field_job_occupational_field_parents_all

job_organization_name

field_job_employment_type

city

For over 60 years, Super-Pufft has been in the snack food business. Over the past two decades since the business was purchased by new ownership, Super-Pufft has grown from a small popcorn factory to having 3 state-of-the-art SQF certified facilities across Canada. The new owners brought their previous manufacturing experience and entrepreneurial nature to Super-Pufft.
Just a few years after purchasing the company, new product lines were added, to extend the range and volume of snack food offerings. The company has always been in tune with the dynamic of demand and capacity, and continues to innovate market winning products.
<h2>Certified Class 4 Power Engineer &amp; Mechanic</h2>
<h2>Airdrie, Alberta&nbsp; Canada</h2>
<h2>Contract to Full Time Opportunity</h2>
<h3>Your seat at the table </h3>
This position is accountable of the efficient installation, repair, and maintenance of high-speed food manufacturing machinery and equipment in a high-volume, fast- paced manufacturing environment.
HEAT EXCHANGER/UTILITIES
<ul>
<li>Ensure that all Alberta safety codes, procedures, policies, and regulations are followed.</li>
<li>Monitor alarms, gauges, and other instruments associated with plant operations and as per Alberta regulations.</li>
<li>Ensure that equipment and processes operate at maximum efficiency.</li>
<li>Maintain a daily log of operation, maintenance, and safety activities on the utilities systems.</li>
<li>Help and actively participate in safety activities.</li>
</ul>
MAINTENANCE
<ul>
<li>Complies 100% with safety regulations and maintains clean and orderly work areas.</li>
<li>Performs mechanic tasks including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines, baggers, conveyors, etc.</li>
<li>Troubleshoot and take corrective action to prevent equipment or system failures.</li>
<li>Perform daily maintenance and repairs as requested by unscheduled work orders and/or department managers and supervisors and completes Reads and interprets equipment manuals and work orders to perform required maintenance and service.</li>
<li>Comfortable with electrical &amp; PLC Controls</li>
<li>Perform other duties as required.</li>
</ul>
What you bring to the table
<ul>
<li>Must possess a Class 4 Alberta power engineer certification- must have mechanical and analytical skills, as well as the ability to troubleshoot and resolve issues as they arise.</li>
<li>Have 2 years’ experience managing and troubleshooting boilers.&nbsp;</li>
<li>Additional certification as Millwright is an asset.&nbsp;</li>
<li>Be able to work independently and as part of a team.</li>
<li>Must be proactive and help the department achieve its goals.</li>
<li>Must be organized and detail oriented.&nbsp;</li>
<li>Must be able to work a rotating shift as well as some extended hours and weekends.</li>
</ul>
This is your invitation to apply now!
[Maintenance]
#hlmg

Class 4 Power Engineer & Mechanic - Food Manufacturing

Basic Qualifications: PRIMARY FUNCTION: Design and specify advanced electrical, mechanical, and computer-controlled systems. Improve manufacturing support and maintenance programs through training and technical support. Develop process specification, machine parameters, and develop plan for scrap reduction and uptime improvements. Drive capital projects from strategic planning phase to purchase, installation, run off and hand off to operations. Benchmark best in class facilities and implement world class processes, equipment, and workflow. ESSENTIAL FUNCTIONS: • Design control systems for machine tools, including electrical, pneumatic, and hydraulic. • Selects capital equipment for manufacturing processes. • Improve current machine tools to increase uptime, improve quality and increase productivity. • Provides engineering support to production equipment and processes, including advising maintenance. • Establishes programs for cost savings activities to support overall plant requirements. • Advise in improving preventative maintenance programs. • Consults with suppliers and internal engineers for continuous improvement programs. • Authorizes/approves changes to machine tool programs. • Trains associates on new technologies and manufacturing processes. • Maintain and follow Quality Management System and Environmental Management System requirements. • Involvement in teams &amp; champion team activities. • Track and accumulate cost savings. • PFMEAs: understand the use of PFMEAs within our organization; develop, maintain and review PFMEAs as needed/required. • Other duties may be assigned. JOB REQUIREMENTS: • Bachelor's Degree from an accredited institution required • Position requires technical knowledge in machine function, processes, control system, CNC, PLC, servo drives, stepper motor drives and electrical/electronic systems. • Position requires technical knowledge in mechanical design. • Detailed abilities in capital equipment justification, project scheduling and managerial planning. Human relations are essential. • Mentor and develop maintenance personnel. • Assist other plants/facilities with technical problems. • Applicant must be capable of self-managing assigned project tasks. • Preferred experience in data driven analysis and problem-solving methods. #2l Benefits: • Medical Benefits • Life Insurance Benefits • 401K • Vision • Dental • Tuition Assitance • Paid Time Off • Referral Program • Employee Assistance Program • Professional Development Assistance • Flexible Spending Account • Disability Insurance

Lead Manufacturing Engineer

<h1>Maintenance Technician&nbsp;</h1>
<h2>Days (4am - 4pm, 223 Schedule)</h2>
<h2>Nights (4p - 4am, 223 Schedule)</h2>
<h4>plus $2.00/hour Shift Differential for Night Shift&nbsp;</h4>
*Starting Pay Based on Interview/Skills Assessment
Are you a&nbsp;Maintenance Technician who thrives in a continuous improvement-based environment and is committed to maintaining the efficiency of manufacturing machinery and equipment? Join our team and become a driver in ensuring the smooth operation of cutting-edge production and manufacturing equipment, with responsibilities including setup, installation, repair, and maintenance.
As a Maintenance Technician, you will:
<ul>
<li>Install and maintain production machines and the plant facility’s equipment.</li>
<li>Perform regular preventive maintenance on machines, equipment, and plant facilities.</li>
<li>Apply mechanic skills to troubleshoot and repair production machines.</li>
<li>Read and interpret equipment manuals and work orders for maintenance and service.</li>
<li>Diagnose problems, replace or repair parts, test and make adjustments.</li>
<li>Utilize hand and power tools, electric meters, and material handling equipment in performing duties.</li>
<li>Ensure compliance with safety regulations and maintain clean and orderly work areas.</li>
</ul>
If you are familiar with plant-specific electrical equipment, proficient with electrical tools, and high-speed manufacturing equipment, YOU are our ideal candidate. If you are ready to take on these challenges and make a significant impact, APPLY NOW and join us to be a part of our commitment to excellence and safety.
We offer a variety pack of benefits after just 30 days:
Medical, Dental, Vision, Life, Flexible Spending Account, Retirement Savings Plan with Match, Short Term Disability, Long Term Disability, Group Critical Accident Insurance, Group Critical Illness Insurance, Employee Assistance Plan and numerous opportunities to volunteer in the communities in which we operate. Paid Time Off (PTO) available after 90-days.
You will be considered for employment in our inclusive&nbsp;workplace.
Because at Shearer’s, we are committed to providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, protected veteran status, or any other characteristic protected by law.
[Maintenance]
#hlmg

Maintenance Technician

As a manufacturing associate, you will play a valuable role within the lab department where you will be testing and inspecting material to confirm the quality of our product before shipping to the client as this is the finishing stage of the process.
In this position, you will be preparing material for lab inspections as well as testing these materials using saws, lathes, and grinders by interpreting plans, specifications or drawings. A successful associate will be responsible for setting up and operating machines safely within the standard operating procedures, detecting faulty equipment, defective material, and preparing etching solutions to be used to inspect the product. In addition, you will need to demonstrate independence and motivation along with effective teamwork skills with an ability to work collaboratively with cross-functional teams.

Additional Responsibilities:
<ul>
<li>Perform minor machine maintenance</li>
<li>Mark dimensions and use correct measuring tools to cut samples</li>
<li>Operate fork trucks and cranes</li>
<li>Responsible for adherence to all safety policies, practices and procedures</li>
<li>Ability to use measuring devices like gauges, meters, and calipers</li>
<li>Knowledge of machining operations, and material characteristics.</li>
<li>Request cutbacks and re-sample on material samples having unacceptable structure.</li>
<li>Refer questionable structures to quality control metallurgist.</li>
<li>Maintain macro inspection and inventory reports in established forms and computer systems.</li>
<li>Responsible for receiving acid for bulk and tanks and the inspection of these tanks. Also, responsible for doing checks on acid strengths to ensure proper etching, and must measure and mix his own acids.</li>
<li>Evaluate grain size in the etched condition and evaluate the structure of nickel and steel alloy per lab instructions and specs.</li>
<li>Take photo micro graph of prepared micro and micro plate.</li>
<li>Assist and aid in routine laboratory operations and training new employees.</li>
<li>Lead and participate in standard work events, reports and meetings.</li>
<li>Learn and implement ATBS tools (VSM, Set-up and reduction etc.)</li>
</ul>
Requirements
Basic Qualifications:
<ul>
<li>High School diploma or GED</li>
</ul>
Preferred Qualifications (in addition to the Basic Qualifications)
<ul>
<li>At least one (1) year of manufacturing experience</li>
</ul>
Skills
<ul>
<li>Basic computer skills </li>
<li>Basic math skills </li>
<li>Analytic and problem-solving skills </li>
</ul>
We thrive when the expectations are great, and the barriers are high. We're solving the world's most difficult challenges through materials science. Our advanced, integrated process technologies and proven performers give us a tremendous competitive advantage. When customers systems need to fly higher, dig deeper, stand stronger, and last longer -- anywhere on, above or below the earth -- ATI is proven to perform.
 *It is ATI's policy to not provide immigration sponsorship for any of the company's positions. ATI and its subsidiary companies will provide equal employment opportunities to all applicants without regard to applicant's race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, veteran status, disability status, or any other status protected be federal or state law. The company will provide reasonable accommodations to allow an applicant to participate in the hiring process if so requested.
StatusFull-timeWork ArrangementOn-site

3,759 manufacturing Jobs