<h3>Job Description</h3>
Job Description
THERE ARE THREE SHIFTS AVAILABLE
1st Shift - 7AM to 3:00 PM
2nd Shift - 3:00 PM to 11:00 PM
3rd Shift 11:00 PM to 7:00 AM
The main job objective encompasses the measuring, slitting, and rolling of finished fabrics, as well as preparing these materials for shipment through proper packing procedures. This role emphasizes technical expertise and individual contribution to the operational process.
Responsibilities
<ul>
<li>1. Keep the area around the machine clean and safe to work in</li>
<li>2. Retrieve and position full A-frames at the slitter</li>
<li>3. Inspect the cutting blades for proper operation</li>
<li>4. Monitor the exact slit dimensions (measure and set)</li>
<li>5. Set the specified roll length</li>
<li>8. Assemble boxes for packaging</li>
<li>9. Place slit fabric into boxes</li>
<li>10. Record the required data in the SAP, and properly identify the boxes with printed labels on top and</li>
<li>side</li>
<li>11. Assist in any area requested by manager at any time</li>
</ul>
Skills
<ul>
<li>Proven experience as a machine operator</li>
<li>Working knowledge of diverse high-speed machinery</li>
<li>Understanding of production procedures</li>
<li>Adherence to health and safety regulations (e.g. constant use of protective gear)</li>
<li>Attention to detail</li>
<li>Teamwork and communication skills</li>
<li>Physical stamina and strength</li>
<li>High school diploma or equivalent; technical degree is a plus</li>
</ul>
Job Type: Full-time
Company DescriptionGuiding PEOPLE along their chosen career path. Providing our clients with flexible Human Resource PRODUCTS, while showing our commitment to outstanding SERVICE. EEO 
<h3>Company Description</h3>
Guiding PEOPLE along their chosen career path. Providing our clients with flexible Human Resource PRODUCTS, while showing our commitment to outstanding SERVICE.\r\n\r\nEEO

Slitter Operator/Machine Operator - 3 SHIFTS AVAILABLE!

<h3>Job Description</h3>
Job DescriptionSalary: 
PLCs Plus International is seeking an Instrumentation Technician for our Midland Texas operations
Position Summary
TheInstrumentation Technician reports directly to the I&amp;E staff and is responsible for testing and commissioning all control system components and loops as directed. Duties include, but are not limited to:
<ul>
<li>Assisting in planning as required</li>
<li>Calibration and maintenance of mechanical, pneumatic, chemical, electrical and electronic process controls and measurement instrumentation to approved procedure</li>
<li>Understand, evaluate, and execute tests and procedures properly </li>
<li>Safely and efficiently execute daily tasks related to calibration and instrumentation activities</li>
<li>Develop and improve maintenance procedures</li>
<li>Install, maintain, repair, overhaul, calibrate and test a wide variety of industrial instrumentation such as control valves, transmitters, radars, levels, controlling and regulating level, flow, pressure and temperature meters</li>
<li>Execute preventative maintenance inspections on all instrumentation equipment</li>
<li>Interpret, evaluate and document calibration test results</li>
<li>Ensures that there is adequate data sheets and system documentation to complete all required pre-commissioning and commissioning checks and tests</li>
<li>Verifies all test equipment is NIST Traceable and has a current calibration date</li>
<li>Utilizes industry standards for testing such as ISA or another recognized and approved standard</li>
<li>Completes Red lines and B check sheets as required</li>
</ul>
Required Minimum Qualifications (Techs):
<ul>
<li>High School Diploma, or Equivalent</li>
<li>Valid Drivers License with clean driving record</li>
<li>Five (5) years experience as Instrumentation Technician in oilfield, preferred</li>
</ul>
Required Education, Training and Certificates:
<ul>
<li>OSHA 10, or ability to obtain upon hire</li>
<li>H2S, or ability to obtain upon hire</li>
</ul>
Required Knowledge, Skills &amp; Abilities:
<ul>
<li>Ability to work in a team environment</li>
<li>Ability and willingness to receive and follow direction</li>
<li>Ability to clearly communicate, both verbal and written</li>
<li>Ability to work safely, and recognize potential hazards</li>
<li>Ability to legally operate a motor vehicle</li>
<li>Ability to recognize and respond to dangerous situations or emergencies such as high voltage systems, electrical fires, loose hot wires, broken power lines, etc. This position will be working with 50 volts or less. No high voltage repair or firefighting is within job responsibilities</li>
<li>Ability to diagnose system malfunction, locate cause of breakdown and correct the problem or recommend solution</li>
<li>Ability to set and balance priorities in order to complete projects on time</li>
<li>Ability to make decisions and recommend appropriate course of action in difficult situations</li>
<li>Ability to handle stress and possess positive trait even in difficult or challenging situations</li>
</ul>
Instrumentation Technician Specific Skillsets:
<ul>
<li>Comprehensive knowledge of control systems, equipment, operational and mechanical systems including; installation, testing, maintenance, and repair</li>
<li>Knowledge of applicable codes, standards, and regulations</li>
<li>Working knowledge of AC and DC control circuits</li>
</ul>
About this company
PLCs Plus, is an industry leader in Programmable Logic Controllers (PLC), Human Machine Interface (HMI), and Supervisory Control and Data Acquisition (SCADA). Our services span the control systems spectrum, from end-device to the corporate database
We specialize in:
<ul>
<li>HMI and SCADA architecture and system design</li>
</ul>
<ul>
<li>PLC &amp; DCS layout, system design, and configuration</li>
</ul>
<ul>
<li>PLC programming</li>
</ul>
<ul>
<li>HMI application development</li>
</ul>
<ul>
<li>Database solutions</li>
</ul>
<ul>
<li>Preventative maintenance</li>
</ul>
<ul>
<li>Specialty applications</li>
</ul>
PLC's Plus prides itself in the ability to provide Competitive salaries, Vacation, Health, Life, Disability, Dental, Vision, 401K and 125 and training
Opportunity:
PLCs Plus has solidified its reputation with great clients in the Permian Basin. West Texas has a tremendous amount of opportunity for growth and career development. You truly have the chance to have the American Dream and true job satisfaction. There is a lot of work that shows no sign of slowing. We would love for you to be a part of team PLCs Plus and take the opportunities that are available in this burgeoning market.
Physical Demand/Work Environment:
The physical demands described here are representative of those that must be met by the incumbent to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the incumbent is regularly required to talk, hear, and see. The incumbent frequently is required to stand, stoop, kneel, crouch, climb, balance and walk. The incumbent is occasionally required to sit. The incumbent must frequently lift and/or move up to 50 pounds and push/pull up to 100 pounds. Visual Acuity: must be adequate to perform all required Job Description tasks in a safe manner. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually loud and may require use of ear plugs on occasion. Work is usually done outside at a job site/field site that may have inclement weather conditions. The incumbent will be required to drive / travel to many locations within the Permian Basin. The incumbent is exposed to moving mechanical parts, vehicles and equipment.
Disclaimer:
The above job description covers the principal duties and responsibilities of the job. The description shall not however, be construed as a complete job listing of all duties, which may be required from day-to-day

Instrumentation Technician

<h3>Job Description</h3>
Job DescriptionLegacy Talent Search is hiring experienced CNC Machinists to join a highly respected and innovative aerospace manufacturing company in Winslow, ME. This organization is a leader in precision machining for heavy industrial and aerospace applications, known for its innovation, craftsmanship, and commitment to quality. Every step of the process reflects pride, safety, and technical excellence. Key Responsibilities:
<ul>
<li>Review job packages thoroughly, including routing, blueprints, specifications, and documentation, to understand process plans, part configurations, materials, tooling, and required equipment.</li>
<li>Set up and operate CNC lathes and milling machines to safely and efficiently manufacture precision components for heavy industrial and aerospace applications.</li>
<li>Optimize machining processes by adjusting setups, tooling, and operations to improve efficiency, precision, and throughput.</li>
<li>Verify part conformance using precision measuring instruments (e.g., micrometers, calipers, gauges, CMMs) and take corrective action when necessary.</li>
<li>Document and report deviations in machining processes through Process Discrepancy Reports (PDRs) and assist in root cause analysis and corrective actions.</li>
<li>Collaborate with engineers and production leads to ensure quality, consistency, and efficiency in all machining operations.</li>
<li>Follow all safety, operational, and quality standards to maintain a safe and compliant aerospace manufacturing environment.</li>
</ul>
Qualifications &amp; Skills
<ul>
<li>3+ years of experience as a CNC Machinist in a manufacturing, aerospace, or heavy industrial environment.</li>
<li>Proficient in setting up and operating CNC equipment (lathes and/or mills).</li>
<li>Ability to read and interpret blueprints, schematics, and technical documentation.</li>
<li>Proficiency with precision measuring tools and GD&amp;T (Geometric Dimensioning &amp; Tolerancing).</li>
<li>Experience troubleshooting machining processes and improving production performance.</li>
<li>CNC programming knowledge (G-code, M-code) is a plus.</li>
<li>Strong attention to detail, teamwork, and commitment to safety and quality.</li>
</ul>
Compensation &amp; Shifts
<ul>
<li>Pay: $25–$38 per hour (based on experience and skill level).</li>
<li>Shifts Available:
<ul>
<li>Day Shift</li>
<li>Night Shift</li>
<li>Weekend Shift</li>
</ul>
</li>
<li>Competitive benefits package.</li>
<li>Opportunities for career growth and technical skill development.</li>
<li>Work with advanced CNC technology in a cutting-edge aerospace and heavy industrial environment.</li>
</ul>

CNC Machinist- Weekends

<h3>Job Description</h3>
Job Description
• PREPARE TEXTILES FOR CUTTING USING PATTERNS AND MARKERS TO SHOW CUTTING LINE. • PLACE MULTIPLE LAYERS OF TEXTILE ON THE CUTTING TABLE AND MARK USING SPECIFIC PATTERN. USE ASSIGNED CUTTING TOOLS TO CUT ALL REQUIRED PIECES FOR EACH CHAIR. • READ AND UNDERSTAND DIRECTIONS ON CUTTING DIRECTION RELATIVE TO TEXTILE ROLLS • RESPONSIBLE FOR ACCURATELY AND PRECISELY CUTTING VARIOUS TYPES OF TEXTILES USING POWERED CUTTING EQUIPMENT. • READ AND UNDERSTAND PRODUCTIONS SCHEDULES AND INSTRUCTIONS • ACCURATELY LABEL ALL COMPLETED WORK AND MOVE TO DESIGNATED STAGING AREAS • PERFORM MINOR MAINTENANCE ON CUTTING EQUIPMENT. • PUSH, PULL, LIFT AND/OR CARRY A MINIMUM OF 40 POUNDS. • OTHER DUTIES AS REQUIRED.
Company DescriptionFlokk is one of the fastest growing office furniture manufacturers globally. You may not have heard of us yet, but you have likely seen or sat on our products. If not, you will soon. In just a few years, through a bold M&amp;A strategy, the US has become our largest market, representing over 40% of Flokk's global revenues. We operate under a strong portfolio of premium brands including HAG, RH, Offecct, Giroflex, Profim, Connection, 9to5 Seating, Via Seating, and Stylex. We design beautiful, functional workplaces in partnership with some of the world’s leading designers. We care deeply about building great businesses and empowering people to do their best work – and we have big ambitions for the future. 
<h3>Company Description</h3>
Flokk is one of the fastest growing office furniture manufacturers globally. You may not have heard of us yet, but you have likely seen or sat on our products. If not, you will soon. In just a few years, through a bold M&amp;A strategy, the US has become our largest market, representing over 40% of Flokk's global revenues. We operate under a strong portfolio of premium brands including HAG, RH, Offecct, Giroflex, Profim, Connection, 9to5 Seating, Via Seating, and Stylex.\r\n\r\nWe design beautiful, functional workplaces in partnership with some of the world’s leading designers. We care deeply about building great businesses and empowering people to do their best work – and we have big ambitions for the future.

Textile Cutter 2nd Shift

<h3>Job Description</h3>
Job Description
Company Description:
hth companies is an industrial services provider offering mechanical insulation, scaffolding, industrial cleaning, and various other services to meet our customers' needs across the Midwest. At hth companies, we continue to promote the merit shop philosophy we were founded upon in 1984; rewarding employees based upon their merits of skills, productivity, and quality workmanship. Our vision is to be an organization that creates an environment where employees are encouraged to develop their full potential to provide quality work. We strive each day to better serve our customers and employees.
Position Overview:
The Millwright will repair, maintain, and facilitate installation of industrial equipment used in manufacturing and production operations. The Millwright will install, dismantle, repair, reassemble, and move equipment on work sites. They will work on pumps, compressors, gearboxes, conveyors (screw/paddle/belt), values and piping, etc. They must be able to read highly technical instructions and blueprints on equipment systems. Knowledge on how machinery works so repairs can be made when needed. Must be willing to work in various conditions (wet/dry, clean/dirty, hot/cold, inside/outside). Candidate will use a variety of hand and power tools, such as impacts, wrenches, as well as equipment for welding, brazing, and cutting. 
Responsibilities and Duties:
<ul>
<li>Ensures proper operation of large industrial equipment such as power generators, turbines, mining devices, assembly line machinery, and machinist tools.</li>
<li>Uses hand tools, hoists, jacks, spud wrenches, micrometers, laser alignment and power tools to assemble, install, align, and adjust piping, valves, pumps, and other various equipment.</li>
<li>Ensures machines perform to specifications by conducting tests; modifies and fine tunes machines.</li>
<li>Dismantling of existing connected and independent equipment.</li>
<li>Gathers and assembles parts for repairs or modifications based on blueprints.</li>
<li>Troubleshoots and repairs machines including when unexpected issues arise.</li>
<li>Performs preventive maintenance makes repairs on older machines.</li>
<li>Provides advice and recommendations to management concerning new machinery.</li>
<li>Plans and facilitates installation of new or refurbished machinery, which may include building platforms and foundations.</li>
<li>Conducts safety inspections of facilities.</li>
<li>Maintains records, including safety logs and inspection details.</li>
<li>Assist with jobsite safety to comply with all OSHA regulations and the hth companies' Safety Program.</li>
<li>Actively champions a positive workplace and safety culture.</li>
<li>Performs various other duties and functions as required or assigned.</li>
</ul>
Qualifications:
Education and Experience
<ul>
<li>Basic math skills.</li>
<li>Ability to use a variety of tools, which may include blowtorches, saws, pipe benders, and welding torches.</li>
<li>Thorough and broad understanding of a variety of equipment.</li>
<li>Ability to read and understand blueprints and schematics.</li>
<li>Strong analytical and problem-solving skills.</li>
<li>Thorough understanding of safety practices, guidelines, rules, and laws.</li>
<li>Ability to read schematics and blueprints.</li>
<li>Excellent verbal and written communication skills.</li>
<li>Excellent organizational skills and attention to detail.</li>
<li>Working understanding of safety principles, practices, and procedures.</li>
<li>Excellent time management skills with a proven ability to meet deadlines.</li>
<li>Ability to function well in a high-paced and at times stressful environment.</li>
<li>Excellent organizational skills and attention to detail.</li>
<li>Strong analytical and problem-solving skills.</li>
</ul>
Personal Characteristics
<ul>
<li>Ability to problem solve and develop solutions.</li>
<li>Follows directions of manager / lead / superintendent and clarifies responsibilities if needed.</li>
<li>Respects self, co-workers, managers, company, other contractors, and clients.</li>
<li>Adaptable in methods used to complete task.</li>
<li>Always have a support and teaching mindset.</li>
<li>Ability to read, analyze, and address complex data or situations.</li>
<li>Excellent communication skills - maintaining professionalism when communicating with staff and prospective employees alike.</li>
<li>Willing to go the extra mile.</li>
<li>Motivated to learn new skills.</li>
<li>Respects self, co-workers, managers, company, and prospective employees.</li>
<li>Shows up on time ready to complete work.</li>
<li>Ability to work independently.</li>
</ul>
Physical Abilities
<ul>
<li>Ability to lift, push, pull and move up to 50 lbs. on a routine basis.</li>
<li>Ability to climb Ladders and stairways regularly throughout the work shift.</li>
<li>Ability to observe conditions and others as safety attendant staying alert while seated for long periods of time as needed.</li>
<li>Ability to use hand tools, power tools, and other tools and equipment in a safe and controlled manner.</li>
<li>Ability to perform inspections of site, tools, and equipment.</li>
<li>Ability to perform behavioral observations focused on safety and process improvement.</li>
<li>Ability to follow safety protocol and to report any incident, unsafe act, or unsafe condition immediately to the site supervisor and safety manager. </li>
</ul>
Training
<ul>
<li>Must provide proof of successful completion of OSHA 10 hour within 60 days of starting at hth companies. </li>
</ul>
Benefits: 
<ul>
<li>Employer Supplemented Health Insurance.</li>
<li>Employer Paid Life Insurance.</li>
<li>Voluntary Vision and Dental Insurance.</li>
<li>Voluntary Critical Illness and Group Injury Insurance.</li>
<li>401K (Company Match of 3%).</li>
<li>Tuition Reimbursement.</li>
</ul>
hth companies is an equal opportunity employer. hth companies considers applicants without regard to race, color, national origin, ancestry, religion, creed, age, disability, sex, or sexual orientation, gender identity or expression, genetic information, veteran status, marital status, or any other legally protected status.

Millwright (3rd Shift)

<h3>Job Description</h3>
Job DescriptionOverviewJob Title: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; I &amp; E Technician&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Experience: &nbsp;&nbsp;&nbsp; 5 years’ experience Location:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Midland, TX Schedule:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Full-time, Monday-Friday, 40-hour workweek with on call rotation Travel: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Travel to work site is required; some travel during workday Pay:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Hourly, depending on qualifications and experience Classification: Non-Exempt, eligible for overtime &nbsp;Job DescriptionTo perform and lead diagnostics and repairs on facilities Instrument and Electrical systems.Responsibilities
<ul>
<li>Perform skilled I&amp;E Technician duties involving troubleshooting, diagnosing, and repairing facilities instrumentation, controls, and electrical systems.</li>
<li>Perform basic calibration on various forms of instrumentation, pressure transmitters, flow transmitters, differential pressure transmitters, temperature instruments, and control valves.</li>
<li>Perform basic checks and repairs on electrical equipment, motors, motor starters, circuit breakers, relays, UPS systems, VFD’s, BMS systems and meters.</li>
<li>Ensure that all Instrumentation and Electrical Maintenance work is performed in a safe manner and in accordance with the facilities safety procedures.</li>
<li>Work with facilities Mechanics and Operations on equipment repairs.</li>
<li>Manage I&amp;E maintenance work within the facilities to ensure that the work is performed in accordance with the safe/hot work permits and all safety and environmental regulations.</li>
<li>Collaborate with various I&amp;E instruments, testers, meters, tools, and equipment.</li>
</ul>
&nbsp;SkillsOrganization: Maintain high level of organization and apply systems to establish organization. Customer Service: Always looking for a way to help customers and co-workers; team player mindset is critical. Communication (Written and Verbal): Be able to communicate well and professionally with customers, vendors, managers, and team members. Software systems: Efficiency in a variety of operations and resource functions.Desired Qualities
<ul>
<li>High School diploma or equivalent</li>
</ul>
Requirements
<ul>
<li>5 years of experience</li>
<li>Stable work history</li>
<li>Must be legally eligible to work in the US. Sponsorship is not available.</li>
<li>Must be able to pass a background check, drug, and alcohol screening.</li>
<li>Must have a valid, current driver’s license.</li>
<li>Must be able to comply with customer site requirements for access/entry.</li>
<li>TWIC card preferred.</li>
</ul>
Additional Requirements
<ul>
<li>Direct report to the I&amp;E Foreman</li>
<li>Must report all Facilities Maintenance issues to the facilities Foreman</li>
<li>Ensure that facilities operators are kept aware of all maintenance work and maintenance issues within the facilities.</li>
<li>Must be familiar with the facilities overall processes.</li>
<li>Will be required to work overtime and be on an on-call rotation.</li>
<li>Must attend and be active in all safety meetings.</li>
<li>Must have the ability to work alone and perform maintenance work.</li>
<li>Will be required to drive a contract company vehicle and must have a driving record that meets contract standards.</li>
<li>Must be dependable and punctual in attendance.</li>
<li>Must have positive demeanor and ability to work with others under sometime hectic and stressful conditions.</li>
</ul>
Physical Requirements
<ul>
<li>Ability to lift or move up to 25 pounds regularly and on occasion up to 50 pounds.</li>
<li>Work in both indoor and outdoor environment. Possible exposure to noise, dust, fumes, and gases. </li>
<li>May be exposed to extreme heat or cold climate conditions.</li>
<li>Must be able to work around high voltage electrical equipment</li>
<li>See, respond, and report to possible dangerous situations. </li>
<li>Must have visual acuity to perform I &amp; E Technician duties. </li>
<li>Comfortable with heights and able to climb stairs/ladders.</li>
<li>Required to work extended hours including evenings, nights, weekends, and holidays. </li>
<li>Operating and driving a vehicle for extended periods of time on possible rough terrain</li>
<li>Sitting for extended periods. Bend, reach, kneel, and crouch handling bulky items. </li>
<li>Ability to work in inclement weather and/or extreme weather-related conditions.</li>
<li>Required to wear PPE/Safety gear at specific times.</li>
<li>Ability to wear an N-95 mask when required. </li>
</ul>
Benefits
<ul>
<li>Medical, dental, and vision benefits with company contributions</li>
<li>Flexible Spending Account-healthcare/dependent care accounts</li>
<li>Retirement plan with matching contributions</li>
<li>Generous paid time off policy, flexible paid holidays</li>
<li>Short &amp; Long-term disability</li>
<li>Company paid group life &amp; voluntary life insurance options. </li>
<li>EAP (Employee Assistance Program)</li>
<li>Rewarding career with growth potential and opportunities </li>
</ul>
About UsEnginuity Global LLC provides process automation services and innovative environmental and safety products to industrial facilities. We are a young company, with immense growth potential. Joining our team gives you experience in top-performing industrial facilities across the US, in the fastest growing markets in the country. We are looking for self-motivated, passionate, and hard-working professionals to grow our company.Equal Employment OpportunityEnginuity Global provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. &nbsp;
Powered by JazzHR
RPO0M0ernK

I & E Technician

<h3>Job Description</h3>
Job Description
Kronos has a long history of avionics engineering working with some of the largest aircraft integrators in the world. We always provide our partners with 100% customers satisfaction and on time delivery. If you are excited about working for a company that takes its job seriously and does not cut corners you will have a home with Kronos.
 
Our client is looking for a Mid-Level Electrical Manufacturing Engineer to support BT&amp;E Wire Shops, Systems and Test Labs in Seattle, or Tukwila, Washington. This role will have passion, creativity, and an insatiable desire for process improvement and efficiency. We need highly responsible professionals committed to upholding the highest standards of safety, quality, and integrity.
 
Manufacturing Engineers are owners of the build plan and ensure compliance to design configuration, build plan, and process requirements, Manufacturing Engineering performs Design for Manufacturing and Assembly (DFMA) analysis and develops an integrated build plan consisting of work instructions for assembly/fabrication, kitting, tooling, inspection requirements, and other outputs to endure fabrication meets design, test, and program requirements.
 
Position Responsibilities:
• Develops and implements production and tooling methodologies
• Participates on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines
• Develops, identifies and implements conceptual designs and maintains the program architecture for build
• Leads and implements manufacturing plans
• Conducts producibility and variation analyses to ensure that manufacturing process capability matches requirements
• Leads in providing producibility information for inclusion in project plans and helps document producibility best practices
• Analyzes design/build concepts to evaluate producible design/build definitions
• Resolves technical problems of significant impact to performance, cost or schedule
• Coordinates and implements new engineering principles, theories, advanced technologies and concepts
• Validates and ensures production readiness of solutions to complex problems. Implements lean principles and technologies
 
Required Skills:
• Bachelor, Master or Doctorate of Science degree required from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry is required.
• Knowledge with electrical/mechanical manufacturing process and assembly sequencing
• Prior experience working on Boeing Manufacturing System
• Experience with using manufacturing tools (PDM, CAPP, CMES, MESci, EPARTs, GOLDesp)
 
Preferred Skills:
• 3 + years of experience working in a production and/or manufacturing environment
• 3 + years of experience leading or managing projects and/or teams
• 3 + years of experience in a Manufacturing Engineering role
• Experience with space or military electronics
• Experience in Project management
• Experience in Work Package Estimating
 
Company DescriptionKronos always provides our partners with 100% customer satisfaction and on time delivery. If you are excited about working for a company that takes its job seriously and does not cut corners you will have a home with Kronos. 
<h3>Company Description</h3>
Kronos always provides our partners with 100% customer satisfaction and on time delivery. If you are excited about working for a company that takes its job seriously and does not cut corners you will have a home with Kronos.

Manufacturing Engineer (Electronics / Electrical)

Millwright (1st Shift)

<h3>Job Description</h3>
Job Description
Role: I&amp;E Technician (Nightshift)
Our Vision: RigUp is where the best workers power the world’s most successful projects. We are united by a common mission: to deliver services and technology that fundamentally change how skilled workers and the businesses they serve get hard work done.
Job Description
Installs and maintains electrical and instrument equipment in compliance with all applicable rules and practices. Tests and repairs electrical and instrumentation systems used in production equipment to ensure performance standards and product quality are maintained. Evaluates systems to develop repair strategies and documents actions taken.
Responsibilities
<ul>
<li>Plan and oversee activities within assigned areas in accordance with laws, regulations, standards, and procedures, emphasizing health, safety, and the environment</li>
<li>Support collaboration between operations, engineering, and projects teams</li>
<li>Review and contribute to control specifications and work practices</li>
<li>Manage assigned electrical and control systems per the Work Management Manual</li>
<li>Apply and follow work permits through the Permit To Work System (PTWS)</li>
<li>Ensure timely and high-quality completion of work scheduled by the Maintenance Program</li>
<li>Develop and maintain personal and team technical skills</li>
<li>Participate in and provide technical instruction in meetings to ensure up-to-date knowledge on codes, technology, and procedures</li>
<li>Maintain open communication on electrical and control issues</li>
<li>Support work prioritization to increase team effectiveness</li>
<li>Provide technical maintenance and troubleshooting support on instrument and electrical systems</li>
<li>Generate and follow up on Management of Change requests (MOCs) related to electrical/control systems and installations</li>
<li>Inspect and recommend improvements to new installations</li>
<li>Serve as backup for the Instrument and Electrical Lead position as needed</li>
</ul>
Skills and Qualifications
<ul>
<li>5 years of experience in maintaining electrical systems and I&amp;C in processing or offshore production facilities</li>
<li>Preferred background in powerline maintenance (Lineman/Journeyman), with experience at 25KV and 125KV voltages</li>
</ul>
General Technical Skills
<ul>
<li>Knowledge of regulations governing oil and gas facility operations</li>
<li>Familiarity with OIMS systems, manuals, and procedures</li>
</ul>
Specific Technical Skills
<ul>
<li>Completion of safety, administrative, and technical training per company-approved training roadmap</li>
<li>Demonstrated competencies per Operations Integrity Critical competency requirements</li>
<li>Proficient in computing and technical documentation</li>
</ul>
Position Details: Pay Rate: $65/hr (W2) Hitch: 7/7 or 8/6 - Night shift Location: Midland, TX
Truck and tools provided
Company DescriptionRigUp is where the best workers power the world’s most successful projects. We are united by a common mission: to deliver services and technology that fundamentally change how skilled workers and the businesses they serve get hard work done. 
<h3>Company Description</h3>
RigUp is where the best workers power the world’s most successful projects. We are united by a common mission: to deliver services and technology that fundamentally change how skilled workers and the businesses they serve get hard work done.

I&E Technician

<h3>Job Description</h3>
Job Description
Job Title: Production Management Specialist (PMS) (5) Location: Robins Air Force Base, Georgia Company: Lucayan Technology Solutions LLC Clearance: Active Secret Clearance Required Employment Type: Full-Time – Contingent on contract award.
Lucayan Technology Solutions LLC is seeking an experienced Production Management Specialist (PMS) to support the 638th Supply Chain Management Group (SCMG) at Robins Air Force Base. This role provides critical assistance to Government Supply Planners in managing organic and contract repair programs for Air Force supply operations. The PMS will help forecast budgets, oversee repairs, manage contracts, and provide subject matter expertise across a variety of logistics and production systems. This is a full-time position contingent upon contract award.
Job Responsibilities:
Production Management Duties:
<ul>
<li>
Support Government planners with organic and contract repair efforts.
</li>
<li>
Manage asset shipment tracking, repair predictions, and budget allocation activities.
</li>
<li>
Assist in forecasting repair budgets and developing Repair Budget Narratives and Program Execution inputs.
</li>
<li>
Oversee production efforts and component deliveries to meet performance goals.
</li>
<li>
Support negotiation and workload planning activities across supply programs.
</li>
<li>
Provide contract oversight, including expiring contracts and closeout processes.
</li>
<li>
Assist with temporary work orders and MISTR Line establishment using G004L.
</li>
<li>
Monitor depot-level repair efforts and priorities using EXPRESS and DREP systems.
</li>
<li>
Prepare and process repair Purchase Instrument packages via the PRPS system.
</li>
<li>
Maintain file integrity within the Automated Budget Control System (ABCS).
</li>
<li>
Utilize ESCAPE/SPM (Servigistics) and other logistics systems to support accurate planning.
</li>
<li>
Leverage CAV-AF, MP&amp;E, and CRMS tools for visibility, planning, and execution of repairs.
</li>
<li>
Act as a subject matter expert and mentor to less experienced production management staff.
</li>
</ul>
Essential Qualifications:
Security Clearance: Must possess an active Secret security clearance.
Experience:
<ul>
<li>
Minimum of 8 years of experience in Air Force supply chain and production management.
</li>
<li>
Prior experience in roles focused on organic and contract repair.
</li>
<li>
Proficiency in Air Force logistics systems such as ESCAPE/SPM, EXPRESS, ABCS, and G004L.
</li>
<li>
Strong background in budget forecasting, program management, and contract oversight.
</li>
</ul>
Education:
<ul>
<li>
Bachelor’s degree in a related field required.
</li>
</ul>
Skills:
<ul>
<li>
Deep understanding of repair lifecycle management and Air Force maintenance programs.
</li>
<li>
Excellent organizational and documentation skills, particularly with budget and repair narratives.
</li>
<li>
Ability to coordinate across teams and serve as a reliable point of expertise.
</li>
<li>
Strong communication and systems proficiency in a government support environment.
</li>
</ul>
Why Join Lucayan Technology Solutions LLC?
<ul>
<li>
Play a key role in sustaining mission-critical Air Force readiness.
</li>
<li>
Join a skilled team dedicated to performance, accountability, and innovation.
</li>
<li>
Support national defense logistics from one of the Air Force’s premier supply chain hubs.
</li>
<li>
Competitive compensation, benefits, and professional development opportunities.
</li>
</ul>
Apply today to support Air Force repair and production initiatives at Robins AFB with Lucayan Technology Solutions LLC.
Powered by JazzHR
jGyXbZoYT4

6,620 Manufacturing Jobs in Anderson County