Electronics Tester 2 - 2nd Shift

Job Description

Job Description

GENERAL PURPOSE OF THE JOB: Test at the next level of acceptance testing. Some examples are Automated/ Manual Test Stations and Sub Testing with troubleshooting to board and component level. Other examples include also performing first level testing like Hi Pot and Ground Continuity (both manual and automated).

ESSENTIAL DUTIES, RESPONSIBILITIES & AUTHORITIES include the following. Other duties may be assigned.

• Test using various equipment (i.e., scopes, meters, signal generators, power sources, etc.)
• Be able to find and understand associated technical procedures needed.
• Identify pass / fail conditions.
• Ability to navigate computer functions.
• Record data.
• Read a detailed schematic for troubleshooting purposes.
• Perform board and component level troubleshooting.
• Maintenance of test equipment and test station.

SUPERVISORY RESPONSIBILITIES & AUTHORITIES: This job has no supervisory responsibilities.

QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position.

EXPERIENCE: Three to six years of related experience and/or training (or equivalent combination of education, training and experience)

EDUCATION: Associate’s Degree or equivalent from two-year college or technical school

LANGUAGE SKILLS: Ability to write routine reports and correspondence. Ability to speak effectively after groups of customers or employees of organization.

COMPUTER SKILLS: Advanced skills: Ability to use internet/intranet, cross functional Enterprise Resource Planning software, the MS Office package, and other software programs and packages to their potential to provide a work product fitting to the level of the position. Must also be able to perform troubleshooting

MATHEMATICAL SKILLS: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY: High Skills: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

OTHER QUALIFICATIONS:

• Must pass Electrical Safety Training
• Must pass Technician Electrical / Testing knowledge test

PHYSICAL DEMANDS: The following are physical labor characteristics associated with this job.

• Standing – 1/3 – 2/3 of day
• Walking – 1/3 – 2/3 of day
• Sitting – 1/3 – 2/3 of day
• Using hands to handle or feel – over 2/3’s of day
• Reaching with hands and arms – 1/3 – 2/3 of day
• Kneeling or crouching – Under 1/3 of day
• Talking or hearing - over 2/3’s of day
• Tasting or smelling – Under 1/3 of day

Amount of time spent lifting:

• Up to 10 lbs – Over 2/3 of day
• Up to 25 lbs – – 1/3 to 2/3 of the day
• Up to 50 lbs – Under 1/3 of day

Vision Requirements

• Very Close vision (clear vision at 10 inches or less)
• Close vision (clear vision at 10-20 inches)
• Color vision (ability to identify and distinguish colors)
• Peripheral vision (ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point)
• Depth perception (three-dimensional vision, ability to judge distances and spatial relationships)
• Ability to adjust focus (ability to adjust the eye to bring an object into sharp focus)

Please provide details on the specific job duties that require the physical demands selected above.

• Moving object to be tested, involves lifting, reaching, walking.
• Testing may involve sitting or standing, based on item being tested.
• Many work aids use color identifications.
• Vision to read documents and test equipment displays and screens.
• Peripheral and Depth vision needed for the safety aspect of testing with energized circuits.

WORK ENVIRONMENT: The following are characteristics associated with the environment in which this job is typically performed.

Moving mechanical parts –1/3 – 2/3 of the day

Risk of electrical shock – Over 2/3 of the day

Moderate noise (examples: business office with computers and printers, light traffic)

SALARY RANGE

The starting hourly rate for the role is between USD $22.00 and $27.00. The actual base is dependent upon many factors, such as training, transferable skills, work experience, business needs, market demands. The base pay range is subject to change and may be modified in the future. The role may also be eligible for variable bonus programs and benefits.

ABOUT TDK-LAMBDA AMERICAS INC.

Acquired by TDK in 2008, TDK-Lambda Americas Inc. represents the culmination of three well-established North American power manufacturers: Electronic Measurements Inc., Lambda Electronics, and Innoveta Technologies. We have earned the reputation of being a trusted world-class organization through a history of providing reliable and innovative power supplies. Our broad product offering features over 6,000 models that are suited for many applications, including medical, industrial, broadcast, defense, factory automation, and LED/LCD signage. Our view is that "power supply" is more than just an electronic device, but the heart of our customer's systems. This belief has helped us become a global leader in our industry.

We employ approximately 300 people in our engineering, manufacturing, and sales offices across the United States. At our company, we value the work and ideas of our employees. They are encouraged to express their opinions and take the initiative, which has helped with the growth of our community and kept us at the cutting edge of new technologies. We offer our employees not only a career opportunity but also an environment that allows them to succeed.

TDK-Lambda Americas offers great benefits and perks, including healthcare benefits, a 401(k) with match, paid time off (PTO), educational assistance, recognition plans, service awards, and performance-based awards.

To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. TDK-Lambda Americas is an Equal Opportunity, Affirmative Action Employer and is committed to the full inclusion of all qualified individuals. In keeping with that commitment, we will take the steps to assure that people with disabilities are provided reasonable accommodations to perform the essential functions of the position.