Manufacturing Engineer II (Saint Paul, Minnetonka Austin, Minnesota)

Job Description

Job Description:\n\n*******LOCAL CANDIDATE ONLY OR OPEN TO RELOCATE TO Minnetonka, MN****NO C2C CANDIDATES************* Job title -Manufacturing Engineer Location - Saint Paul, MN (100% on-site role) Pay Rate : 40k/Ann- 58k/Ann Job id - Sedaa 44365 Description: This position works out of our Minnetonka MN location in Electrophysiology (EP) business. Individuals in this role will work on a new product launch supporting the operations team as a 1st shift Manufacturing Engineer working with assemblers, and leading technicians on troubleshooting equipment and investigating process issues. Additionally, this position will support projects aimed towards designing and developing manufacturing processes, tooling, and fixtures to meet daily production schedules while enhancing productivity and product quality. This individual will have a unique opportunity to make a mark on the organization, while working on state-of-the-art product. What You’ll Work On Front line Manufacturing Engineer supporting Operations team in a clean room environment; Support products which include new production equipment, process improvements and cost reductions while supporting new product introductions Lean manufacturing processes, techniques and best practices and support Operations team in coaching assemblers through daily activities and training certifications Instruct production personnel in the manufacturing and testing of product devices Recommend and implement process, tooling, equipment changes for improving safety, quality, delivery and cost Interpret test data, analyze product performance, develop summaries, and assist in the initiation of yield improvements Daily troubleshooting of safety, quality or process issues Perform scrap dissection and lead investigation into potential root causes Summarize information to communicate across shifts and with other functional areas, and reporting to leadership team Individual should: Be innovative, resourceful, and work with minimal direction Have excellent organization, problem solving, communication, and collaboration skills Work effectively with cross-functional teams Exercise technical knowledge to support achievement of business objectives through launch of the product, volume ramp and yield improvement, which will require setting direction, leading, and taking ownership of complex manufacturing engineering technical tasks with multiple inter-coordinating elements Anticipate and identify key issues, understand impact and make recommendations for resolution which remain compliant with Quality System requirements Obtain peer review and manager review to confirm rationale for the approach is appropriate Support all Company initiatives as identified by management and in support of Quality Management Systems (QMS), Enironmental Management Systems (EMS), and other regulatory requirements. Complies with U.S. Food and Drug Administration (FDA) regulations, other regulatory requirements, Company policies, operating procedures, processes, and task assignments. Maintains positive and cooperative communications and collaboration with all levels of employees, customers, contractors, and vendors. Shift (Beginning) 1st Shift: Mon - Thurs, Approximately 5:00AM – 3:30 PM (precise times may be shifted to accommodate other shift schedules, early shift support or other project work) This position will begin as a 1st shift role but may later switch to second shift (3:30PM - 2:00AM). Ideal candidate will be able to flex across both shifts for training, cross-shift coverage when needed or alignment for future line support needs. Candidates who cannot flex will still be considered, however the ability to flex is a strong plus. Additionally, while shifts are 10hrs, Mon-Thurs, there is a strong opportunity for Overtime on Fridays & Saturdays and ability to support is desired. Required QualificationsThe individual will typically have had 2-5 years experience in an engineering discipline or advanced education to achieve the level of skill. Bachelor Science or Bachelor Engineering in Electrical, Mechanical or Biomedical Engineering or similar is desired. Curriculum training will be provided to ensure understanding of Quality System requirements required to perform assignments. This position is NonExempt. Hours over 40 will be paid at Time and a Half. *******LOCAL CANDIDATE ONLY OR OPEN TO RELOCATE TO Saint Paul, MN****NO C2C CANDIDATES************* Job title -Manufacturing Engineer Location - Saint Paul, MN (100% on-site role) Pay Rate : 40k/Ann- 62k/Ann Job id - Sedaa 44210 Description: Selected Candidate will start ASAP after screenings have cleared. Top Skills:Excellent documentation skillsHigh attention to detailGeneral mechanical engineering knowledge with the ability to quickly step into the initiative after trainingExcellent documentation and execution skillsEducation: Bachelor Science or Bachelor Engineering, Electrical, Software, or Mechanical Engineering.Experience: 3-5 years Prior experience preferred WHAT YOU’LL DOReview documentation of procedures and ensure proper execution of protocols and SOPs as part of the site’s integration into Abbott.Support the maintenance of controlled process documentation, including work instructions, process flow diagrams, gap analysis, control plans, and risk‑management documentation.Exercise knowledge of technical skills and understanding of the business objectives, manufacturing operations and dynamics of the company's environment to take an effective and proactive leadership role in a specific technical manufacturing discipline.Set direction for, lead, and take ownership of complex manufacturing engineering technical tasks that may have multiple inter-coordinating elements.Expectation that the individual will be able both to anticipate and identify key issues and make recommendations for resolution where precedent may not exist and creative thinking is required.Resolution may involve the application of new methods and approaches and may require the consideration of impact with other system components.Interaction with peers and mentors on the individual's projects is generally in the context of peer review to confirm the rationale for task approach direction as well as peer review of verification/validation activities. *******LOCAL CANDIDATE ONLY OR OPEN TO RELOCATE TO PLYMOUTH, MN****NO C2C CANDIDATES************* Job title -Manufacturing Engineer Location - Austin, TX (100% on-site role) Pay Rate : 40k/Ann- 68k/Ann Job id - Sedaa43310 Description: Key ResponsibilitiesHigh Priority: Plan, implement, and manage engineering projects for automated assembly lines, including development, build, testing, commissioning, and validation.High Priority: Manage complex automation engineering projects and new product development across multiple global sitesDrive activities with equipment suppliers to ensure successful production start-up and scale-up.Lead design, planning, and sustaining of automated manufacturing systems.Ensure adherence to quality, regulatory, and corporate standards; report progress against timelines.Identify and escalate risks impacting project delivery, product quality, or safety.Interface with cross-functional teams including R&D, Quality, Regulatory, and Operations.Develop and implement innovative solutions and manage engineering changes.Conduct complex engineering studies, analyze data, and prepare technical reports.Create process documentation and technical procedures for medical device equipment.Perform root cause analysis and implement corrective actions for yield and cycle time issues.Travel up to 10% (primarily Europe and U.S.) for project-related activities. High Priority Qualifications:Prior experience in medical device or pharmaceutical environments (FDA/cGMP/ISO regulated).Strong knowledge of automation systems, validation lifecycles, and high-volume manufacturing lines.Excellent project management, communication, and problem-solving skills. Qualifications:Bachelor’s degree in Engineering/Manufacturing or related discipline (Automation/Electronics/Mechatronics preferred).Minimum 5+ years of progressive technical experience; experience with automated manufacturing processes preferred.Ability to work independently and in a fast-paced, team-oriented environment.Familiarity with equipment software, pneumatics, electronics, vision systems, lasers, and GAMP guidelines. *******LOCAL CANDIDATE ONLY OR OPEN TO RELOCATE TO PLYMOUTH, MN****NO C2C CANDIDATES************* Job title -Manufacturing Engineer - I Location - Pomona, California (100% on-site role) Pay Rate : 30k/Ann- 40k/Ann Job id - Sedaa42880 Description: This position is Nonexempt. Hours over 40 will be paid at Time and a Half.Exercise knowledge of technical skills and understanding of the business objectives, manufacturing operations and dynamics of the company?s environment to take an effective and proactive leadership role in a specific technical manufacturing discipline.Set direction for, lead, and take ownership of complex manufacturing engineering technical tasks ? tasks that may have multiple inter-coordinating elements. Expectation that the individual will be able both to anticipate and identify key issues and make recommendations for resolution where precedent may not exist and creative thinking is required. Resolution may involve the application of new methods and approaches and may require the consideration of impact with other system components. Interaction with peers and mentors on the individual?s projects is generally in the context of peer review to confirm the rationale for task approach direction as well as peer review of verification/validation activities. Education:Bachelor Science or Bachelor Engineering, Electrical, Software, or Mechanical Engineering. Curriculum trains students in skills required to perform assignments. 0-3 years exp *******LOCAL CANDIDATE ONLY OR OPEN TO RELOCATE TO PLYMOUTH, MN****NO C2C CANDIDATES************* Job title -Manufacturing Engineer Location - Plymouth, MN ( (100% on-site role) Pay Rate : 40k/Ann- 60k/Ann Job id - Sedaa43048 Description: Non-Exempt position. Looking for 1 individual with an engineering background to support 1st shift medical device (catheter) production. The day-to-day for this role involved providing direct production support on the manufacturing floor – working with operators, investigating yield issues and catheter scrap, and collaborating with other functional teams to promote a strong operations environment.1st shift role ( 5:30 AM - 3:30 PM, Monday –Thursday) – some flexibility with coverage Front line engineer Direct production support in clean room 80%+ of day Responds to escalations from Operations (e.g. scrap, quality issues, process questions/suggestions, equipment errors) Building relationships and coaching Operators Scrap dissection and yield improvement Basic equipment troubleshooting Participate in ergonomic safety projects Background/Qualifications – Required: Local candidate (100% on-site role in Plymouth, MN) Bachelor’s degree in engineering Soft SkillsStrong verbal and written communication skills are a mustProactive / motivated and can work independentlyProblem solvingRelationship buildingPatience with varying personalities and cultures Preferred/Nice to Have:0-3 years of relevant experienceDirect production support (front line, day-to-day hands-on experience)Prior medical device experienceInternship experience, hands-on experience preferredTA work, tutoring, babysitting experience nice to have as it demonstrates coaching / teaching ability *******LOCAL CANDIDATE ONLY OR OPEN TO RELOCATE TO PLYMOUTH, MN****NO C2C CANDIDATES************* Job title -Manufacturing Engineer Location - Plymouth, MN ( (100% on-site role) Pay Rate : 40k/Ann- 60k/Ann Job id - Sedaa43047 Description: Looking for 2 individuals with an engineering background to support 2nd shift medical device (catheter) production. The day-to-day for this role involved providing direct production support on the manufacturing floor – working with operators, investigating yield issues and catheter scrap, and collaborating with other functional teams to promote a strong operations environment.2nd shift role (4 PM – 2 AM, Monday –Thursday) – some flexibility with coverageFront line engineerDirect production support in clean room 80%+ of dayResponds to escalations from Operations (e.g. scrap, quality issues, process questions/suggestions, equipment errors)Building relationships and coaching OperatorsScrap dissection and yield improvementBasic equipment troubleshootingParticipate in ergonomic safety projects Background/Qualifications: Required:Local candidate (100% on-site role in Plymouth, MN)Bachelor’s degree in engineeringSoft SkillsStrong verbal and written communication skills are a mustProactive / motivated and can work independentlyProblem solvingRelationship buildingPatience with varying personalities and cultures Preferred/Nice to Have:0-3 years of relevant experience o Direct production support (front line, day-to-day hands-on experience)Prior medical device experienceInternship experience, hands-on experience preferredTA work, tutoring, babysitting experience nice to have as it demonstrates coaching / teaching ability *******LOCAL CANDIDATE ONLY OR OPEN TO RELOCATE TO PLEASANTON, CA****NO C2C CANDIDATES************* Job title -Manufacturing Engineer - Labeling and Packaging Location - Pleasanton, CA ( fully onsite) Pay Rate : 50k/Ann- 80k/Ann Job id - Sedaa Our client is a global healthcare leader that helps people live more fully at all stages of life. Our portfolio of life-changing technologies spans the spectrum of healthcare, with leading businesses and products in diagnostics, medical devices, nutritionals and branded generic medicines. Our 113,000 colleagues serve people in more than 150 countries. JOB DESCRIPTION: Leading an active lifestyle is important to the many people we serve. In Abbott’s Heart Failure division, we’re advancing the treatment of heart disease through breakthrough medical technologies in heart failure, allowing people to restore their health and get on with their lives. We are seeking an experienced, high caliber Manufacturing Engineer onsite at our Pleasanton, CA location. This position will support labeling and packaging manufacturing processes in order to meet program milestones for the Labeling and Packaging Engineering team in the Heart Failure division. WHAT YOU’LL DODrive projects related to labeling or packaging initiatives including scheduling and leading cross functional reviews.Execute change orders in the Windchill product lifecycle management software impacting manufacturing process documentation, product BOM structure, product/component specification changes & improvementsUpdate manufacturing, packaging, and labeling processes to meet production demands while enhancing productivity and product quality.Support equipment maintenance and resolve production downtime for label printers and heat-s