<h3>Job Description</h3>
Job DescriptionSalary: 
PLCs Plus International is seeking an Instrumentation Technician for our Midland Texas operations

Position Summary

TheInstrumentation Technician reports directly to the I&amp;E staff and is responsible for testing and commissioning all control system components and loops as directed. Duties include, but are not limited to:
<ul>
<li>Assisting in planning as required</li>
<li>Calibration and maintenance of mechanical, pneumatic, chemical, electrical and electronic process controls and measurement instrumentation to approved procedure</li>
<li>Understand, evaluate, and execute tests and procedures properly </li>
<li>Safely and efficiently execute daily tasks related to calibration and instrumentation activities</li>
<li>Develop and improve maintenance procedures</li>
<li>Install, maintain, repair, overhaul, calibrate and test a wide variety of industrial instrumentation such as control valves, transmitters, radars, levels, controlling and regulating level, flow, pressure and temperature meters</li>
<li>Execute preventative maintenance inspections on all instrumentation equipment</li>
<li>Interpret, evaluate and document calibration test results</li>
<li>Ensures that there is adequate data sheets and system documentation to complete all required pre-commissioning and commissioning checks and tests</li>
<li>Verifies all test equipment is NIST Traceable and has a current calibration date</li>
<li>Utilizes industry standards for testing such as ISA or another recognized and approved standard</li>
<li>Completes Red lines and B check sheets as required</li>
</ul>
Required Minimum Qualifications (Techs):
<ul>
<li>High School Diploma, or Equivalent</li>
<li>Valid Drivers License with clean driving record</li>
<li>Five (5) years experience as Instrumentation Technician in oilfield, preferred</li>
</ul>
Required Education, Training and Certificates:
<ul>
<li>OSHA 10, or ability to obtain upon hire</li>
<li>H2S, or ability to obtain upon hire</li>
</ul>
Required Knowledge, Skills &amp; Abilities:
<ul>
<li>Ability to work in a team environment</li>
<li>Ability and willingness to receive and follow direction</li>
<li>Ability to clearly communicate, both verbal and written</li>
<li>Ability to work safely, and recognize potential hazards</li>
<li>Ability to legally operate a motor vehicle</li>
<li>Ability to recognize and respond to dangerous situations or emergencies such as high voltage systems, electrical fires, loose hot wires, broken power lines, etc. This position will be working with 50 volts or less. No high voltage repair or firefighting is within job responsibilities</li>
<li>Ability to diagnose system malfunction, locate cause of breakdown and correct the problem or recommend solution</li>
<li>Ability to set and balance priorities in order to complete projects on time</li>
<li>Ability to make decisions and recommend appropriate course of action in difficult situations</li>
<li>Ability to handle stress and possess positive trait even in difficult or challenging situations</li>
</ul>
Instrumentation Technician Specific Skillsets:
<ul>
<li>Comprehensive knowledge of control systems, equipment, operational and mechanical systems including; installation, testing, maintenance, and repair</li>
<li>Knowledge of applicable codes, standards, and regulations</li>
<li>Working knowledge of AC and DC control circuits</li>
</ul>
About this company
PLCs Plus, is an industry leader in Programmable Logic Controllers (PLC), Human Machine Interface (HMI), and Supervisory Control and Data Acquisition (SCADA). Our services span the control systems spectrum, from end-device to the corporate database
We specialize in:
<ul>
<li>HMI and SCADA architecture and system design</li>
</ul>
<ul>
<li>PLC &amp; DCS layout, system design, and configuration</li>
</ul>
<ul>
<li>PLC programming</li>
</ul>
<ul>
<li>HMI application development</li>
</ul>
<ul>
<li>Database solutions</li>
</ul>
<ul>
<li>Preventative maintenance</li>
</ul>
<ul>
<li>Specialty applications</li>
</ul>

PLC's Plus prides itself in the ability to provide Competitive salaries, Vacation, Health, Life, Disability, Dental, Vision, 401K and 125 and training

Opportunity:
PLCs Plus has solidified its reputation with great clients in the Permian Basin. West Texas has a tremendous amount of opportunity for growth and career development. You truly have the chance to have the American Dream and true job satisfaction. There is a lot of work that shows no sign of slowing. We would love for you to be a part of team PLCs Plus and take the opportunities that are available in this burgeoning market.

Physical Demand/Work Environment:
The physical demands described here are representative of those that must be met by the incumbent to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the incumbent is regularly required to talk, hear, and see. The incumbent frequently is required to stand, stoop, kneel, crouch, climb, balance and walk. The incumbent is occasionally required to sit. The incumbent must frequently lift and/or move up to 50 pounds and push/pull up to 100 pounds. Visual Acuity: must be adequate to perform all required Job Description tasks in a safe manner. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually loud and may require use of ear plugs on occasion. Work is usually done outside at a job site/field site that may have inclement weather conditions. The incumbent will be required to drive / travel to many locations within the Permian Basin. The incumbent is exposed to moving mechanical parts, vehicles and equipment.

Disclaimer:
The above job description covers the principal duties and responsibilities of the job. The description shall not however, be construed as a complete job listing of all duties, which may be required from day-to-day

Instrumentation Technician

<h3>Job Description</h3>
Job DescriptionSalary: 
We are seeking a highly skilled and experiencedMechanical Designerwith a strong background inHVAC system designfor commercial and institutional projects. The ideal candidate will be responsible for creating detailed mechanical designs, performing system calculations, and coordinating with multidisciplinary teams to ensure project success from concept through construction.

Key Responsibilities:
<ul>
<li>Design and develop HVAC systems including heating, ventilation, air conditioning, and exhaust systems for buildings</li>
<li>Prepare layout drawings, schematics, and detailed mechanical plans using AutoCAD or Revit</li>
<li>Ensure designs comply with applicable codes (ASHRAE, IMC, NEC), standards, and project specifications</li>
<li>Collaborate with architects, engineers, and project managers to ensure coordination and integration with other building systems</li>
<li>Conduct site surveys and assessments to collect data for renovation or retrofit projects</li>
<li>Assist in the preparation of construction documents, specifications, and cost estimates</li>
<li>Review submittals and respond to RFIs during the construction phase</li>
<li>Mentor junior staff and contribute to team development and technical growth</li>
</ul>

Requirements:
<ul>
<li>Minimum of 5 years of HVAC design experience in a consulting or engineering firm</li>
<li>Proficiency in AutoCAD, Revit MEP, and HVAC design software</li>
<li>Strong knowledge of mechanical codes, standards, and best practices</li>
<li>Ability to manage multiple projects and deadlines effectively</li>
<li>Excellent communication and interpersonal skills</li>
</ul>

Preferred Qualifications:
<ul>
<li>Experience with fire protection and plumbing systems</li>
<li>Familiarity with building commissioning processes</li>
</ul>

Mechanical Designer

<h3>Job Description</h3>
Job DescriptionSalary: $15-$19 
PFP Logistics Est Contratando! Asociados de Almacn (Carga/Descarga) | Medley, FL
 
Horario y Pago
<ul>
<li>Lunes Viernes (Sbados disponibles)</li>
<li>3:00 PM 11:00 PM (hasta completar el trabajo)</li>
<li>Pago por Produccin: Pago por tarea completada* (Promedio de $15 $19 por hora)</li>
<li>Pago semanal</li>
</ul>
Responsabilidades Principales
<ul>
<li>Descargar contenedores y reacomodar tarimas</li>
<li>Levantar, apilar y organizar productos</li>
<li>Mantener la limpieza y estndares de seguridad en el almacn</li>
<li>Seguir los procedimientos de manejo en fro y polticas de la empresa</li>
<li>Asegurar la recepcin, almacenamiento y envo exacto de mercanca</li>
</ul>
Requisitos Fsicos / Ambiente de Trabajo
<ul>
<li>Comodidad trabajando en almacn de fro</li>
<li>Capacidad de levantar hasta 70 lbs de manera constante</li>
<li>Trabajo rpido y fsicamente exigente</li>
<li>Transporte confiable y medio de contacto requerido</li>
<li>Experiencia previa en almacn es un plus (no requerida)</li>
</ul>
Lo Que Valoramos
<ul>
<li>Integridad: Hacer lo correcto</li>
<li>Calidad: Seguir el proceso de manera consistente</li>
<li>Liderazgo: Dar el ejemplo en todo momento</li>
<li>Rendimiento: Mejorar continuamente</li>
<li>Equilibrio: Apoyar el bienestar integral de la persona</li>
</ul>
Empleador de Igualdad de Oportunidades PFP Logistics valora la diversidad y es un Empleador de Igualdad de Oportunidades. Todos los solicitantes calificados son considerados sin importar raza, color, religin, sexo, orientacin sexual, identidad de gnero, origen nacional, estatus de veterano o condicin de discapacidad.

Segundo Turno: Cargador/Descargador de Almacn

<h3>Job Description</h3>
Job DescriptionSalary: 
Air Controls - Billings, Inc,Montanas premier HVAC, Plumbing, Stainless Steel, and Refrigeration Service provider is looking for a skilledFabrication Shop Managerto lead the daily operations of our busy fabrication shop.
This is a great opportunity for someone whos detail-oriented, a strong communicator, and ready to manage people, processes, and tools to drive efficiency, safety, and high-quality output.
 
Job Summary:
TheFabrication Shop Manageroversees day-to-day operations in the fabrication shop, focusing on quality control, safety, and operational efficiency. This role serves as a key connection between the shop, field crews, and office teamsensuring seamless communication, streamlined workflows, and on-time project delivery. The ideal candidate will lead continuous improvement efforts and maintain high performance standards across the shop.
 
Key Responsibilities:
<ul>
<li>Plan, schedule, and prioritize fabrication shop jobs to meet production timelines</li>
<li>Oversee the use, maintenance, and inventory of shop tools, equipment, and materials</li>
<li>Lead, train, and support the development of fabrication shop staff</li>
<li>Ensure compliance with all safety protocols and HVAC industry standards</li>
<li>Monitor job progress and productivity using shop management software</li>
<li>Collaborate with field teams, project managers, and office staff to streamline workflows</li>
<li>Maintain accurate documentation and support ongoing training and technology improvements</li>
</ul>
 
Qualifications:
<ul>
<li>5+ years of experience in a management role, preferably within the HVAC or fabrication industry</li>
<li>High school diploma or equivalent required; vocational training a plus</li>
<li>Strong leadership, communication, and problem-solving abilities</li>
<li>Familiarity with HVAC systems and fabrication processes preferred</li>
<li>Proficient in: Bluebeam, Trimble FabShop, Procore, PPI Burn Table Software, and any shop management software</li>
</ul>
 
Physical demands and abilities
<ul>
<li>Regularly lift/move objects up to 70 lbs.; occasionally over 100 lbs.</li>
<li>Frequent standing, walking, and bending</li>
<li>Able to work in confined or elevated spaces as needed</li>
<li>Safely operate shop machinery and equipment in a fast-paced environment</li>
</ul>
 
What We Offer: 
<ul>
<li>Competitive salary</li>
<li>Free Medical, Dental, and Vision Insurance for employees and their dependents</li>
<li>Retirement Plans Available through Union Signatories</li>
<li>Supportive team environment fostering collaboration and growth</li>
<li>Training and professional development opportunities</li>
<li>Time off benefit program to support work-life balance</li>
<li>Wellness Program promoting health and well-being</li>
<li>Overtime pay and profit-sharing incentives</li>
</ul>

Our team is made up of a diverse group of individuals dedicated to completing every task with Pride, Integrity, and Diligence. We are committed to delivering exceptional customer service to both our clients and coworkers. If you are interested in joining an amazing team that values hard work and collaboration, we encourage you to apply!

Fabrication Shop Manager

<h3>Job Description</h3>
Job DescriptionSalary: 
About 1HMX
At 1HMX, we are pioneering the future of Human Machine eXperience (HMX) through innovation, precision, and performance. Our diverse technology portfolio includes electro-mechanical assemblies, immersive virtual reality systems, wearable electronics, infection control solutions, and advanced medical and industrial touch interface products. As a trusted manufacturing partner serving global markets, 1HMX is committed to delivering high-quality, compliant, and reliable solutions that meet the evolving needs of our customers. We are driven by a passion for engineering excellence and a deep commitment to transforming how people interact with technology.
 
Job Summary
This position supports Advanced Input Systems a 1HMX Brand Quality activities for aerospace customers - Onboard entertainment, suppliers, and global manufacturing operations (U.S. &amp; Asia). The Quality Engineer ensures compliance with aerospace standards (AS9100, FAA, NADCAP, etc.), drives supplier and internal quality improvements, and maintains strong customer relationships by meeting or exceeding quality performance requirements.

Key Responsibilities
<ul>
<li>Customer Engagement: Build long-term partnerships with aerospace OEM and Tier 1 customers by addressing audits, surveys, complaints, and product performance metrics.</li>
<li>Supplier Quality: Evaluate and develop supplier capabilities to ensure compliance with aerospace regulations and customer-specific requirements.</li>
<li>Quality Systems: Maintain and enhance the AIS QMS in alignment with AS9100 and ISO9001.</li>
<li>Auditing &amp; Compliance: Plan, lead, and support internal, supplier, and customer audits. Participate in FAA, EASA, or NADCAP compliance efforts.</li>
<li>FAIR &amp; RCCA: Lead First Article Inspections (FAIR/AS9102) and structured Root Cause Corrective Actions (RCCA/8D).</li>
<li>Continuous Improvement: Apply Lean and Six Sigma methodologies to reduce defects, improve yield, and ensure production readiness.</li>
<li>Data Analysis: Collect, analyze, and act on quality data (SPC, capability studies, DOE) to prevent recurrence of defects and improve product reliability.</li>
<li>Collaboration: Work with Product Development, Manufacturing Engineering, and global operations to integrate quality into new product introduction (NPI) and sustainment programs.</li>
</ul>

Required Skills &amp; Abilities
<ul>
<li>Strong knowledge of aerospace quality standards and customer expectations.</li>
</ul>
<ul>
<li>Deep understanding of aerospace quality systems, regulations, and customer expectations.</li>
<li>Strong technical writing and reporting skills for customer and regulatory documentation.</li>
<li>Effective communicator with ability to present to both technical and executive audiences.</li>
</ul>
<ul>
<li>Excellent organizational skills and attention to detail.</li>
<li>Proven ability to manage multiple priorities under strict aerospace compliance timelines.</li>
<li>Strong analytical and problem-solving skills with experience in RCCA methodologies (8D, Fishbone, 5 Why, etc.).</li>
</ul>
<ul>
<li>Proficient in MS Office; knowledge of ERP/QMS software preferred.</li>
</ul>

Education &amp; Experience
<ul>
<li>Bachelors degree in Engineering, Quality, or related technical field required.</li>
<li>Minimum 4+ years applicable experience, preferably in aerospace electronics and manufacturing.</li>
<li>Experience with AS9100, ISO9001:2015, and internal auditing processes.</li>
</ul>
<ul>
<li>Demonstrated experience with FAIR/AS9102, PPAP, FMEA, SPC, and process capability.</li>
<li>Lean/Six Sigma Green Belt or equivalent preferred.</li>
</ul>
<ul>
<li>Experience supporting or leading aerospace customer audits and compliance reviews highly desirable.</li>
</ul>

AIS is an equal opportunity employer. We are committed to creating an inclusive environment for all employees and do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic. We encourage applicants of all backgrounds to apply.

Quality Engineer - Aerospace

<h3>Job Description</h3>
Job DescriptionSalary: $115,000-$135,200 annually DOE 
PLCs Plus International Inc. is seeking a SCADA Developer/ PLC Programmer for the development of SCADA applications and PLC coding. This will include Control Room Human Machine Interface (HMI), Operator Interface Terminal (OIT), Programmable Logic Controllers (PLC), SCADA Historians, Databases, and Remote Alarm Systems. Refer to Desired Skills section for details.
 
Responsibilities include the following:
<ul>
<li>HMI application development and deployment </li>
<li>Database solutions </li>
<li>PLC programming and deployment </li>
<li>OIT application development and deployment </li>
<li>Specialty applications </li>
<li>System commissioning and troubleshooting</li>
</ul>
 
Job Requirements
<ul>
<li>PLC Programmer/SCADA Developer Required Skills and Experience </li>
<li>Iconics Experience</li>
<li>SQL query scripting </li>
<li>Python </li>
<li>PLC Programming utilizing GE Proficy for GE VersaMax, 90-30, &amp; RX3i </li>
<li>OIT application development for Rockwell utilizing FactoryTalkViewME </li>
<li>Calibration and testing of transmitters, switches, converters, recorders, indicators, actuated valves, and control loops back to PLC or DCS systems </li>
</ul>
 
Desired Skills and Experience
<ul>
<li>Oil and Gas experience is highly desirable</li>
<li>PLC programming for Rockwell Logix5000 &amp; Logix500 </li>
<li>OSI PI experience</li>
<li>SCADAPack programming experience</li>
<li>ROC800 programming experience</li>
<li>OIT Application development </li>
<li>HMI Development utilizing Wonderware System Platform (ArchestrA) 3.1 and lnTouch 10.1 </li>
<li>Wired and wireless Industrial Communications solutions </li>
<li>Understanding of Electrical Design and Engineering </li>
<li>Design, inter-connection and configuration of PLCs, &amp; DCS systems </li>
<li>Assisting in planning as required </li>
<li>Ensures that there is adequate data sheets and system documentation to complete all required pre-commissioning and commissioning checks and tests </li>
<li>Verifies all test equipment is NIST Traceable and has a current calibration date </li>
<li>Utilizes industry standards for testing such as ISA or another recognized and approved standard </li>
<li>Completes Red lines and B check sheets as required</li>
<li> </li>
</ul>
Required Minimum Qualifications (Techs):
<ul>
<li>High School Diploma, or Equivalent</li>
<li>Valid Drivers License with clean driving record</li>
<li>Five (5) years experience as FCO/Commissioning Technician in oilfield, preferred</li>
</ul>

Required Education, Training and Certificates:
<ul>
<li>H2S, or ability to obtain upon hire</li>
</ul>
 
Required Knowledge, Skills &amp; Abilities:
<ul>
<li>Ability to work in a team environment</li>
<li>Ability and willingness to receive and follow direction</li>
<li>Ability to clearly communicate, both verbal and written</li>
<li>Ability to work safely, and recognize potential hazards</li>
<li>Ability to legally operate a motor vehicle</li>
<li>Ability to recognize and respond to dangerous situations or emergencies such as high voltage systems, electrical fires, loose hot wires, broken power lines, etc. This position will be working with 50 volts or less. No high voltage repair or firefighting is within job responsibilities</li>
<li>Ability to diagnose system malfunction, locate cause of breakdown and correct the problem or recommend solution</li>
<li>Ability to set and balance priorities in order to complete projects on time</li>
<li>Ability to make decisions and recommend appropriate course of action in difficult situations</li>
<li>Ability to handle stress and possess positive trait even in difficult or challenging situations</li>
</ul>

Automation / Commissioning Technician Specific Skillsets:
<ul>
<li>Comprehensive knowledge of control systems, equipment, operational and mechanical systems including; installation, testing, maintenance, and repair</li>
<li>Knowledge of applicable codes, standards, and regulations</li>
<li>Working knowledge of AC and DC control circuits</li>
</ul>
 
About this company
PLCs Plus, is an industry leader in Programmable Logic Controllers (PLC), Human Machine Interface (HMI), and Supervisory Control and Data Acquisition (SCADA). Our services span the control systems spectrum, from end-device to the corporate database
 
We specialize in:
<ul>
<li>HMI and SCADA architecture and system design </li>
<li>PLC &amp; DCS layout, system design, and configuration </li>
<li>PLC programming </li>
<li>HMI application development </li>
<li>Database solutions </li>
<li>Preventative maintenance </li>
<li>Specialty applications</li>
</ul>
Join a long established and growing organization that offers and promotes working in a team environment
 
PLCs Plus prides itself in the ability to provide:
<ul>
<li>Competitive Salaries</li>
<li>Vacation and Sick Pay</li>
<li>Paid Holidays</li>
<li>Comprehensive Medical Coverage with the option of a Flex Benefits (125) Plan</li>
<li>Dental, Vision, Short Term Disability, Long Term Disability, and Life Insurance paid by employer</li>
<li>401K</li>
<li>Training and Mentorship</li>
<li>H1B sponsorship</li>
<li>Relocation assistance</li>
</ul>

Opportunity:
PLCs Plus has solidified its reputation with great clients in the Permian Basin. West Texas has a tremendous amount of opportunity for growth and career development. You truly have the chance to have the American Dream and true job satisfaction. There is a lot of work that shows no sign of slowing. We would love for you to be a part of team PLCs Plus and take the opportunities that are available in this burgeoning market.

Physical Demand/Work Environment:

The physical demands described here are representative of those that must be met by the incumbent to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the incumbent is regularly required to talk, hear, and see. The incumbent frequently is required to stand, stoop, kneel, crouch, climb, balance and walk. The incumbent is occasionally required to sit. The incumbent must frequently lift and/or move up to 50 pounds and push/pull up to 100 pounds. Visual Acuity: must be adequate to perform all required Job Description tasks in a safe manner. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually loud and may require use of ear plugs on occasion. Work is usually done outside at a job site/field site that may have inclement weather conditions. The incumbent will be required to drive / travel to many locations within the Permian Basin. The incumbent is exposed to moving mechanical parts, vehicles and equipment.

 
Disclaimer:
The above job description covers the principal duties and responsibilities of the job. The description shall not however, be construed as a complete job listing of all duties, which may be required from day-to-day

PLC Programmer/SCADA Developer

<h3>Job Description</h3>
Job DescriptionBenefits: 
<ul>
<li>401(k)</li>
<li>Bonus based on performance</li>
<li>Dental insurance</li>
<li>Health insurance</li>
<li>Paid time off</li>
</ul>
 Benefits/Perks 
<ul>
<li>Competitive Compensation</li>
<li>Great Work Environment</li>
<li>Career Advancement Opportunities</li>
</ul>
Job Summary Adrenalin Attractions is seeking a CAD &amp; Fabrication Specialist to join our team! In this role, youll be responsible for optimizing designs for fabrication and production, developing detailed 2D and 3D models, and overseeing digital fabrication processesincluding CNC operations and 3D printing. Youll work closely with project leads to coordinate and streamline workflows across departments. The ideal candidate brings expertise in CAD and CAM software such as Rhino, SolidWorks, Fusion 360, and more, with experience in CNC programming and fabrication planning. A background in themed fabrication is highly preferred. Strong leadership, clear communication, and the flexibility to work overtime in a fast-paced, team-driven environment are essential. Responsibilities / Requirements MUST HAVE EXPERIENCE IN THEMED FABRICATION AND/OR CONSTRUCTION. 1. CAD Modeling &amp; Technical Drawings Serve as the primary CAD designer, creating 2D and 3D models for awarded projects. Develop fabrication-ready models from scratch based on project specifications and input from leads and managers. Ensure all CAD work aligns with manufacturing feasibility and project requirements. Oversee the organization and management of CAD files, ensuring accessibility and proper documentation. 2. Digital Fabrication &amp; 3D Printing Manage all 3D printing operations, including modeling, file preparation, printing, post-processing, and machine maintenance. Ensure 3D prints meet quality standards and are optimized for functionality. Oversee the maintenance and troubleshooting of 3D printers to ensure continuous operation. 3. Fabrication Planning &amp; Method Development Determine primary fabrication methods for each project based on discussions with managers and leads. Direct the fabrication shop technician and assistant CAD draftsman to execute fabrication strategies efficiently. Collaborate with project leads to establish efficient and cost-effective production workflows. 4. CNC &amp; CAM Programming Run CAM operations and program toolpaths for CNC machines, including the CNC router, hot wire, and Frog Mill. Assist in CNC machine troubleshooting, setup, and operation during peak workload periods. 5. Equipment Maintenance &amp; Oversight Ensure all digital fabrication machines (CNCs, 3D printers, and hot wire cutters) are properly maintained and running efficiently. Coordinate repairs and servicing for CNCs, 3D printers, and other digital fabrication equipment as needed. 6. Project Leadership &amp; Team Coordination Act as the initial point of contact for all CAD-related work, ensuring all projects start with properly developed CAD files. Oversee and guide the assistant CAD draftsman and fabrication team on technical execution. Become familiar with the previous Director of Projects role to transition into key responsibilities over time. Be prepared to work overtime when necessary to ensure projects meet deadlines. 7. Software &amp; Workflow Management Ensure all CAD, CAM, and fabrication processes are carried out using Fusion 360, with occasional use of Revit and Rhino. Maintain an organized workflow to optimize CAD-to-fabrication processes and reduce errors. Qualifications 
<ul>
<li>Previous experience with Solidworks, Fusion 360, or AutoCAD</li>
<li>Advanced proficiency in Solidworks (primary software)</li>
<li>Excellent written and verbal communication skills</li>
<li>The ability to work well within a team environment</li>
<li>Proven ability to lead a team of CAD draftsmen and fabrication technicians, providing guidance and support.</li>
<li>Experience with GD&amp;T preferred</li>
<li>10+ years of experience in CAD modeling, digital fabrication, and CNC machining, preferably in a themed fabrication, experiential design, or manufacturing environment.</li>
<li>Strong understanding of manufacturing/fabrication processes, materials, and fabrication feasibility. (preferably in themed fabrication)</li>
<li>Experience with 3D printing operations, including file preparation, printing, and post-processing.</li>
<li>Hands-on experience with CNC machining and CAM programming (CNC router, hot wire, Frog Mill)</li>
<li>Knowledge of fabrication planning, workflow optimization, and cost-effective production strategies</li>
<li>Ability to work overtime as needed to meet project deadlines</li>
</ul>
 Additional Preferred Skills 
<ul>
<li>Experience with surface or character modeling</li>
<li>Experience with 3D slicer software for 3D prints</li>
<li>Other skillsets or familiarity associated with fabrication for themed entertainment</li>
<li>Bachelors degree in Mechanical Engineering, Industrial Design, Architecture, or a related field, or equivalent experience.</li>
</ul>

CAD/CAM Fabrication Specialist

<h3>Job Description</h3>
Job DescriptionResponsibilities: 
<ul>
<li>The ISO Auditor is responsible for planning, conducting, and reporting management system audits in accordance with applicable ISO standards (e.g., ISO 9001, ISO 14001, ISO 45001, ISO 13485).</li>
<li>This role evaluates organizational processes for conformity, effectiveness, and continual improvement while maintaining objectivity, professionalism, and compliance with audit requirements.</li>
</ul>
Technical &amp; Industry Experience: 
<ul>
<li>Mechanical Engineer / Manufacturing Engineer / Industrial Engineer / Quality Engineer</li>
<li>3-5 years of relevant experience with conducting ISO 9001, ISO 14001, ISO 45001, ISO 13485 audits and inspections.</li>
<li>Measuring experience</li>
<li>Experience in quality inspections</li>
<li>Experience in manufacturing processes</li>
<li>Experience in operations</li>
<li>Experience in data analysis</li>
<li>Report writing and documentation skills. Must be able to use MS Word and Excel to submit documents and reports within the time specified (usually within 24 hours after job completion)</li>
<li>Ability to work independently and manage audit scope.</li>
</ul>
Job Type: 1099 Contractor Project Duration: 
<ul>
<li>CURRENT PROJECT: ongoing
<ul>
<li>Note: This is a 1099 contract role project duration may vary based on client needs</li>
</ul>
</li>
</ul>
Shift Hours: 
<ul>
<li>CURRENT PROJECT: 1st shift (on site).
<ul>
<li>Note: As a 1099 contractor, project schedules may vary depending on site availability</li>
</ul>
</li>
</ul>
Location: 
<ul>
<li>Must be able to travel to Washington DC and nearby areas (exact CLIENT address can ONLY be shared once contractor joins)</li>
</ul>

Quality Auditor @ Washington DC (1099 Contractor)

<h3>Job Description</h3>
Job Description
French &amp; Parrello Associates (FPA) is seeking a Senior Staff Engineer for our Electrical Department in Wall, NJ. 
Responsibilities
 
<ul>
<li>Experience or proficiency in the utilization of AutoCAD is preferred but not required.</li>
<li>Revit BIM modeling experience is preferred but not required.</li>
<li>Strong written and spoken communication skills.</li>
<li>Strong work ethic, positive attitude, and reliability.</li>
<li>Ability to work in a team environment or individually.</li>
<li>Must have and maintain a valid Driver’s License and pass a background check.</li>
<li>BSEE from an accredited college or university.</li>
<li>2 years minimum experience in the design of Electrical systems.</li>
<li>Ability to manage MEP projects is a plus.</li>
<li>Professional Engineer (PE) is a plus.</li>
<li>Required Qualifications</li>
</ul>
Qualifications

<ul>
<li>A Bachelor’s or Master’s degree in Electrical Engineering</li>
<li>Knowledge of electrical and building codes and standards, including National Electrical NEC, NFPA-72, Energy Code, and International Building Code (IBC)</li>
<li>Experience with fire alarm system design, lighting design, lighting control and building low voltage systems requirements</li>
<li>Proficient and accurate in all areas of AutoCAD </li>
<li>Experience with Revit MEP is preferred but not required</li>
<li>Ability to meet fast-paced deadlines while maintaining quality design</li>
<li>Sincere commitment to learning new skills and accepting new responsibilities</li>
<li>EIT registration is preferred but not required</li>
</ul>
Benefits
 
We understand that a fulfilling career is about more than just the work you do – it’s about feeling secure in your health, confident in your financial future, and balanced in your personal and professional life. That’s why we strive to offer one of the most comprehensive benefits packages in our industry. By doing so, we aim to attract top talent and ensure that every member of our team has the resources they need to thrive, both at work and at home.
 
<ul>
<li>Medical, Dental, Vision insurance</li>
<li>401(k) Retirement Plan with Employer Matching</li>
<li>Roth 401(k) Option</li>
<li>Individual and Dependent Life Insurance</li>
<li>Short and Long-Term Disability Insurance</li>
<li>Health Wellness Programs, Flu shots, Rewards for Healthy Lifestyle</li>
<li>Tuition Reimbursement</li>
<li>Training and Professional Development</li>
<li>Opportunities for Community Outreach Through Internal Networks</li>
<li>Personal Time Off Program (PTO)</li>
<li>Transit/Parking Program</li>
<li>Flexible Summer Work Schedules</li>
<li>Aflac</li>
<li>Discount Tickets: Tickets At Work, LifeMart, and Staples Work Wins</li>
<li>Credit Union</li>
<li>Verizon Wireless Discount</li>
<li>Dry Cleaning Service</li>
<li>Corporate Events, Outings &amp; Activities</li>
</ul>
Compensation
The projected compensation range for this position is $80,000 to $105,000. Actual compensation will depend on factors such as experience, education and skill set. 
 
Who We Are

We value curiosity, accountability, and continuous learning – and we provide the tools, mentorship, and flexibility to help every team member reach their full potential. We’re looking for talented, driven professionals who share our passion for pushing boundaries and creating solutions that make a real difference in people’s lives.

At FPA, we’re proud to be recognized year after year as one of NJBIZ’s Best Places to Work, and consistently ranked among the top firms in the industry. These honors reflect our people-first culture, collaborative spirit, and commitment to innovation and excellence. At FPA, you’ll find more than a job – you’ll find purpose, connection, and a workplace that invests in your growth and success.

Engineering and Consulting Since 1974

For over 50 years, French &amp; Parrello Associates (FPA) has been a trusted partner in delivering innovative solutions that shape communities, enhance infrastructure, and drive progress. As a multidisciplinary firm, we integrate expertise across diverse markets to streamline project execution, optimize resources, and achieve cost-effective, forward-thinking results.

FPA combines boutique-level service with enterprise-level expertise – offering clients the best of both worlds. With a steadfast commitment to quality, collaboration, and innovation, our team continues to shape the built environment with solutions that stand the test of time.

Senior Staff Engineer - Electrical

<h3>Job Description</h3>
Job DescriptionProduction Team Lead (Food Production) Lewisville, TX 75057 Hours: 5:00am - 1:30pm M-F Pay Rate: $17.00/hr ***REFERRAL PROGRAM***ZERO COST WELLNESS PLAN***PAID HOLIDAYS*** We are seeking a dedicated and experienced Production Lead to join our team in Lewisville, TX. The Production Lead will oversee daily production operations, ensuring efficiency, quality, and safety standards are met. This role requires strong leadership skills, attention to detail, and the ability to work in a fast-paced environment. Culture Our staffing professionals are committed to meeting your individual needs and exceeding your expectations. Experienced top-quality candidates are the result of our extensive screening process, in-depth evaluations, industry-specific testing, and reference checking. Responsibilities Key Responsibilities: 
<ul>
<li>Supervise and coordinate production activities to meet daily targets.</li>
<li>Ensure compliance with safety and quality standards.</li>
<li>Train and mentor production staff.</li>
<li>Monitor production processes and implement improvements.</li>
<li>Maintain accurate production records and reports.</li>
<li>Collaborate with other departments to optimize production flow.</li>
</ul>
Qualifications: 
<ul>
<li>High school diploma or equivalent; additional education or certifications in production management is a plus.</li>
<li>Minimum of 3 years of experience in a production or manufacturing environment.</li>
<li>Strong leadership and team management skills.</li>
<li>Excellent problem-solving abilities.</li>
<li>Ability to work flexible hours, including weekends and holidays.</li>
<li>Proficiency in Microsoft Office Suite.</li>
</ul>
 Requirements Authorized to work in the US without sponsorship Bilingual/Spanish Equal Opportunity Employer Hire Energy provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Requisition #cm90xx9bs6h1e0iqp9x3t2gsf

8,936 Manufacturing Jobs in Hennepin County