<h3>Job Description</h3>
Job Description
 As an Electronics Technician, you will test and troubleshoot during acceptance testing, by applying principles and theories of electronics, electrical circuitry, electronic and electrical testing, engineering, mathematics and physics.
ESSENTIAL DUTIES, RESPONSIBILITIES &amp; AUTHORITIES include the following. Other duties may be assigned.
• Test/troubleshoot using various equipment (ie: Scopes, meters, signal generators, power sources, etc)
• Be able to find and understand associated technical procedures needed.
• Identify pass / fail conditions and correct them if needed.
• Ability to navigate computer functions.
• Record data.
• Read a detailed schematic for troubleshooting purposes.
• Perform component level troubleshooting.
• Maintenance of test equipment and test station.
• Layout, repair and build test fixtures.
• Works with external customers on repairs.
QUALIFICATIONS FOR AN ELECTRONICS TECHNICIAN
• Associate’s Degree or equivalent from a two-year college or technical school
• Six to ten years of related experience OR a combination of relevant education, training, and experience
• Must pass Electrical Safety Training and Technician Electrical knowledge Test
• Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
• Ability to use internet/intranet, cross functional Enterprise Resource Planning software, the MS Office package, and other software programs and packages to their potential to provide a work product fitting to the level of the position. Must also be able to perform troubleshooting
• Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
• Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
SALARY RANGE
The starting hourly rate for the role is between USD $25.00 and $32.00. The actual base is dependent upon many factors, such as training, transferable skills, work experience, business needs, market demands. The base pay range is subject to change and may be modified in the future. The role may also be eligible for variable bonus programs and benefits. 
ABOUT TDK-LAMBDA AMERICAS INC.
Acquired by TDK in 2008, TDK-Lambda Americas Inc. represents the culmination of three well-established North American power manufacturers: Electronic Measurements Inc., Lambda Electronics, and Innoveta Technologies. We have earned the reputation of being a trusted world-class organization through a history of providing reliable and innovative power supplies. Our broad product offering features over 6,000 models that are suited for many applications, including medical, industrial, broadcast, defense, factory automation, and LED/LCD signage. Our view is that "power supply" is more than just an electronic device, but the heart of our customer's systems. This belief has helped us become a global leader in our industry.
We employ approximately 300 people in our engineering, manufacturing, and sales offices across the United States. At our company, we value the work and ideas of our employees. They are encouraged to express their opinions and take the initiative, which has helped with the growth of our community and kept us at the cutting edge of new technologies. We offer our employees not only a career opportunity but also an environment that allows them to succeed.
TDK-Lambda Americas offers great benefits and perks, including healthcare benefits, a 401(k) with match, paid time off (PTO), educational assistance, recognition plans, service awards, and performance-based awards.
To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. TDK-Lambda Americas is an Equal Opportunity, Affirmative Action Employer and is committed to the full inclusion of all qualified individuals. In keeping with that commitment, we will take the steps to assure that people with disabilities are provided reasonable accommodations to perform the essential functions of the position.

Electronics Technician

<h3>Job Description</h3>
Job DescriptionJOB DESCRIPTION Job Title: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Regulatory Engineer&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Classification: Salary Exempt Department:&nbsp;&nbsp;&nbsp;&nbsp; Engineering&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Report to: Manager of Engineering Position Description: We are seeking a skilled Regulatory Engineer with a strong background in commercial and/or industrial refrigeration systems to join our engineering and compliance team. The Regulatory Engineer will be responsible for ensuring our products meet all applicable safety, environmental, and performance regulations and standards across domestic and international markets. This role combines technical expertise in refrigeration with regulatory knowledge to guide product design, testing, certification, and market approval. Duties and Responsibilities: &nbsp;
<ul>
<li>Interpret, apply, and monitor relevant codes, standards, and regulations (UL, NSF, ASHRAE, DOE, EPA, ISO, CEC, etc.) related to refrigeration equipment.</li>
<li>Collaborate with design engineering teams to ensure compliance is integrated early in product development.</li>
<li>Lead product certification and testing efforts with third-party agencies (UL, CSA, NSF, etc.).</li>
<li>Maintain up-to-date knowledge of evolving regulations impacting refrigeration (energy efficiency, flammability, refrigerants, emissions, safety).</li>
<li>Develop internal compliance procedures and documentation for new and existing products.</li>
<li>Prepare and submit regulatory filings and technical reports.</li>
<li>Act as the point of contact with regulatory agencies, auditors, and certification bodies.</li>
<li>Provide training and guidance to engineering, manufacturing, and quality teams on compliance requirements.</li>
<li>Support product lifecycle management by ensuring continued compliance with updated regulations.</li>
<li>Other job duties as assigned. </li>
</ul>
Required Knowledge, Skills, and Abilities: &nbsp;
<ul>
<li>Bachelor’s degree in mechanical engineering, electrical engineering, or related field.</li>
<li>3–7+ years of experience in refrigeration design, testing, or regulatory compliance.</li>
<li>Strong knowledge of refrigeration principles, components, and refrigerants (including low-GWP and natural refrigerants).</li>
<li>Experience with U.S. and international product certification standards (UL, CSA, NSF, IEC, ASHRAE, DOE, EPA).</li>
<li>Familiarity with risk assessment and safety standards for flammable refrigerants (R-290, R-600a, etc.) is a strong plus.</li>
<li>Excellent technical writing and documentation skills.</li>
<li>Strong communication skills for working across teams and with external agencies.</li>
<li>Detail-oriented with the ability to manage multiple compliance projects.</li>
</ul>
 Preferred: &nbsp;
<ul>
<li>Familiarity of CAD &amp; PDM Software (SolidWorks)</li>
<li>Knowledge of refrigeration thermodynamics and cycle analysis.</li>
</ul>
 Physical Demands
<ul>
<li>Must be able to remain in a sitting or stationary position for long periods of time working on a computer. </li>
<li>Must be able to work independently and efficiently without constant direct oversite or supervision. </li>
<li>Must be able to lift up to 30 lbs. occasionally</li>
</ul>
Job Type: Full-time
Work Environment: Office quiet, cubicle
Work Authorization:&nbsp;No calls or agencies please. Beverage-Air will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire
Equal Opportunity Employer: Beverage-Air is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.
Work Location:
<ul>
<li>One location</li>
</ul>
Work Remotely
<ul>
<li>On Occasion&nbsp;</li>
</ul>
Salary Range: Depending on Experience along with bonus %
Powered by JazzHR
0QGFQToSLj

Regulatory Refrigeration Engineer

<h3>Job Description</h3>
Job Description
Validation &amp; Engineering Group, Inc. (V&amp;EG) is a leading services supplier who provides solutions for the Pharmaceutical, Biotechnology, Chemical, Food, and Medical Devices industries in the following areas: Laboratory, Compliance, Computer, Engineering, Project Management, Validation, and other services.
We are seeking a talented, dedicated individual committed to work under the highest ethics standards for the following position:
<ul>
<li>Process Engineer
<ul>
<li>Experience in Process Engineering for the Medical Device Industry</li>
<li>Experience in Qualifications</li>
</ul>
</li>
</ul>
Qualifications:
<ul>
<li>Bachelor's Degree in Science or Engineering.</li>
<li>Minimum of 3 years of experience in direct pharmaceutical, medical device or biotechnology industries.</li>
<li>Must be fully bilingual (English / Spanish) with excellent oral skills.</li>
<li>Must be proficient using MS Windows and Microsoft Office applications.</li>
<li>Strong knowledge in regulatory guidance</li>
<li>Experience with Process Engineering and the development and execution of Validation Protocols</li>
<li>Technical Writing skills and investigations processes.</li>
<li>Available to work extended hours, possibility of weekends and holidays.</li>
</ul>

MF01-091825 Process Engineer / Qualification

<h3>Job Description</h3>
Job Description
You are a P.E. with a B.S. in Mechanical Engineering and 10+ years of hands-on manufacturing and production experience. You have a comprehensive understanding of plant and/or process engineering.
You are already an expert. Robson Forensic will train you to be a forensic expert. 
As a Mechanical Engineer – Industrial/Manufacturing Expert, you will:
<ul>
<li>Investigate incidents involving equipment, safety products/procedures, material handling, hand tools, &amp; plant layouts.</li>
<li>Analyze inadequacies in machine guarding, instructions, warnings, or personal protective equipment (PPE), etc., applying your comprehensive knowledge of standards and practices.</li>
<li>Write clear, scientifically sound reports.</li>
<li>Provide expert testimony.</li>
</ul>
You will delve into the "why" behind incidents, critically assessing decision-making, operational procedures, and the standard of care. This role offers you a chance to:
<ul>
<li>Make a tangible difference.</li>
<li>Continuously learn and grow.</li>
<li>Collaborate with highly respected experts.</li>
</ul>

LOCATIONS: Miami Lakes/Palm Beach Gardens, FL, Atlanta, GA, Las Vegas, NV, Columbus/Dublin, OH, Lancaster, PA
REQUIREMENTS:
<ul>
<li>You have a Bachelor’s degree in Mechanical, Electrical, or Industrial Engineering and/or a closely-related field.</li>
<li>You are a licensed Professional Engineer (P.E.) or can obtain licensure in at least one state within six months.</li>
<li>You have 10+ years of manufacturing and production experience, including design, installation, start-up, commissioning, operation, maintenance, and troubleshooting spanning a variety of industrial equipment.</li>
<li>Your expertise must include design or specification of industrial equipment, material handling equipment (such as forklifts, aerial lifts, and cranes), industrial facility operation and maintenance processes, utility systems (steam, water, air, gas, etc.), and manufacturing processes.</li>
<li>Your experience and training in reliability-centered maintenance (RCM), failure mode and effect analysis (FMEA), root cause failure analysis, site incident investigations, and hazard analysis/risk assessments is desirable.</li>
<li>You can work both independently and as part of a collaborative team.</li>
<li>You can manage a portfolio of 40-60 projects/clients.</li>
<li>You have excellent technical, analytical, writing, and communication skills.</li>
<li>You are willing to travel about 20% on average.</li>
<li>You have a valid driver’s license and the ability to drive.</li>
<li>Prior forensic experience is not required. We seek professionals eager to apply their deep industry knowledge to a challenging new domain.</li>
</ul>
ABOUT US:
Robson Forensic is a national leader in expert witness consulting, providing technical expertise across many fields within engineering, architecture, science, and a broad range of specialty disciplines.
Employees at Robson Forensic work alongside highly respected experts from both industry and academia. Our forensic experts are engaged in meaningful casework that is consequential to industry and society. Robson Forensic provides a unique working dynamic that blends collaboration and autonomy.
We are an Equal Opportunity Employer.

HOW TO APPLY:
If this opportunity meets your expectations for a challenging and rewarding career, and you meet our minimum requirements, please apply and attach your resume and a cover letter outlining your professional background and experience.

Mechanical Engineer - Industrial/Manufacturing - Forensic Expert

<h3>Job Description</h3>
Job DescriptionAbout TorusTorus is a pioneering, sustainable energy solutions company based in Utah, dedicated to revolutionizing renewable energy storage and management. Our mission is to empower communities to become their own sustainable energy providers. We are driven by a deep-rooted commitment to sustainability and community. We tackle critical challenges facing the American energy landscape. Our advanced Torus Flywheel™ technology charges and discharges electricity 16 times faster than traditional batteries, ensuring rapid response to grid demands and enhancing energy efficiency. Our advanced manufacturing, research, and development facilities in South Salt Lake and Springville, Utah drive continuous innovation, and our commitment to American manufacturing ensures quality and reliability. Join us at Torus and be part of an exciting team that is transforming the energy landscape. Job Details Location Onsite - South Salt Lake or Salt Lake CitySchedule &amp; FLSA Full Time, HourlyShift First Shift 8:00 am - 4:30 pmReports to Production Supervisor We have ongoing and anticipated needs for skilled CNC Machinists. Strong candidates may start sooner based on current openings, or we'll keep your application active for upcoming positions. About the RoleAs a CNC Machinist - VTL Specialist at Torus, you'll operate a CNC Vertical Turning Lathe machine to produce precision-machined large parts for sustainable energy systems. Your craftsmanship directly supports our mission to empower communities to become their own sustainable energy providers, ensuring every component meets the exacting standards required for renewable energy infrastructure. Responsibilities
<ul>
<li>Set up and operate CNC Vertical Turret Lathes according to job specifications</li>
<li>Read, interpret, and edit CNC programs (G &amp; M codes) to maximize efficiency</li>
<li>Read engineering drawings and apply geometric tolerances</li>
<li>Monitor machine performance, troubleshoot issues, and make adjustments for optimal operation</li>
<li>Use precision inspection tools (micrometers, calipers, bore gauges, thread gauges, etc.) to verify tolerances of .0005" - .005"</li>
<li>Determine optimal feeds, speeds, and tooling selections for each job</li>
<li>Design custom fixtures, tooling, and experimental parts as needed</li>
<li>Inspect finished products and make quality adjustments to meet production standards</li>
<li>Perform routine machine maintenance to prevent breakdowns</li>
<li>Operate additional equipment including CNC machines, press brakes, and laser cutters as required</li>
<li>Maintain a safe work environment with zero accidents or injuries</li>
<li>Collaborate with team members to meet production goals and customer delivery deadlines</li>
<li>Perform other duties as assigned</li>
</ul>
 Who You Are
<ul>
<li>Seeking to build a long-term career in manufacturing with a mission-driven company</li>
<li>A clear communicator who values transparent dialogue, gives feedback promptly, and seeks context before making assumptions</li>
<li>Safety-conscious, quality-focused, and efficient as you balance precision with speed, committed to doing it right the first time</li>
<li>A problem-solver who approaches challenges with cautious optimism, leveraging your strengths to continuously improve</li>
<li>Self-motivated and adaptable as you thrive independently, take initiative, and adjust quickly to changing priorities</li>
<li>Customer-minded as you understand your work powers sustainable energy systems for real communities, and quality is non-negotiable</li>
</ul>
 Required Experience
<ul>
<li>2-5+ years of CNC machining experience; VTL operation expertise preferred</li>
<li>High school diploma or equivalent required</li>
<li>Proficiency in machine setup, operation, and troubleshooting</li>
<li>Ability to read and interpret technical drawings and blueprints</li>
<li>Strong attention to detail with commitment to quality standards</li>
<li>Working knowledge of machine maintenance procedures</li>
<li>Effective communication and collaboration skills</li>
<li>Self-motivated with ability to work independently under minimal supervision</li>
</ul>
 Preferred Experience
<ul>
<li>OSHA-compliant forklift certification preferred</li>
<li>Technical certifications or vocational training in electrical or mechanical disciplines preferred</li>
</ul>
 Physical Requirements
<ul>
<li>Must have the ability to safely lift and move objects weighing up to 50 lbs. </li>
<li>Must be capable of standing, bending, and executing repetitive tasks for prolonged periods of time.</li>
<li>Ability to read, identify, observe and recognize details, color-coding and fine print at close range on associated engineering drawings.</li>
<li>Ability to don personal protective equipment to include, but not limited to, respiratory protective equipment with proper seal, coveralls, ear protection, gloves, eye protection &amp; safety helmet. </li>
<li>Ability to operate forklifts, overhead cranes and climb ladders.</li>
<li>Ability to observe, detect and respond to audible and visual machine malfunction warnings.</li>
<li>Ability to communicate information so others can understand. Must be able to exchange accurate information in these situations.</li>
<li>Must report to work with the ability to use full and unimpaired skills and judgment to safely execute your job.</li>
<li>Proficiency in reading, writing, and speaking English required.</li>
</ul>
 Our Perks &amp; Benefits
<ul>
<li>Employee Rewards Package including equity</li>
<li>401(k) Retirement Savings Plan</li>
<li>Health Benefits Package: Choice between traditional PPO or HSA eligible medical plans; Dental insurance; and Vision insurance</li>
<li>Human-centered Paid Time Off (based on employment status) including 10 days accrued PTO; 10-days paid company holidays; Waiting period-free 100% paid parental leave.</li>
<li>Torus paid Life and AD&amp;D Insurance with option to purchase additional coverage</li>
<li>Voluntary Short- and Long-Term Disability Insurance</li>
<li>Peer Recognition Program</li>
</ul>
 Additional DetailsBackground Check All candidates are subject to a background check.Location The role location is based on business needs either in South Salt Lake or in Salt Lake City (air-conditioned). Schedule Full-Time + HourlyCompensation $20-28/hour (Note: We have the flexibility to hire at different levels, which may impact the corresponding pay range.) Work Authorization Applicants must already have the legal authorization to work in the US without requiring any employer sponsorship. Physical Requirements
<ul>
<li>Must have the ability to safely lift and move objects weighing up to 50 lbs. </li>
<li>Must be capable of standing, bending, and executing repetitive tasks for prolonged periods of time.</li>
<li>Ability to read, identify, observe and recognize details, color-coding and fine print at close range on associated engineering drawings.</li>
<li>Ability to don personal protective equipment to include, but not limited to, respiratory protective equipment with proper seal, coveralls, ear protection, gloves, eye protection &amp; safety helmet. </li>
<li>Ability to observe, detect and respond to audible and visual machine malfunction warnings.</li>
<li>Ability to communicate information so others can understand. Must be able to exchange accurate information in these situations.</li>
<li>Must report to work reliably and with the ability to use full and unimpaired skills and judgment to safely execute your job.</li>
<li>Proficiency in reading, writing, and speaking English required.</li>
</ul>
 Torus is proud to be an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
E04JI800ab0s4082srw

CNC Machinist - VTL Specialist - Future Opportunities

<h3>Job Description</h3>
Job Description
Descripción: 
Se solicitan profesores(as) para impartir cursos en el área de Maestría en Psicología Industrial Organizacional.
Requisitos:
<ul>
<li>Doctorado en Psicología con especialidad en Industrial Organizacional </li>
<li>Experiencia en el área de especialidad y ofreciendo cursos</li>
<li>Licencia de Psicólogo(a) vigente de PR</li>
</ul>
 “Patrono con Igualdad de Oportunidades en el Empleo y Acción Afirmativa para Mujeres, Veteranos y trabajadores/as con Discapacidad”

Profesor(a) MA Psicología Industrial Organizacional

<h3>Job Description</h3>
Job DescriptionJob Description:We are seeking a skilled and experienced Process Engineer to join our team specializing in injection molding. The ideal candidate will play a critical role in optimizing manufacturing processes, ensuring product quality, and driving continuous improvement in our operations. You will collaborate with crossfunctional teams to meet production goals while maintaining a focus on efficiency, safety, and sustainability.Key Responsibilities: Process Optimization and Continuous Improvement: * Develop, evaluate, and optimize injection molding processes to improve efficiency and reduce cycle times. * Troubleshoot and resolve process-related issues to ensure consistent quality and minimize downtime. * Lead continuous improvement initiatives, including Six Sigma and Lean Manufacturing techniques. * Identify opportunities for cost savings and waste reduction in the manufacturing process.Tooling and Equipment: * Collaborate with tooling engineers and project managers to design, maintain, and improve molds and related equipment. * Specify and recommend new machinery or upgrades to existing equipment for improved performance.Quality Assurance: * Monitor and analyze production data to ensure products meet quality standards and customer specifications. * Implement corrective actions and process adjustments as needed to address quality concerns.Training and Documentation: * Train machine operators and technicians on proper operating procedures and best practices. * Develop and maintain detailed process documentation, including work instructions and standard operating procedures (SOPs).Compliance and Safety: * Ensure all processes comply with company policies, industry regulations, and safety standards. * Participate in safety audits and risk assessments to identify and mitigate potential hazards.Qualifications: Education: Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related field. Experience: 3+ years of experience in injection molding or a similar manufacturing environment.Technical Skills: Proficiency in injection molding machine operation and process setup. Familiarity with mold design, material selection, and troubleshooting. Knowledge of CAD software and manufacturing simulation tools is a plus. Strong analytical, problem-solving, and communication skills

Process Engineer - Injection Molding

<h3>Job Description</h3>
Job Description
Summary
Responsible for activity related to engineering, cell layout and process set up for CNC, Lathe, Robodrill and Milling operations. 
Essential Duties and Responsibilities
Responsibilities of this position include, but are not limited to, the following:
<ul>
<li>Work on assigned launch activity in conjunction with the Program Manager. </li>
<li>Ensure the design of new lines are safe and meet ergonomic requirements</li>
<li>Works closely with Operations on design and layout with the operator in mind</li>
<li>Minimizes square footage and maximizes sales per square foot</li>
<li>Develop thorough capital and tooling requirements for quotations of new business</li>
<li>Approves prints and changes for new programs</li>
<li>Completes feasibility studies on new quotations, highlights risks and works with the customer to resolve</li>
<li>Sources capital equipment and tooling for new programs</li>
<li>Oversee the installation and commissioning of new equipment</li>
<li>Sets up processes to meet scrap and efficiency targets</li>
<li>Establishes and maintains a capital and tooling budget and meets targets</li>
<li>Ensures that the lines are launched within the approved budget</li>
<li>Interact with the customers on launch issues, participate in customer APQP meetings</li>
<li>Leads Run at Rate activities ensuring successful completion</li>
<li>Maintains thorough documentation for manufacturing lines including training and job instructions</li>
<li>Work to minimize scrap on future and existing programs</li>
<li>Execute engineering changes as needed</li>
<li>Update existing lines for capacity increases and VA/VE activities</li>
<li>Maintain plant and line layout</li>
<li>Develop and update PFMEA</li>
<li>Work closely with quality to resolve manufacturing issues and develop control plans</li>
<li>Write work instructions </li>
<li>Participate in change over process</li>
<li>Identify opportunities to speed change over processes</li>
<li>Maintain a high level of organization</li>
<li>Work with the team to establish 5S criteria for cells</li>
<li>Some travel may be required to support customer locations</li>
<li>All other duties as assigned.</li>
</ul>

Supervisory Responsibilities
<ul>
<li>None</li>
</ul>

Qualifications / Experience / Education
<ul>
<li>Agree to NETFORM Employee Handbook</li>
<li>Pass pre-employment screening (e.g., drug test, physical, and background test)</li>
<li>Ability to communicate effectively with co-workers</li>
<li>Experience with Solid Works, Solid Edge, and AutoCAD </li>
<li>Experience in Hot and Cold Forging</li>
<li>Strong understanding of Milling and Lathe operation and programming</li>
<li>Flow Forming experience a plus</li>
<li>Understanding of takt time and capacity planning</li>
<li>Understanding of automation (Fanuc, Allen Bradley, Siemens, ASE)</li>
<li>Understanding of 5S and Lean manufacturing principles</li>
<li>Must be innovative, dedicated to self-improvement and willing to try new things</li>
<li>Plex Experience a Plus</li>
<li>Bachelor’s degree in engineering or related experience</li>
</ul>
 Salaried exempt position - 8am-5pm

Machining Manufacturing Engineer

<h3>Job Description</h3>
Job Description
We are looking for an experienced drafter with superb time management and communication skills. Our ideal applicant will have experience working on architectural construction projects, interior design, &amp; specifically proficiency in CAD. Screening questions must be completed to be considered for the position.&nbsp;
Compensation:
$20 - $28 hourly
Responsibilities:
<ul>
<li>Create architectural blueprints and extensive construction documents containing specifications for building materials and products</li>
<li>Create drawings and renderings, and make adjustments to designs based on feedback</li>
<li>Communicate design intent specifications clearly and ensure quality control with the M&amp;M team</li>
<li>Ensure the end product meets the client’s style, quality, and budget expectations by consulting with project leads</li>
<li>Ensure standards compliance&nbsp;with client, utility, and industry drafting requirements</li>
</ul>
Qualifications:
<ul>
<li>Highly proficient with design CAD and design AutoCAD software</li>
</ul>
About Company 
Monarch &amp; Maker - Interior Designs is a premier hospitality and residential remodeling firm near Houston and is touted as one of the Top 5 in Texas. Our turnkey, client-focused, "outside-the-box" approach to large-scale projects has garnered fast-paced growth for us. 
Founder &amp; Principal, Micah Tipler, is an innovative force in design and architecture for hospitality and residential developments. She’s been recognized for her ongoing work as the lead residential and commercial designer at Bluejack National Golf Course in Montgomery, TX. Micah’s design, The Fort at Bluejack National was awarded Golf Inc. Magazine’s 2019 “Amenity of the Year.” 
From initial concept through project development and installation, Monarch &amp; Maker partners with clients to create truly unique and stunning environments. Our high-energy growing team provides every client the benefit of our full attention, on each project.

Drafter - Cad

<h3>Job Description</h3>
Job DescriptionERG is a research and consulting firm that provides a wide range of support to federal, state, and commercial clients. ERG offers multidisciplinary teams with nationally recognized skills in engineering, science, economics, public health, informational technology, and communications. We hire people with the best minds and then provide them with a vibrant and flexible environment in which to develop their careers. The qualified individual must be highly motivated with the skills to prioritize, perform, and communicate effectively in a fast-paced environment.&nbsp; ERG is hiring an experienced Electronics Technician to lead and support a wide variety of environmental systems design and fabrication projects. This position will lead and support an onsite client-site electronics shop while providing design and development expertise of prototype electronic sensor packages to support various research initiatives. The successful candidate will operate in a fast-paced, client-facing role that will require innovative thinking and rapid implementation.&nbsp; &nbsp;Job Description:
<ul>
<li> Contribute to the design and development of prototype electronic sensor packages to support various research initiatives</li>
<li>Design and implement precision compression and soldered connections for both power and signal wiring applications</li>
<li>Use soldering tools and compression terminals to ensure high quality, reliable connections capable of passing standard electrical codes</li>
<li>Utilize electronic test equipment (e.g., multimeters, oscilloscopes) to evaluate and troubleshoot electrical wiring and system performance</li>
<li>Design and implement small-scale solar power systems to support field instrumentation</li>
<li>Diagnose, troubleshoot, and repair electronic devices and instrumentation, both in the lab and in field environments</li>
<li>Support 3D printing operations, including file preparation, material selection, and printer maintenance/troubleshooting</li>
<li>Interpret and work from schematics, technical drawings, and conceptual guidance from researchers</li>
<li>Build, test, and maintain both field-deployed and benchtop equipment and instrumentation</li>
<li>Fabricate custom communication cables tailored to specific instrumentation requirements</li>
<li>Demonstrate strong mechanical aptitude with the ability to safely and effectively use hand and power tools</li>
</ul>
Qualifications and Skills:
<ul>
<li>Associate’s or bachelor’s degree in Electronics or a related technical discipline</li>
<li>A minimum of 10 years of work experience in an electronics/electrical focused role</li>
<li>A minimum of 10 years of hands-on experience in designing and fabricating electronic systems</li>
<li>Committed to continuous learning and skill development to enhance performance and adapt to evolving technologies</li>
<li>Proficient in making precision compression and soldered connections for both power -and signal wiring applications</li>
<li>Skilled in the use of soldering tools and compression terminals to ensure high-reliability -connections</li>
<li>Experience in writing scientific, technical, quality assurance, and health &amp; safety documents</li>
<li>Extensive experience in implementing organizational quality assurance plans and quality management practices</li>
<li>Excellent communication and interpersonal skills to work across departments and with external stakeholders</li>
<li>Ability to pass background checks and initial and random drug screening</li>
</ul>
ERG offers competitive salaries and excellent benefits, including health and dental insurance, life insurance, long-term disability, educational benefits, FSAs, a generous 401k plan, profit sharing, an EAP, 11-20 paid vacation days per year, 10 paid holidays per year, 56 hours or more of sick leave (based on the state you work in) per year (pro-rated for part-time) and more. The salary range for all positions depends on the years and type of experience.&nbsp;&nbsp;&nbsp;ERG is an equal opportunity employer and complies with all applicable EEOC regulations. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual preference, national origin, disability, or status as a protected veteran. &nbsp;&nbsp;Please be aware, the only authentic corporate domain for ERG is <a href="https://www.erg.com.&amp;nbsp" target="_blank">https://www.erg.com.&amp;nbsp</a>; ERG may, on occasion, screen applicants via telephone or video interviews via Skype, Teams, GoToMeeting, or another type of video platform. However, any candidate extended a job offer might be asked to meet in person with an ERG employee before providing confidential personal information associated with new employment.&nbsp;&nbsp;&nbsp;If you’re a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access ERG’s online application process as a result of your disability. To request accommodation, please contact Human Resources via email at <a href="mailto:Resumes-Lex@erg.com" target="_blank">Resumes-Lex@erg.com</a> or call (781) 674-7293.&nbsp;&nbsp;&nbsp;ERG fosters a friendly, flexible work environment. ERGers are dedicated to serving clients who are committed to making the world a better place. We promote and recognize principles of fairness and respect in the work we do, the partnerships we foster, and the culture we value both within and outside of our organization.&nbsp;

6,367 Manufacturing Jobs in Greenville County