<h3>Job Description</h3>
Job Description
Direct Electric Services is an established commercial electrical contractor looking for seasoned apprentices, foremen, and mechanics to join our team of professionals. We perform commercial work in and around the Washington DC metro area.
Our Electricians are required to possess the following:
<ul>
<li>Maintain current Journeyman electrician's license or four years of an approved apprenticeship program with a minimum of 5 years of documented on the job training.</li>
<li>Be proficient in the use of the Electrical Code book including interpretation of tables, calculations, and an application of the code in daily activities.</li>
<li>Plan layout and installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes.</li>
<li>Should have good math skills, as they will need to take measurements, perform lighting and equipment layout and work with numbers.</li>
<li>Repair or replace wiring, equipment, or fixtures, using hand tools or power tools.</li>
<li>Test electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures, using testing devices, such as ohmmeters, voltmeters, or oscilloscopes, to ensure compatibility and safety of system.</li>
<li>Use a variety of tools or equipment, such as power construction equipment, measuring devices, power tools, and testing equipment, such as ammeters, VOM, Megger.</li>
<li>Work from ladders, scaffolds, or roofs to install, maintain, or repair electrical wiring, equipment, or fixtures.</li>
<li>Assemble, install, test, or maintain electrical or electronic wiring, equipment, appliances, apparatus, or fixtures, using hand tools or power tools.</li>
<li>Connect wires to circuit breakers, transformers, motors, or other components.</li>
<li>Diagnose malfunctioning systems, apparatus, or components, using test equipment and hand tools to locate the cause of a breakdown and correct the problem.</li>
<li>Inspect electrical systems, equipment, or components to identify hazards, defects, or the need for adjustment or repair, and to ensure compliance with codes.</li>
<li>Prepare sketches or follow blueprints to determine the location of wiring or equipment and to ensure conformance to building and safety codes.</li>
<li>Fasten small metal or plastic boxes to walls for electrical switches or outlets.</li>
<li>Place conduit, pipes, or tubing, inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.</li>
<li>Perform physically demanding tasks, such as digging trenches either by hand or with machinery to lay conduit in the earth.</li>
<li>Be proficient with fire alarm system installation and maintenance.</li>
<li>Construct and fabricate parts, using hand tools and specifications.</li>
<li>Advise management on whether continued operation of equipment could be hazardous.</li>
<li>Journeyman electricians will also need to be able to read blueprints, work in small spaces and lift heavy equipment.</li>
</ul>
If your abilities meet or exceed the list above, go to our web site <a href="http://www.directelectricservices.com" target="_blank">www.directelectricservices.com</a> and apply online.
Company DescriptionDirect Electric Services is an established electrical commercial contractor that has been in business for 30+ years. Direct Electric Services is a company where employee performance is acknowledged and rewarded accordingly. Our organization prides itself on our integrity, reputation, and strong relationships with all of our customers and employees. We provide individual opportunities for growth within our company structure. Direct Electric Services understands that the company can only be as good as its employees, and we value all members of our team. We perform our work in the DC and Baltimore metro area. 
<h3>Company Description</h3>
Direct Electric Services is an established electrical commercial contractor that has been in business for 30+ years. Direct Electric Services is a company where employee performance is acknowledged and rewarded accordingly. Our organization prides itself on our integrity, reputation, and strong relationships with all of our customers and employees. We provide individual opportunities for growth within our company structure. Direct Electric Services understands that the company can only be as good as its employees, and we value all members of our team. We perform our work in the DC and Baltimore metro area.

Electrician Commercial Mechanics

<h3>Job Description</h3>
Job Description
Overview
Role: Floor Tech
Join Healthcare Services Group (HCSG) as a Floor Tech, where you will play a vital role in maintaining the cleanliness and appearance of floors in a long-term care facility. At HCSG, we are passionate about positively impacting the communities we serve. If you share our commitment to excellence and enhancing customer and resident experiences, join us and make a difference!
 
Responsibilities
<ul>
<li>Perform floor care tasks, including cleaning, buffing, and refinishing floors in resident rooms, common areas, and offices.</li>
<li>Operate floor care equipment safely and efficiently.</li>
<li>Maintain records of floor care activities and report any maintenance or safety issues to the supervisor.</li>
<li>Follow infection control and universal precautions policies to ensure a sanitary environment.</li>
<li>Interact positively with residents, staff, and guests, providing excellent customer service.</li>
<li>All other duties as assigned.</li>
</ul>
 
Qualifications
<ul>
<li>High school diploma or equivalent preferred.</li>
<li>Previous floor care experience is preferred but not required.</li>
<li>Maintain a positive attitude and effectively communicate with building occupants, administration, and HCSG leadership to perform daily tasks.</li>
<li>Compliance with COVID-19 vaccination policies</li>
<li>Must be able to lift/carry a maximum of 50 pounds, push/pull a maximum of 50 pounds, stand, sit, bend and walk for extended periods. </li>
<li>Must be able to perform routine, repetitive tasks continuously.</li>
<li>Must be able to work around food and cleaning products.</li>
<li>Able to follow oral and written instructions, and perform routine, repetitive tasks daily.</li>
<li>Residency within the service area required</li>
</ul>
Ready to Join Us?
If you're looking for a role where you can contribute to a clean and welcoming environment and be part of a supportive and dedicated team, apply now and start making a difference at HCSG!

Floor Tech

<h3>Job Description</h3>
Job DescriptionProject Manager - Engineering &amp; Construction
Location: Juno Beach, FL | Contract: 8 Months | Rate: $79/hour
 Overview
Our client, a leading energy company, is seeking an experienced Project Manager to oversee large-scale engineering and construction projects valued between $200M-$1.5B. This is an exceptional opportunity to lead cross-functional teams through complex energy infrastructure projects from field execution through commissioning and startup.
 Key Responsibilities
<ul>
<li>Lead all aspects of project execution for major energy infrastructure projects</li>
<li>Manage cross-functional teams including Development, Engineering, Procurement, and Construction</li>
<li>Oversee safety management, contract administration, and regulatory compliance</li>
<li>Drive cost management, schedule optimization, and quality assurance</li>
<li>Lead commissioning and startup activities for new facilities</li>
<li>Serve as primary company representative with regulatory agencies and stakeholders</li>
<li>Approve payments and change orders with unlimited authorization authority</li>
<li>Coordinate supplier/vendor relationships for cost reduction initiatives</li>
<li>Manage project documentation, reporting, and stakeholder communications</li>
</ul>
 Requirements
<ul>
<li>Bachelor's degree in Mechanical, Electrical, or related engineering discipline</li>
<li>3+ years managing engineering projects from design through implementation</li>
<li>Proven experience leading cross-functional teams and multiple stakeholders</li>
<li>Strong project management fundamentals (scope, schedule, budget, risk)</li>
<li>Understanding of engineering design processes and technical specifications</li>
<li>Proficient in Microsoft Office Suite</li>
<li>Excellent communication and analytical skills</li>
<li>Valid driver's license with clean driving record</li>
<li>Experience with Solar PV and/or Battery Energy Storage Systems preferred</li>
</ul>
 Benefits
<ul>
<li>Competitive hourly rate of $79/hour</li>
<li>8-month contract with potential for extension</li>
<li>Work with cutting-edge renewable energy technologies</li>
<li>Lead high-impact, multi-million dollar projects</li>
<li>Join a leading energy company driving the clean energy transition</li>
</ul>

Project Manager - Engineering & Construction (E&C)

<h3>Job Description</h3>
Job Title: Lead Design Engineer
Location: San Diego county, California
 
Aircraft Structural Design – Wing / Fuselage
 
Role Summary
Tata Technologies is seeking a Lead Designer to drive the structural design and integration of fuselage and wing components for utility aircraft using 3DEXPERIENCE tools. The role requires strong technical expertise in metallic and composite structures, weight optimization, and manufacturability, while ensuring compliance with aerospace certification standards. The Lead Designer will collaborate closely with cross-functional teams spanning stress analysis, manufacturing, and certification to deliver robust, efficient, and certifiable structural solutions.
 
Dimension of Function 
<ul>
<li>Accountable for leading the design and development of fuselage and wing structures using CATIA V5 and 3DEXPERIENCE platforms. Applies advanced knowledge of metallic and composite materials to achieve structural integrity, weight reduction, and cost efficiency while ensuring compliance with aerospace standards throughout the design, validation, and certification lifecycle.</li>
<li>Works in close coordination with design, stress, manufacturing, and certification teams. Interfaces with project leads, suppliers, and regulatory authorities to ensure alignment, timely delivery, and compliance with program requirements.</li>
</ul>
 
Area of Responsibility
<ul>
<li>Lead structural design activities for fuselage and wing assemblies under multiple load cases.</li>
<li>Author, review, and approve CAD models, drawings, and design documents ensuring compliance and manufacturability.</li>
<li>Collaborate with Stress Analysis team to validate and refine structural concepts.</li>
<li>Drive design optimization for weight reduction, performance improvement, and cost-effectiveness.</li>
<li>Apply expertise in metallic and composite materials to achieve efficient, durable, and certifiable structures.</li>
<li>Conduct quality checks of design deliverables to ensure accuracy and adherence to standards.</li>
<li>Interface with certification authorities to align with FAR 23 &amp; FAR 27 requirements.</li>
<li>Support prototype build, ground tests, and flight test campaigns to confirm design intent.</li>
</ul>
 
Knowledge / Experience 
<ul>
<li>10+ years of experience in aerospace structural design.</li>
<li>Bachelor’s degree in Aerospace / Mechanical Engineering</li>
<li>Strong proficiency in CATIA V5, ENOVIA, and 3DEXPERIENCE.</li>
<li>Well versed with composite modelling best practices and design principles.</li>
<li>Deep understanding of both composite and metallic structures.</li>
<li>Hands-on experience in structural weight optimization and material trade-offs.</li>
<li>Familiarity with aerospace certification standards (FAR 23 &amp; FAR 27).</li>
<li>Exposure to eVTOL or UAV platforms is an advantage.</li>
</ul>

Structural Design Engineer

<h3>Job Description</h3>
Job Description
We own a chain of restaurants in Arizona,&nbsp;
we are looking for an experience HVAC tech must be EPA certified.
you will be working on walk-in coolers, walk-in freezers under counter Coldwell’s.
Standup freezers, standup coolers
ventilation equipment
Company DescriptionWe are PAK Foods, we own and operate 50 fast food locations in Arizona alone. Along with 100 + locations across 4 states. We are a service company that just so happens to own the building and equipment that we are servicing. We have an in house maintenance team that handles everything. 
<h3>Company Description</h3>
We are PAK Foods, we own and operate 50 fast food locations in Arizona alone. Along with 100 + locations across 4 states. We are a service company that just so happens to own the building and equipment that we are servicing. We have an in house maintenance team that handles everything.

HVAC Technician

<h3>Job Description</h3>
Job Description
Bash Excavating is looking to hire a new operator. We are a small company that does a lot of site work and site utilities.
YOU WILL BE ASKED TO DO:
<ul>
<li>Set up lasers </li>
<li>check grade</li>
<li>cut grade</li>
<li>final grade</li>
<li>load trucks</li>
<li>dig a clean and safe ditch</li>
<li>install piping</li>
<li>set precast products.</li>
</ul>
YOU MUST HAVE:
<ul>
<li>Drivers License</li>
<li>Vehicle</li>
<li>Basic Knowledge of Grading</li>
<li>Basic Knowledge of Site Utilities</li>
<li>Pass a Drug Screening</li>
<li>Mechanically Inclined</li>
<li>3 Years Experience in Operating.</li>
</ul>
EQUIPMENT YOU WILL HAVE TO RUN:
<ul>
<li>Track loader</li>
<li>Excavator</li>
<li>Backhoe</li>
<li>Dozer </li>
<li>Roller</li>
<li>Scrapers.</li>
</ul>
Company DescriptionBash Excavating is a 3rd generation family owned business that is quickly growing. 
<h3>Company Description</h3>
Bash Excavating is a 3rd generation family owned business that is quickly growing.

Equipment Operator - Urgently Hiring!!!

<h3>Job Description</h3>
Mackie Consultants, LLC is a full-service Engineering Firm providing a full array of Civil Engineering, Land Surveying, and Constructions Services. Mackie Consultants provides services for many residential, commercial, industrial, institutional, and municipal clients.
 
Each summer Mackie welcomes promising students from top-ranked engineering schools and universities to join its class of summer interns. The Mackie Intern Program nurtures the curiosity of its interns and provides a summer of engaging engineering experiences to help them begin the transition from academics to their profession. Weekly visits to different job sites provide front-row access to multidisciplinary engineering projects and gives interns a unique opportunity to explore career interests. Interns also train on the latest available industry software and work with engineer mentors who model professional skills, networking know-how, and career success in the civil engineering field.
 
Imagine how a hands-on summer learning experience, technical skills training, and professional, caring mentors can impact your future. Come join us at Mackie Consultants.
It is anticipated that your internship will include working approximately 40 hours per week, or as otherwise mutually agreed upon. Our Intern Program includes but is not limited to:
<ul>
<li>Mentoring Program</li>
<li>Software Training</li>
<li>Weekly Site Visits</li>
<li>Toastmasters Training</li>
</ul>
 
Mackie Consultants, LLC is an Equal Opportunity Employer It is the policy of Mackie Consultants, LLC to provide equal employment opportunity without regard to race, color, age, religion, sex, sexual orientation, national origin, marital status, changes in marital status, pregnancy, childbirth, or medical or common conditions related to pregnancy or childbirth, parenthood, creed, veteran’s status, veteran’s disability and physical or mental disability, citizenship status or unfavorable discharge from the military. Mackie Consultants, LLC intends that all matters related to recruiting, hiring, training, compensation, benefits, promotions, transfers, terminations and layoffs and recalls, as well as all Mackie Consultants, LLC sponsored social and recreational programs, and all treatment on the job, be free of unlawful discriminatory practices.

Civil Engineering Intern (Summer 2026)

<h3>Job Description</h3>
Job Description
Select Comfort Systems is currently hiring for a full-time Boiler Service Technician - Boiler Technician to troubleshoot and repair our customers' residential and commercial HVAC units, boilers, and associated systems in the West Valley City, UT area. This HVAC position typically works a flexible schedule that includes 8-hour shifts with on-call duties. We pay our Boiler Service Technician - Boiler Technicians a competitive hourly pay of $28.00 - $35.00 per hour. Don't let us forget to mention we are providing a $3,000 signing bonus, paid after 90 days of employment.
In addition to competitive pay and our exceptional culture, we offer our technicians the following benefits:
<ul>
<li>100% employer-paid health and dental insurance, life, vision, and paid time off (PTO)</li>
<li>401(k) with company match</li>
<li>Company vehicle</li>
<li>Cell phone reimbursement</li>
<li>Referral incentives</li>
<li>Tuition reimbursement</li>
</ul>
Additionally, we provide a flexible spending account and paid tuition
So, now that you've learned the who, what, where, and why, you may be wondering HOW? It's easy! Just fill out our initial mobile-friendly online application. We hope to meet you soon!
 
ABOUT SELECT COMFORT SYSTEMS
At Select Comfort Systems we are focused on exceeding the expectations of our customers when it comes to their residential and commercial HVAC needs. We pride ourselves in providing reliable HVAC solutions and exceptional work in the Salt Lake and Park City areas. Whether we are servicing or installing our customers' heating and cooling systems, or simply completing routine maintenance, we do everything with professionalism and expertise. Our customers feel comfortable and confident with the services and products we provide.
Our success as a company is solely dependent on our trained employees who take personal ownership of their work and seek to outshine the rest in all that they do. We want our team to feel supported and encouraged to grow in their careers, so we are happy to provide continual learning experiences as well as excellent pay and benefits! Our upbeat and professional work environment means our employees enjoy coming to work each day and desire to contribute to the team.
 
OUR IDEAL BOILER SERVICE TECHNICIAN - BOILER TECHNICIAN
<ul>
<li>Career-minded - Looking for more than just a job</li>
<li>Dependable - Reliable, shows up on time and prepared</li>
<li>Takes pride in your work - Pays close attention to detail and goes above and beyond</li>
<li>Team player - Works well with others</li>
<li>Respectful - Treats others with kindness and dignity</li>
</ul>
If this sounds like you, keep reading!
 
REQUIREMENTS FOR A BOILER SERVICE TECHNICIAN - BOILER TECHNICIAN
<ul>
<li>Experience in installation, maintenance, troubleshooting, and correcting diverse HVAC service issues. (including electrical experience). Prefer 5+ years experience.</li>
<li>Good analytical skills are required to troubleshoot and problem-solve complicated HVAC systems/equipment problems. </li>
<li>Excellent customer service skills with a desire to exceed customer expectations.</li>
<li>Mechanical skills are required in the execution of complicated HVAC systems/equipment solutions.</li>
<li>Skilled at reading and interpreting blueprints, plans, and manuals.</li>
</ul>
Two years of technical school, community college, or trade school is preferred. If you meet the above requirements, we need you. Apply today to join our team as a Boiler Service Technician - Boiler Technician!
Location: 84119

Boiler Service Technician - Boiler Technician

<h3>Job Description</h3>
Job Description
General Carpenter
Choice Construction Group, LLC
Choice Construction Group is hiring a General Carpenter to train and grow into a Lead Carpenter/Site Superintendent. We are a General Contractor performing both Commercial Projects/TI’s and full-scale residential home renovations/custom builds.
We are looking for dedicated team members that are interested in an opportunity to grow within our company. We are an employee first company and believe that employees are critical to the success of the company. Must be driven, reliable and respectful.
Requirements &amp; Responsibilities 
· Ability to read and understand basic drawings / details
· Ability to use general power tools
· Attention to project site and company employee safety programs
· Carpentry skills preferred may consist of; framing, siding, windows/doors, casework
· Reliable vehicle (allowance &amp; fuel negotiable to right candidate)
Job Type: Full-Time
Salary: $27-$40/hour Depending on Experience
Medical: After Six Months
PTO: 1 Week After Six Months Additional PTO Based on Time with Company, Paid Holidays
Required Experience:
<ul>
<li>Construction: 2 years (Required)</li>
<li>Carpentry: 2 or more years (Required)</li>
</ul>
Work Location:
<ul>
<li>Seattle and surrounding areas</li>
</ul>
Company DescriptionCCG specializes in Commercial and Residential work. 
<h3>Company Description</h3>
CCG specializes in Commercial and Residential work.

10,630 Construction Jobs in Maricopa County