul>
Essential Responsibilities of all Beacon EmbeddedWorks employees
<ul>
<li>Support, demonstrate and drive our core values</li>
<li>
<ul>
<li>Lead, don't follow</li>
<li>Consistently deliver</li>
<li>Never stand still</li>
<li>Create relationships not transactions</li>
</ul>
</li>
<li>Interact positively and professionally with all employees and customers</li>
<li>Maintain reliable attendance</li>
<li>Perform work safely and adhere to all safety requirements</li>
<li>Complete required training as scheduled</li>
<li>Perform other duties as assigned</li>
</ul>
Job Qualifications
Required Qualifications:
<ul>
<li>Bachelor of Science in Electrical Engineering, Computer Engineering or equivalent</li>
<li>15+ years of experience in product design</li>
<li>Experience with embedded systems and microprocessor-based design</li>
<li>Experience with functional aspects of product design including understanding of requirements, general electrical design analysis and documentation creation, design for manufacturing/design for test, and design verification</li>
<li>Experience with leading teams including engineers from multiple engineering disciplines</li>
<li>Working knowledge of oscilloscopes, logic analyzers, spectrum analyzers and vector network analyzers</li>
<li>Protocol-level knowledge of serial interfaces including SPI, I2C and UART</li>
<li>Experience with analog design concepts and design tools such as SPICE and HyperLynx preferred</li>
<li>Experience with RF communications such as Bluetooth, Wi-Fi (802.11), and cellular</li>
<li>Experience with high-speed digital interfaces such as DDR, PCIe, SATA, etc. preferred</li>
<li>Experience in medical device design or other regulated industries preferred</li>
<li>Experience with MS Office products including MS Project</li>
<li>Ability to work with both internal and external (customer) resources</li>
<li>Ability to analyze customer requirements for feasibility, cost and development timeline</li>
<li>Strong communication skills including the ability to write technical specifications and design documentation, create and author templates for engineering documents, create project proposals with technical details, present verbally in one-on-one or group settings</li>
<li>Able to work in a fast-paced environment with quickly changing priorities to ensure superior customer satisfaction</li>
</ul>
Other Considerations
Physical Demands
The physical demands and work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
<ul>
<li>While performing the duties of this job, the employee is regularly required to use hands and fingers to handle, feel, or operate objects, tools or controls, and reach with hands and arms</li>
<li>Specific vision abilities required by this job include close vision, and ability to adjust focus</li>
<li>The employee may occasionally lift and/or move up to 10 pounds</li>
</ul>
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
<ul>
<li>The noise level in the manufacturing area is moderate</li>
<li>The noise level in the manufacturing area is moderate</li>
<li>Travel is infrequent</li>
</ul>
Position Type/Expected Hours of Work
<ul>
<li>This is a full-time, on-site position</li>
<li>Typical days and hours of work are Monday through Friday, 8am -5pm, but does allow for some flexibility</li>
<li>It may be necessary to work more than 40 hours per week at times to produce the required results</li>
</ul>
Work Authorization
<ul>
<li>The candidate must meet the definition of “US Person” under ITAR/EAR regulations</li>
</ul>
Beacon EmbeddedWorks is an Equal Employment Opportunity and Affirmative Action Employer
Please note: This position is not eligible for external recruiter or agency placement and is not open to placement remuneration of any kind. All applications must be submitted directly by the candidate, free from external representation, to be considered for the position.
Salary Description
$130,000 starting salary

Principal Electrical Engineer

<h3>Job Description</h3>
Job Description
Since 1996, RQ Construction, LLC has been a leading provider of commercial and governmental Design-Build services. With a national presence and a focus on fast-track projects, we specialize in new commercial construction for both public and private clients, particularly within the Department of Defense sector. Our current projects span coast to coast, including significant work at Kings Bay Naval Submarine Base in Georgia.
Position Summary We are seeking experienced Mechanical &amp; Piping Insulators to join our self-perform team for ongoing work at Kings Bay Naval Submarine Base. This role involves applying insulating materials to mechanical systems, ductwork, and piping to control and maintain temperature, ensuring compliance with relevant codes and safety standards.
Pay: $30-45 per hour
Benefits: Medical, Dental, Vision, 401K with match
Key Responsibilities
<ul>
<li>
Apply insulating materials to mechanical systems, ductwork, and piping to control and maintain temperature
</li>
<li>
Utilize appropriate equipment and techniques to ensure efficiency and safety
</li>
<li>
Collaborate with team members to meet project milestones and quality standards
</li>
<li>
Adhere to all safety protocols and implement best practices in support of RQ Construction's Mission, Vision, and Values
</li>
</ul>
Education &amp; Experience Requirements
<ul>
<li>
High school diploma or G.E.D. is the minimum education required
</li>
<li>
Completion of a Union, private (in-house), military, or trade school apprenticeship program preferred
</li>
<li>
4 or more years of field or trade work experience as a journey-level mechanical piping insulator in a commercial, or facilities operations setting; government, military, or large commercial construction experience preferred.
</li>
</ul>
Compensation &amp; Benefits
<ul>
<li>
Competitive hourly rates, commensurate with experience.
</li>
<li>
Comprehensive benefits package, including medical, dental, vision, and 401(k) with company match
</li>
<li>
All work is performed on the military base and is paid the required Davis-Bacon prevailing wage specific to the Kings Bay military base
</li>
</ul>
Why Join RQ Construction?
<ul>
<li>
National Presence: Work on high-impact projects across the United States, including significant military installations.
</li>
<li>
Career Growth: Opportunities for skill development and advancement within a growing company.
</li>
<li>
Commitment to Excellence: Be part of a team dedicated to delivering quality and safety in every project.
</li>
</ul>
RQ Construction, LLC is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, gender (including gender identity and gender expression), religion (all aspects of religious beliefs, observance or practice, including religious dress or grooming practices) marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition (including cancer or a record or history of cancer, and genetic characteristics), sex (including pregnancy, childbirth, breastfeeding or related medical condition), genetic information, sexual orientation, veteran status, or any other basis or status protected by federal, state, or local law or ordinance or regulation.
 
All candidates considered for hire must provide evidence of identity and U.S. work authorization at the time of hire. Additionally, all candidates must successfully pass a drug screening and commercial criminal background check, including a stricter Department of Defense background check, for access to job site at military base (if applicable for position being hired for).
 Job Posted by ApplicantPro

Mechanical and Piping Insulator

<h3>Job Description</h3>
Job Description
Since 1996, RQC, LLC. has been a leading player in the commercial and governmental Design-Build economy. We now have a national presence with current projects, spanning coast to coast, including North Carolina. We offer management of projects throughout the United States, with our field operations team members who work on location for each of our projects. We specialize in fast-track projects in new commercial construction for both public and private clients, with a primary focus in the Department of Defense market.
We are looking to hire several Sheet Metal Installers to join our self-perform team for ongoing work on Camp Lejeune, NC. 
Our Sheet Metal Installers will be responsible for the fabrication and installation of ductwork, air distribution, and HVAC equipment on an active construction site, ensuring that work is done in accordance with relevant codes. Work involves technical application of mechanical principles. This is all to be done using the appropriate equipment and implementing the required safety practices in support of RQ's Mission, Vision, and Values. 
Pay: $20.00 - 38.00 per hour
Benefits: Medical, Dental, Vision, 401(K) with Match
Requirements for this position include:
<ul>
<li>A high school diploma or G.E.D. is the minimum education required for this position.</li>
<li>4 or more years (or equivalent) field or trade work experience as a journey-level sheet metal worker in a commercial, industrial, or facilities operations setting is required; government, military, or large commercial construction experience preferred. </li>
</ul>
COMPANY PROFILE: RQC, LLC is a full-service contracting and design firm that specializes in Design/Build projects for both public and private clients, with a primary focus on the Department of Defense. Our mission is to provide our customers with the best built environment while being the first choice of all stakeholders.
We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, creed, gender (including gender identity and gender expression), religion (all aspects of religious beliefs, observance or practice, including religious dress or grooming practices) marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition (including cancer or a record or history of cancer, and genetic characteristics), sex (including pregnancy, childbirth, breastfeeding or related medical condition), genetic information, sexual orientation, veteran status, or any other basis or status protected by federal, state, or local law or ordinance or regulation.
 
All candidates considered for hire must provide evidence of identity and U.S. work authorization at the time of hire. Additionally, all candidates must successfully pass a drug screening and commercial criminal background check, including a stricter Department of Defense background check, for access to job site at military base (if applicable for position being hired for).
 Job Posted by ApplicantPro

Sheet Metal Installer

<h3>Job Description</h3>
Job Description Build what powers clean energy
At Westinghouse, our purpose is clear: deliver safe, clean, and efficient nuclear energy worldwide. Join a diverse, collaborative community that values Safety and Quality, Integrity and Trust, Customer Focus and Innovation, Speed and Passion to Win, and Teamwork and Accountability.
 Role snapshot
<ul>
<li>Title: Power Systems Design Engineer — Nuclear Projects (mid-level)</li>
<li>Location: Cranberry Township, PA</li>
<li>Work model: Hybrid</li>
<li>Reports to: Manager, Large Project Electrical Systems &amp; Equipment</li>
</ul>
 What you will do
<ul>
<li>Apply intermediate-level engineering knowledge to design and analyze electrical systems for nuclear products and projects.</li>
<li>Develop electrical system designs, I&amp;C design packages, and system wiring documents.</li>
<li>Create engineering design documentation including technical evaluations, obsolete parts equivalencies, calculations, and specifications to support operating plants.</li>
<li>Use ETAP, Mathcad, Maximo, or similar software to model systems, complete calculations, and manage work.</li>
<li>Partner with internal engineering teams to gather inputs and align on solutions.</li>
<li>Engage with client and site personnel to resolve issues critical to project success.</li>
<li>Plan and manage your schedule to meet assignment milestones and deliverables.</li>
</ul>
 Qualifications
<ul>
<li>Bachelor’s degree or higher in Electrical Engineering.</li>
<li>3+ years of professional experience.</li>
<li>Demonstrated knowledge of power plant systems and equipment.</li>
<li>Experience on power projects.</li>
<li>Background creating procurement specifications for a variety of electrical commodities and reviewing vendor proposals.</li>
</ul>
 Compensation &amp; work model
We are committed to transparency and equity in all of our people practices. The base salary range for this position, which is dependent upon experience, qualifications and skills, is estimated to be $69,200 to $86,500 per year. Relocation assistance is not available for this role.
 Benefits
<ul>
<li>Competitive Salary</li>
<li>Comprehensive Health, Wellness and Income Protection Benefits</li>
<li>Employee Assistance Program: confidential counseling and resources for employees, eligible dependents, and household members</li>
<li>401(k) Savings Plan with Company Match</li>
<li>Paid Vacations and Holidays</li>
<li>Opportunities for Flexible Work Arrangements</li>
<li>Educational Reimbursement Program</li>
<li>Employee Referral Program</li>
</ul>
 About Westinghouse
Westinghouse Electric Company is the global nuclear energy industry’s first choice for safe, clean, and efficient energy solutions. While our Global Headquarters are located in Cranberry Township, PA, we have over 11,000 employees working at locations in 19 different countries. You can learn more by visiting <a href="http://www.westinghousenuclear.com" target="_blank">http://www.westinghousenuclear.com</a>.
 Tools &amp; proficiencies
<ul>
<li>ETAP, Mathcad, Maximo (or equivalent)</li>
<li>Electrical Schematics</li>
<li>Electrical / Electronic Systems</li>
<li>Engineering Degree</li>
</ul>
 Stay connected
Get connected with Westinghouse on social media:
Twitter|Facebook|LinkedIn|YouTube
 Legal
The following is included exactly as in the original:
Westinghouse is an Equal Opportunity Employer including Veterans and Individuals with Disabilities

Power Systems Design Engineer -- Nuclear Projects

<h3>Job Description</h3>
Job DescriptionCentury West Engineering, a premier Northwest engineering consulting firm, is looking for an Electrical Engineer to join our team. As an Electrical Project Engineer, you will work on a variety of municipal projects including public and private projects involving water systems, wastewater systems, street improvements, and park improvements. The qualified candidate will provide excellence in the design of electrical systems and integrate these designs to deliver a combined package. We are looking for a candidate who enjoys problem solving, working smart and hard on important projects, in collaborative teams with multiple stakeholders, and who has a proven record of getting results. This position will report to the Electrical Department Manager and may be located in our Coeur d’Alene, Idaho, Spokane, Washington, or Sandpoint, Idaho offices. Benefits:
<ul>
<li>2 to 4 weeks of vacation depending on experience</li>
<li>1 hour of sick leave for every 30 hours worked</li>
<li>8 paid holidays</li>
<li>3 days paid bereavement leave, as needed</li>
<li>401k retirement account match</li>
<li>Health (PPO and HSA options), dental, and vision insurance fully covered for full-time employees and available for family and dependents</li>
<li>Life and disability insurance</li>
<li>Employee assistance program</li>
<li>Bonus program</li>
<li>Professional training and development opportunities</li>
<li>Reimbursement for continuing education</li>
<li>Flexible schedule</li>
</ul>
Duties and Responsibilities:
<ul>
<li>Develop electrical site plans, electrical plan drawings, lighting plan drawings, one-line diagrams, wiring diagrams, network diagrams, electrical equipment layout and elevation drawings, electrical schedules, P&amp;IDs, and prepare electrical specifications</li>
<li>Prepare and review electrical construction cost estimates</li>
<li>Coordinate with and review design work from other engineers and technicians</li>
<li>Provide submittal reviews and electrical construction oversite</li>
<li>Review project scope and estimates</li>
<li>Track and adhere to project scope and budget</li>
</ul>
Qualifications:
<ul>
<li>Bachelor’s degree in electrical engineering or appropriate discipline</li>
<li>Professional Electrical Engineer in Idaho or Washinton, or ability to apply for reciprocity</li>
<li>Have 4+ years of relevant experience in power systems, lighting, and control systems</li>
<li>Proficient with Microsoft Office Suite, Adobe Acrobat, and Bluebeam Revu</li>
<li>Experience with design/knowledge related to PLCs, MCCs, VFDs, Standby Power Systems, and SCADA systems preferred</li>
<li>Experience with power analysis software (ETAP, SKM, EasyPower) and lighting analysis software (Visual, Agi32) preferred</li>
</ul>
 An Equal Opportunity Employer – All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected status.

Electrical Engineer

<h3>Job Description</h3>
Job Description
Since 1996, RQC, LLC. has been a leading player in the commercial and governmental Design-Build economy. We now have a national presence with current projects, spanning coast to coast. We offer management of projects throughout the United States, with our field operations team members who work on location for each of our projects. We specialize in fast-track projects in new commercial construction for both public and private clients, with a primary focus on the Department of Defense market.
Pay Range: $18.62 - 44.00 per hour DOE
Benefits: Medical, Dental, Vision, 401K with Match, 1 week vacation and sick time.
We are looking to hire several Sheet Metal Workers/Installers to join our self-perform team for ongoing work at Kings Bay Naval Submarine Base, GA and the surrounding area. All work is to be performed on the military base and is paid the required Davis-Bacon prevailing wage, specific to the base.
Our Sheet Metal Workers/Installers will be responsible for the fabrication and installation of ductwork, air distribution, and HVAC equipment on an active construction site, ensuring that work is done in accordance with relevant codes. Work involves the technical application of mechanical principles. This is all to be done using the appropriate equipment and implementing the required safety practices in support of RQ's Mission, Vision, and Values. Requirements for this position include:
<ul>
<li>High school diploma or G.E.D. is the minimal education required for this position</li>
<li>4 or more years (or equivalent) field or trade work experience as a journey-level sheet metal worker in a commercial, or facilities operations setting is required; government, military, or large commercial/industrial construction experience preferred</li>
<li>Experience in High Bay areas and work with turning veins experience preferred</li>
<li>Extensive rigging experience preferred</li>
<li>Hoisting Certifications preferred</li>
<li>Per contract stipulations, access to SUBASE Kings Bay is limited to United States citizens only. Other work statuses cannot be considered for employment at this specific location.</li>
</ul>
COMPANY PROFILE: RQC, LLC is a full-service contracting and design firm that specializes in Design/Build projects for both public and private clients, with a primary focus on the Department of Defense. Our mission is 'to provide our customers the best-built environment while being the first choice of all stakeholders.
We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, creed, gender (including gender identity and gender expression), religion (all aspects of religious beliefs, observance or practice, including religious dress or grooming practices) marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition (including cancer or a record or history of cancer, and genetic characteristics), sex (including pregnancy, childbirth, breastfeeding or related medical condition), genetic information, sexual orientation, veteran status, or any other basis or status protected by federal, state, or local law or ordinance or regulation.
 
All candidates considered for hire must provide evidence of identity and U.S. work authorization at the time of hire. Additionally, all candidates must successfully pass a drug screening and commercial criminal background check, including a stricter Department of Defense background check, for access to job site at military base (if applicable for position being hired for).
 Job Posted by ApplicantPro

<h3>Job Description</h3>
Job Description
Industrial Designer
Schedule: Monday - Friday onsite (Friday being optional remote) Our Industrial Design team brings together visionary designers and innovators dedicated to creating mobility solutions that serve everyone. Our team designs from the ground up—developing autonomous robotaxi vehicles and hardware that balance beauty, functionality, and social impact. We believe thoughtful design can transform not just individual experiences, but entire communities and generations. Join us in shaping the future of autonomous mobility, where every design decision reflects our commitment to beauty, innovation, and enjoyment. 
We're seeking a talented automotive designer whose passion and expertise will drive innovation across both traditional automotive and cutting-edge autonomous vehicle design challenges. Your unique design perspective, experience in automotive design, and commitment to our vision of revolutionizing mobility will be essential as we shape the future of transportation. You’ll bring a distinctive design vision that challenges conventions, strong collaborative skills, and a meticulous eye for detail that ensures excellence in every design decision. Join our design team as we embark on the next chapter of our vehicle and hardware design, where you'll contribute to groundbreaking projects that blend traditional automotive craftsmanship with the unique requirements of autonomous vehicles, helping us create transportation solutions for the benefit of all.
Responsibilities
<ul>
<li>Develop design themes for our vehicle and hardware products from sketch, prototype, through production</li>
<li>Work closely and collaborate with cross-functional teams to deliver completed, on time, and high-quality vehicle and hardware designs</li>
<li>Create high-quality digital and physical presentation materials that communicate the design intent at any phase in a project and present design concepts to internal teams and executives</li>
<li>Contribute to the evolving teamwork, design culture, and processes in the studio</li>
<li>Create product designs that align with our vision and brand</li>
</ul>
Requirements
Qualifications
<ul>
<li>5+ years of Automotive or similar design studio experience</li>
<li>Mass production, concept, and one-off vehicle or similar product launch experience</li>
<li>Experience managing design projects and processes from concept to production</li>
<li>Ability and desire to work and communicate well with internal, cross-functional, and executive teams</li>
<li>Hands-on experience and collaboration with industry vendors and suppliers</li>
<li>Experience working across partner groups such as engineering, product and manufacturing</li>
<li>Basic Autodesk Alias modeling skills</li>
<li>Experience with autonomous driving hardware and sensors is a plus</li>
</ul>
Benefits
<ul>
<li>Salary: $95K - 105K</li>
<li>Private Health Insurance</li>
<li>Paid Time Off</li>
</ul>

Industrial Designer

<h3>Job Description</h3>
Job DescriptionJob Title: Process Technician (Weekend Shifts)
Client in unable to provide visa sponsorship now or in the future. 
Job Description
As a Process Technician, you will collaborate closely with Process/Project Engineering, Tool Engineering, and Production teams to facilitate new product launches on the production floor. Your role will also involve investigating and developing solutions for ongoing issues in existing processes. This position requires hands-on technical support on the production floor for a significant portion of your time.
Responsibilities
<ul>
<li>Provide process operations support with hands-on troubleshooting and development.</li>
<li>Assist in process optimization.</li>
<li>Analyze data to improve process tool and process quality.</li>
<li>Verify manufacturing standards, comparing actual versus estimated performance.</li>
<li>Conduct process capability and uptime studies to meet pre-determined goals before formal handoff to manufacturing.</li>
<li>Assist the Maintenance Team with recurring machine problems.</li>
<li>Implement continuous improvement, cost reduction, and safety projects.</li>
<li>Research and conduct trials on supplies and consumables to enhance cost-effectiveness and quality.</li>
<li>Investigate and coordinate tooling improvements, repairs, and replacements.</li>
<li>Monitor standard tooling inventories to ensure adequate stock levels.</li>
<li>Facilitate initial manufacturing review of setup books and coordinate ongoing updates.</li>
<li>Program BLM tube lasers and 5 Axis lasers, providing support for laser-related manufacturing issues.</li>
<li>Program material handling and welding robots.</li>
<li>Offer technical support and problem-solving expertise to the manufacturing team.</li>
</ul>
Essential Skills
<ul>
<li>Troubleshooting</li>
<li>Process engineering</li>
<li>Process improvement</li>
<li>Equipment operation</li>
<li>Experience as a Process Engineering Technician</li>
<li>Welding knowledge</li>
<li>Metal forming or metal processing experience</li>
</ul>
Additional Skills &amp; Qualifications
<ul>
<li>High School diploma or equivalent</li>
<li>2 years of experience as a Process Technician</li>
<li>Understanding of metal forming or fabrication</li>
</ul>
Work Environment
Join a growing department where you have the potential to quickly become a leader. Enjoy a vibrant culture with monthly cookouts and events, all within an air-conditioned environment. Opportunities for growth and promotion are available, with the possibility to apply for other roles and shifts as they become available. Pay raises are offered after a six-month evaluation. Work schedules include weekend nights from Friday to Sunday, 6 PM to 6 AM, or weekend days from 6 AM to 6 PM.
Job Type &amp; Location
This is a Contract to Hire position based out of Shelbyville, KY.
Pay and Benefits
The pay range for this position is $26.00 - $30.50/hr.
Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental &amp; vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)
Workplace Type
This is a fully onsite position in Shelbyville,KY.
Application Deadline
This position is anticipated to close on Jan 9, 2026.
About Actalent
Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500.
The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email <a href="mailto:actalentaccommodation@actalentservices.com" target="_blank">actalentaccommodation@actalentservices.com</a> for other accommodation options.

7,808 Manufacturing Jobs in Iowa