<h3>Job Description</h3>
Amentum is seeking an Industrial Maintenance Mechanic IV- HVAC to join our operations &amp; maintenance team. This Industrial Maintenance Mechanic IV is responsible for providing an advanced level of expertise in responding to work orders, troubleshooting, and providing preventive and corrective maintenance on the facility mechanical equipment and systems in an industrial manufacturing environment. Must possess the ability to make decisions and communicate well as a more senior technician. Must have the ability to diagnose and troubleshoot ventilation equipment, pumps, compactors, and fans in an industrial environment. Strong mechanical/electrical skills are required, including the ability to work safely around 3-phase power up to and including 480V. Must demonstrate good written and verbal communication. The Industrial Maintenance Mechanic IV must have the ability to identify and correct any safety-related issues and perform independent equipment evaluations to identify potential equipment failures. General Maintenance of equipment will also be required. Responsibilities: 
<ul>
<li>Performs planned maintenance on all building equipment and related services for specific area while being sensitive and responsive to customer needs.</li>
<li>Performs trouble-shooting techniques on mechanical equipment such as pumps, air handlers, hydraulic systems, research laboratory vacuum systems, RO/DI purified water systems, compressed air and other gas equipment and distribution systems to determine problems and effect repairs as promptly and efficiently as possible to minimize downtime.</li>
<li>Performs preventative maintenance inspections.</li>
<li>Develops and implements planned maintenance procedures.</li>
<li>Performs basic pipefitting repairs.</li>
<li>Assists in installing, inspecting new equipment, and servicing installations.</li>
<li>Provides support to co-workers, contractors, vendors, project managers, building managers, and engineers as necessary to support project and renovation work.</li>
<li>Complies with all governmental, company, and industrial regulations, codes, and standards, health safety practices, and permit systems.</li>
<li>Conducts preventive maintenance inspections and performs required preventive maintenance actions such as lubrication, cleaning, filter changes, etc.</li>
<li>Performs preventive maintenance as scheduled in the Computerized Maintenance Management System (CMMS).</li>
<li>Responds and provides service and feedback to the customer on all work orders while assuring compliance to codes, regulations, and industry standards.</li>
<li>Recommends measures to improve maintenance methods and equipment performance.</li>
<li>Analyzes and resolves work problems, or assists workers in solving work problems</li>
<li>Understands company policies and enforces safety regulations.</li>
<li>Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tagout procedures and wearing PPE as required.</li>
<li>Operates various measuring, diagnostic and testing instruments to help provide energy efficiency solutions.</li>
<li>Operates a variety of equipment such as hand tools, laptop computers and diagnostic hardware to perform work.</li>
<li>Maintains a strict schedule in order to be successful in the assignment yet demonstrates flexibility in the day-to-day activities and scheduling for the benefit of the customer.</li>
<li>Other duties as assigned by Manager or Supervisor.</li>
</ul>
\n Minimum Requirements: 
<ul>
<li>Universal - EPA 608 Technician Certification.</li>
<li>Five years of experience performing mechanical maintenance in an industrial environment or demonstrated equivalent combination of education and experience.</li>
</ul>
\n Additional Information: 
<ul>
<li>Qualified applicants who are offered a position must pass a pre-employment substance abuse test.</li>
<li>This position may require a valid Driver's License.</li>
<li>This position does not include sponsorship for United States work authorization.</li>
<li>This position will require the ability to obtain a security access badge at our client's location.</li>
<li>This position may require various shifts, weekends, and alternative work schedules.</li>
</ul>
\n Physical Requirements: 
<ul>
<li>Some tasks will require repetitive wrist movement.</li>
<li>Some tasks will require the ability to walk extensively throughout facilities during a workday.</li>
</ul>
\n
<ul>
<li>Requires the ability to climb extension ladders, roof ladder, stepladders, and stairs as needed during a workday.</li>
<li>Requires the flexibility to bend/stoop, squat, kneel, reach/stretch, and move in a 90-degree fashion during workday.</li>
<li>Requires the ability to differentiate colors pertaining to wire color-coding.</li>
<li>Requires ability to read and understand information contained in a variety of documents or displayed on a computer screen.</li>
<li>Requires ability to use a variety of office equipment and to operate a computer keyboard to access data bases, to send/receive messages and to prepare documents.</li>
<li>Requires ability to attend meetings throughout the site and potentially travel to other Amentum, customer and/or vendor locations in the area, as well as some air travel to more distant locations.</li>
<li>Requires the ability to communicate with others on the telephone and in one-on-one or group discussions, meetings and presentations.</li>
<li>Demonstrated fluency in computer use including the full Microsoft product line.</li>
<li>Requires some moving of light to medium weight materials into desks, filing cabinets and other storage locations.</li>
<li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li>
</ul>
\n Special Requirements: 
<ul>
<li>Wear steel toe safety shoes, safety glasses, gloves, hard hats, and other Personal Protective Equipment as needed.</li>
<li>Cope with demands (stressors) that are associated with the job and/or the work environment so that acceptable levels of performance and overall contribution are maintained.</li>
</ul>
\n Other Attributes: 
<ul>
<li>Must be willing to work overtime when required.</li>
<li>May be required to work holidays and weekends.</li>
</ul>
\n Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Maintenance Mechanic - Manufacturing

<h3>Job Description</h3>
Global Power Components is a privately held, growing manufacturer of UL heavy gauge steel fuel tanks, trailers, large generator enclosures and modular metal enclosures for housing fully-equipped electrical distribution and control equipment.
 
We are looking for a Project Manager to join our growing organization.
 
Global Power Components is interested in every qualified candidate who is eligible to work in the United States. However, at this time we are unable to sponsor Visas.
 
The manufacturing of our products is tied to a constantly changing work schedule. The schedule can change several times a day due to forces that are outside of our control.
 
A core responsibility of the Project Manager will be to work with the department supervisors to maintain a smooth work flow. The position requires you to be on site. If problems arise, a solution must be worked out immediately. If production in one department is held up, resources must be shuffled to a different department to help pull the schedule back in line. Issues and product changes will happen on a daily basis. Solutions must be quickly enacted in a calm and confident fashion.
 
The position requires constant follow-up and great people skills. This person should have manufacturing and or experience, be able to meet critical deadlines, be very thorough and micro-managing will be a major responsibility. Recent College grads encouraged to apply.
 
Core responsibilities
Manage several customer projects to the daily/weekly/monthly schedule
Allocate resources according to change in work flow
Manage project flow to avoid bottlenecks
Enter customer change orders to ensure all aspects of project have been accurately invoiced and communicated to the customer
Full knowledge and understanding of financial impact of project to ensure all aspects of project have been accurately and timely invoiced and communicated to the customer
Monitor long lead time items that may affect delivery
Follow-up with incoming product and inventory for future projects
Physically inspect custom items to be used on products
Prepare weeks in advance by reviewing engineering drawings before project goes live
 
Skills/qualifications required
Proficiency with MS Word, Excel and Outlook
Previous similar experience managing projects
Ability to be flexible when required
Ability to meet timelines and be able to flex projects to meet demands of customers
Not afraid to micro-manage projects
 
 
Equal Opportunity Employer/Minorities/Women/Veterans/Disabled
Global Power Components is an Equal Opportunity and Affirmative Action Employer. Global Power Components is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

Project Manager

<h3>Job Description</h3>
Job DescriptionDescription:
About Us:
For over twenty years, Cinterra has provided specialized electrical utility and solar construction services to support some of the nation's leading contractors, private industry, and public utilities. Our commitment to quality and customer satisfaction is only rivaled by one of the highest safety ratings in the industry. The services we provide help to bring electric power and renewable energy sources to millions. Come join our team today! 
Position Summary:
The UG Operator is responsible for all duties associated with and related to the safe, efficient, and cost- effective operation of all UG Power Equipment including but not limited to Line Truck, Squirt Boom, Bucket Truck, Excavator and or backhoe experience preferred. 
Essential Duties &amp; Responsibilities:
<ul>
<li>Must be proficient in operating excavator and or backhoe. </li>
<li>Must be proficient in setting up and operating line truck, bucket truck, or back yard machines. </li>
<li>Working knowledge of line work preferred. </li>
<li>Perform general site preparation, restoration and right of way maintenance duties. </li>
<li>Develop proficiency in safe operation of all equipment. </li>
<li>Perform preventative maintenance and inspections on equipment. </li>
<li>Run power tools. </li>
<li>Perform hand digging. </li>
<li>Transport equipment to and from job sites. </li>
<li>Load and Unload Equipment. </li>
<li>Maintain material inventory on truck. </li>
<li>Active leadership skills as lead position while crew foreman is offsite. </li>
<li>Working knowledge of underground utilities. </li>
<li>Working knowledge of 811 Requirements and Procedures. </li>
</ul>
Requirements:
Job Requirements &amp; Qualifications:
<ul>
<li>High school diploma (preferred). </li>
<li>Knowledge of Utilities installation techniques and standards (preferred). </li>
<li>Must have a valid Class A CDL License (required). </li>
<li>Able to lift heavy objects, walk, and stand for long periods of time. </li>
<li>Able to perform strenuous physical labor under adverse field conditions. </li>
<li>Able to lift, push, pull, carry objects, and use abdominal and lower back muscles to provide support over time without fatigue. </li>
<li>Able to quickly move arms and legs and have excellent stamina. </li>
</ul>
Physical Requirements:
<ul>
<li>Ability to lift and carry heavy materials, tools, and equipment (up to 50 pounds or more). </li>
<li>Must be able to traverse irregular and steep terrain. </li>
<li>Endurance to perform physical tasks throughout the workday, including bending, stooping, kneeling, and standing for extended periods. </li>
<li>Agility and flexibility to navigate construction sites and access work areas, including climbing ladders and scaffolding. </li>
<li>Must be able to position one-self to work in confined spaces such as trenches, pits, manholes, and tunnels. </li>
<li>Must be able to wear personal protective gear most of the day. </li>
<li>Must be able to work in a variety of weather conditions. </li>
<li>Must have manual dexterity, a good sense of balance, and excellent hand-eye coordination. </li>
</ul>
Cinterra provides equal employment opportunities without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual

Underground EO

<h3>Job Description</h3>
Overview: 
Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets.
&nbsp;If you are a current associate of Primo Brands, please apply via myADP.
$28 Hourly
Kentwood, LA 
Monday to Friday 4:00 PM - 12:00 AM&nbsp;
Needed flexibility to work overtime and weekends based on business needs
Shift differential: 6%-8% of base hourly rate paid for applicable hours worked
 Responsibilities:
The Technical Lead A/Production Line Mechanic role is an advanced level machine technician that would be responsible for fully understanding an assigned machine center, while being fully capable of performing minor repairs, PMs and troubleshooting and the machine. This role will build necessary capabilities to take on a mechanic level role at full development.
Responsibilities:
 • Support operators through troubleshooting, diagnosing and repairing equipment • Learn and understand all SOPs for mechanic level and operator level positions • Be familiar to operate all equipment to include normal running parameters, set points, etc • Execute work orders including special projects, rebuilds and installations when requested • Work with a sense of urgency to repair and startup the line as quickly as possible • Develop a working knowledge of basic maintenance principles • Intermediate electrical troubleshooting • Execute PMs during planned stoppages to include focus on project work installation, tag closure, standard procedure creation, and work order execution • Work with vendors as needed for start up, improvement and modification of equipment • Train operators on equipment standards and technical training modules as needed • Understand losses of equipment and develop plans to reduce downtime based on highest loss machine per line • Vacation support for senior production technicians (crew leads)
 Qualifications:
<ul>
<li>Prefer a background of 2 years of successful current experience in the direct line supervision of maintenance employees and/or demonstrated leadership skills</li>
<li>1-2 years' experience with SAP maintenance systems including storeroom inventory</li>
<li>Background with preventive maintenance systems in manufacturing</li>
<li>Must have excellent all-around maintenance system skills and experience in areas such as industrial electricity, mechanical power transmission and fluid piping systems</li>
<li>Must have good computer skills including computerized maintenance management systems, working knowledge of MS Office Application and PLCs (Plant Automation Systems)</li>
<li>Must have good troubleshooting and decision-making skills</li>
<li>Must have experience in a high-speed manufacturing environment</li>
<li>Must be comfortable working in a team-oriented environment</li>
<li>Must be able to successfully handle multiple priorities</li>
<li>Must be highly motivated; actively demonstrate a sense of urgency toward the completion of activities, tasks and goals</li>
<li>Strong oral and written communication skills along with excellent follow-up capabilities</li>
<li>Experience with plant support equipment a plus (air compressor, pumps, chillers, boilers)</li>
<li>Able to achieve a passing score on a skills assessment (Ramsay)</li>
</ul>

Production Mechanic

<h3>Job Description</h3>
Midland Manufacturing, part of OPW, a Dover Company is a leader in the rail tank car valves and fittings industry. Our innovative rail products are manufactured and engineered for the safe and efficient loading, transporting, and unloading of hazardous and non-hazardous bulk products.
\n
Overview:
\n
The CNC Maintenance Mechanic II performs repair, modification and preventive maintenance tasks on CNC machinery, building equipment fixtures and systems. This role will also troubleshoot, repair and maintain facility plumbing, mechanical and electrical systems.
\n
Primary Responsibilities/Essential Responsibilities:
\n
Troubleshoots, repairs and maintains CNC machinery as well as standard facility systems.
\n
Performs routine preventative maintenance operations such as maintaining an accurate TPM record, lubrication, cleaning, filter changes, etc. in accordance in manufacturers operation and maintenance schedule and guidelines.
\n
Performs routine and assists with complex trouble shooting and repair of mechanical equipment and systems. (Requires the isolation of the malfunction, disassembly of equipment and repair/replacement of bearings, gears, structural components, etc.)
\n
Locates sources of problems by observing mechanical devices in operation; soliciting information from line operators and other production associates and listening for problems.
\n
Uses precision measuring and testing instruments, gauges, power tools and other hand tools to complete essential functions.
\n
Provides emergency/unscheduled repairs of production equipment to return to safe operation.
\n
Assists in the movement of equipment and furniture as needed.
\n
Performs basic troubleshooting and root cause analysis of equipment failures.
\n
Reviews service requests for repairs and maintenance determines nature of problem and recommends appropriate solution.
\n
Performs required preventive maintenance actions such as lubrication, cleaning, filter changes, etc.
\n
Qualifications/Requirements:
\n
High school diploma or GED.
\n
5+ years of maintenance troubleshooting experience.
\n
CNC machining center experience preferred, including Mazak, Nakamura, Samsung, Okuma and/or DMG Mori.
\n
Experience working with PLC’s and working with AC/DC Motors/Drives
\n
Experience with electronic wiring/circuits and schematics
\n
Experience with industrial electrical needs related to machinery
\n
Desired Characteristics, Competence and Capabilities:
\n
Proficient reading engineer drawings, blueprints and technical manuals.
\n
Must possess good manual dexterity and hand-eye coordination.
\n
Excellent time management and organizational skills; must be able to multi-task and prioritize duties.
\n
Ability to work in a fast-paced environment with minimal supervision.
\n
Ability to work collaboratively and maintain effective working relationships with co-workers.
\n
Ability to effectively problem-solve.
\n
Excellent communication, interpersonal and customer service skills.
\n
Physical Demands and Environmental Conditions:
\n
While performing the duties of this job, the team member is continuously standing, repetitively grasping and repetitively using fine manipulation with the hands. The team member may be frequently required to walk, bend, squat, or twist as well as repetitively push or pull. Individual must be able to work at heights. Will be required to frequently lift up to 35 pounds and occasionally lift up to 100 pounds.
\n
This position is performed in a shop environment. Team members in this position will be exposed to loud operating machinery, cold temperatures, chemicals and vapors. The team member will frequently be required to work outside and at heights. The team member may occasionally be required to work in an office environment.
\n
Hand and power tools, ladders, lifts, computer.
\n
Benefits: Our total rewards package for eligible team members also includes: a 401(k) savings plan with employer contributions; medical, dental and vision insurance; wellness programs; health savings account, health care and dependent care flexible spending accounts; company paid short-term disability and long-term disability; company paid employee basic life and AD&amp;D insurance; supplemental employee and dependent life insurance; optional accident, hospital indemnity and critical illness insurance; adoption, surrogacy, and fertility benefits and assistance; commuter benefits; parental, military, jury duty, and bereavement leaves of absence; paid time off, including 10 paid holidays per calendar year; paid vacation days beginning at 120 hours annually; 40 paid sick leave hours annually or as provided under state and local paid sick leave laws; tuition assistance is available; business travel services; employee discounts; and an employee assistance program that includes company paid counseling sessions and legal services. Eligibility for benefits is governed by applicable plan documents and policies.
\n
All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.
\n
We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.
\n
For over 125 years, OPW has led the way in designing and manufacturing world-class retail fueling, fluid handling and car wash system solutions for the safe and efficient handling and distribution of fuels and critical fluids. OPW makes above ground and below ground products for both conventional, vapour recovery and clean energy applications in the retail and commercial markets. Additionally, OPW supplies loading arms, valves and dry-break couplings, tank truck equipment, rail car valves and equipment, and car wash systems. OPW has manufacturing operations in North America, Europe, Latin America and Asia Pacific, with sales offices around the world. OPW is part of the Dover Corporation, which is publicly traded on the New York Stock Exchange under 'DOV'. To learn more about OPW’s 125 years of providing industry-leading solutions, visit our website at <a href="http://www.opwglobal.com" target="_blank">www.opwglobal.com</a>.
\n
Dover is a diversified global manufacturer with annual revenue of over $8 billion. We deliver innovative equipment and components, specialty systems, consumable supplies, software and digital solutions, and support services through five operating segments: Engineered Products, Clean Energy &amp; Fueling, Imaging &amp; Identification, Pumps &amp; Process Solutions and Climate &amp; Sustainability Technologies. Dover combines global scale with operational agility to lead the markets we serve. Recognized for our entrepreneurial approach for over 60 years, our team of approximately 24,000 employees takes an ownership mindset, collaborating with customers to redefine what's possible. Headquartered in Downers Grove, Illinois, Dover trades on the New York Stock Exchange under "DOV." Additional information is available at dovercorporation.com

CNC Maintenance Mechanic

<h3>Job Description</h3>
Company Summary
Stellar Energy provides state-of-the-art solutions customers build in for optimized energy performance now; and in the preparation for the energy needs of tomorrow. In business for 25 years, we’ve delivered added energy efficiency and capacity to customers in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Hyperscale deployment at the best possible speed to first megawatt. All delivered with the lower emissions required to support our partners’ unique sustainability objectives.
 
 
Stellar Energy specializes in a wide range of engineering and manufacturing solutions within the energy sector including turbine inlet air chilling, central utility plants, district cooling, combined heat &amp; power systems, thermal energy storage, inlet air heating, data center chilling, and inlet air chilling for LNG facilities. Additionally, our expertise extends to start-up &amp; commissioning, system health analysis, services, and training. Our in-house team of skilled engineers and dedicated tradespeople are the reason we are the global leader in customized solutions. Stellar Energy strives to add value to today’s energy infrastructure, achieving secure, affordable, and sustainable energy that will help to create a responsible energy economy.
 
Position Summary
As a member of the technical staff, the Electrical Engineer is responsible for the electrical design of modular TIAC (Turbine Inlet Air Cooling) Plant, CHP, Mission Critical and District Cooling Plant up to full production. This includes specification reviews; electrical calculation and equipment selection to meet process, code, and client requirements; conduct design reviews; performs testing and inspections; coordinates with other disciplines, clients, and fabrication for production. The Electrical Engineer will also be responsible for technical support for all products currently in production.
 
Essential Functions:
<ul>
<li>Serve as the technical lead for electrical items associated with bottoming cycle of combined cycle power projects from project start to completion.</li>
<li>Be the Subject Matter Expert (SME) for the assigned equipment</li>
<li>Collaborate with multi-functional teams, including engineers, project managers to define project goals, scope, and deliverables to ensure the equipment is delivered on-time, and to the desired quality.</li>
<li>Collaborate with Customers, Engineering and Construction contractors, vendors, providing timely resolutions of engineering issues relating to the assigned products.</li>
<li>Responsible for creating and updating Technical Specifications for electrical equipment including generator with its auxiliaries.</li>
<li>Work with Supply Chain in obtaining proposals and evaluating them; work in conjunction with Supply Chain and Project Management in selecting the equipment manufacturer</li>
<li>Manage Original Equipment Manufacturer (OEM) continuously from Project start to completion ensuring timely submission of documents and equipment delivery</li>
<li>Collaborate with external engineering companies in designing system around the main equipment, document review, etc.</li>
<li>Create and manage Master Document List for the equipment relating to the assigned products.</li>
<li>Manage technical specifications, procedures, and design data, as applicable to the assigned project(s).</li>
<li>Support Site and Construction Management Company during Construction and Commissioning phase by timely responding to RFIs and other information requests.</li>
<li>Support Customer Training</li>
<li>Work with OEM in developing shop test procedures and support testing at factory and site in demonstrating guaranteed parameters</li>
<li>Work with Steam Turbine lead in properly designing and specifying the generator and associated systems coupled to the steam turbine.</li>
<li>Assists with warranty requests by assessing and executing a corrective action plan</li>
<li>Participates in ISO 9001 and other audits.</li>
<li>Any other engineering tasks associated with the assigned equipment and project</li>
<li>Develops new procedures and work instructions, as required, for the team to ensure accurate work products and improve productivity.</li>
<li>Any other engineering tasks associated with the project</li>
<li>Anticipate and troubleshoot any potential issues in assigned area.</li>
<li>Submit periodic internal reports to Management regarding the status of engineering issues and look ahead for upcoming period.</li>
</ul>
 
 
Required Education and Experience
<ul>
<li>Bachelor of Science degree in Electrical Engineering or relevant disciplines from an accredited University.</li>
<li>4+ years of electrical design related experience, 2+ years of experience of large-scale industrial plant projects; preferably with experience in Power or EPC companies.</li>
<li>Familiar with all design drawings such as single line diagram for MV, LV systems, schematics, cable schedules, etc.</li>
<li>Familiar with Medium/low voltage system, load calculation; equipment layout, cable routing, lighting system, lightning protection, etc.</li>
<li>Familiar with selection and technical requirements of general electrical equipment including motor control center, transformer, variable frequency drives, conduits, etc.</li>
<li>Familiar with local and international codes and standards, regulations, and implementations.</li>
<li>Familiar with design procedures and cooperation with other disciplines.</li>
<li>Familiar with engineering deliverables and depth requirements at different stages of projects.</li>
<li>Familiar with market and vendors for each type of electrical equipment.</li>
</ul>
 
Preferred Education and Experience
<ul>
<li>Master’s degree in electrical engineering from an accredited University.</li>
<li>Professional Engineer Registration.</li>
<li>Knowledge of CAD software (AutoCAD preferred).</li>
<li>Knowledge of SKM software.</li>
</ul>

Electrical Engineer

<h3>Job Description</h3>
The Senior I&amp;E Reliability Engineer is responsible for supporting the operation, maintenance, and reliability of electrical equipment and infrastructure at the Celanese Pensacola Plant. Additional responsibilities include managing the development, updating, and implementation of equipment strategies, identifying and justifying equipment upgrade opportunities, supporting facilities improvement projects, and stewarding the site safe electrical work practices. Electrical equipment at the site includes AC and DC motors and motor controls, VFD’s, DC drives, medium and low voltage power circuit breakers and switchgear, and power distribution systems at the 480V and 15kV levels.
 
Responsibilities:
 
Primary Functions
<ul>
<li>Work in a team environment with other engineering disciplines, operations, and mechanical personnel</li>
<li>Ensure safe, cost effective, operable electrical equipment and associated systems are provided and maintained to meet current business unit needs</li>
<li>Specify new electrical equipment to comply with industry and company design practices</li>
<li>Provide assistance in the field during plant start-ups, shutdowns or upsets as needed</li>
<li>Provide troubleshooting assistance for plant electrical installations</li>
<li>Provide quality control during maintenance outages for electrical equipment</li>
<li>Manage the development, updating, and implementation of equipment strategies for electrical equipment</li>
<li>Lead electrical infrastructure plan development and improvements</li>
<li>Drive electrical infrastructure improvement projects and steward recommendations to site management team</li>
<li>Provide technical support for front-end development, cost estimation, design, construction, and startup for projects, change packages, and turnarounds</li>
<li>Develop/review electrical contractor work scopes while incorporating site best practices and standards</li>
<li>Ensure all projects and repairs meet local codes and regulations i.e. IEEE, NFPA 70E, NEC etc.</li>
<li>Willing to be available outside of normal working hours to occasionally serve as technical consultant</li>
<li>Translate technical problems into business risk while communicating a case for action for mitigations or proposed solutions</li>
<li>Assists in the development of maintenance / operating procedures and technician training</li>
<li>Provide Root Cause Failure Analysis expertise and support as needed for equipment failures</li>
</ul>
 
Required Qualifications
<ul>
<li>Bachelor of Science degree in Electrical Engineering from an accredited university</li>
<li>At least 7 years of electrical engineering experience in a manufacturing environment</li>
<li>Experience with IEEE, National Electrical Code (NEC), OSHA standards</li>
<li>Experience with industrial plant electrical power distribution systems at 480V and 15kV levels</li>
<li>Experience with medium voltage and low voltage power circuit breakers and switchgear</li>
<li>Root Cause Failure Analysis training / experience</li>
<li>Experience with Management of Change (MOC) in a manufacturing environment</li>
</ul>
Preferred Knowledge / Skills / Experience
<ul>
<li>High level of knowledge on NFPA 70E Electrical Safe Working Practices</li>
<li>Strong knowledge of AC/DC motors and motor controls</li>
<li>Ability to design, program and troubleshoot AC Variable Frequency Drives (VFD)</li>
<li>Knowledgeable on electrical power system studies, with demonstrated ability to interpret load flow, short circuit and arc flash studies and follow-through on study recommendations</li>
<li>Thorough understanding of electrical single line diagrams and ability to update as needed</li>
<li>Strong analytical &amp; troubleshooting skills.</li>
<li>Excellent verbal and written communications skills with the ability to communicate effectively to all levels of an organization and maintain productive vendor relationships</li>
<li>Knowledge of basic economics and justification calculations</li>
</ul>
 
Celanese is a global leader in chemistry, producing specialty material solutions used across most major industries and consumer applications. Our businesses use our chemistry, technology and commercial expertise to create value for our customers, employees and shareholders. We support sustainability by responsibly managing the materials we create and growing our portfolio of sustainable products to meet customer and societal demand. We strive to make a positive impact in our communities and to foster inclusivity across our teams. Celanese Corporation employs more than 11,000 employees worldwide with 2024 net sales of $10.3 billion. For more information about Celanese Corporation and its product offerings, visit <a href="http://www.celanese.com" target="_blank">www.celanese.com</a>.

Senior I&E Reliability Engineer (Low & Medium Voltage)

<h3>Job Description</h3>
Air Liquide Electronics innovative electronic materials respond to increasingly challenging customer demands for improved mobility, connectivity, computing power and energy consumption. We offer ultra pure carrier gases, a wide range of specialty gases and advanced precursor molecules, enabling equipment for safe distribution, purification and on-line purity control. On site, manufacturers rely on our expertise in providing full management of these gases, advanced molecules and equipment and in helping to continuously improve production processes.
_______________________________________
 
How will you CONTRIBUTE and GROW?
 
Carrier Gas Operations provides on-site air separation units producing nitrogen and oxygen gas production with best-in-class safety, reliability, flexibility and total cost of operation to our semiconductor manufacturing customers. Also supplying cost effective high purity bulk gas.
 
The SM1 Gas Plant I&amp;E technician is responsible for the upkeep of instrumentation at the plant facility including valves, transmitters, PLCs, analyzers, etc including troubleshooting, repair, testing, project management, and preventative maintenance.
<ul>
<li>Work to achieve zero personal first aids/injuries. </li>
<li>Comply with all Air Liquide Policies &amp; Procedures.</li>
<li>Comply with Safe Work Permit Process including preparing Pre-Job Plans, executing LOTOs, hot work safety, and confined space safety.</li>
<li>Managing preventative maintenance for site instrumentation such as calibrations including maintaining records in the CMMS program.</li>
<li>Troubleshoot and repair instrumentation equipment including taking corrective and preventative actions to improve plant or machine performance.</li>
<li>Read and interpret instruments’ schematics.</li>
<li>Repair and maintain various analytical instrumentation and support equipment such as PDHID, RGD and FID detectors, and various real time gas analyzers.</li>
<li>Manage instrumentation projects from project scoping to implementation including preparing scope of work, bidding out projects to contractors, scheduling, and overseeing contractor quality of work. </li>
<li>Establish and maintain an analytical &amp; instrumentation inventory tracking program</li>
<li>Exhibit instrumentation and mechanical aptitude</li>
<li>Read and interpret blueprints, flow charts, process piping ISOs, simple schematics, P&amp;IDs, electrical schematics, controls documentation; perform basic math operations.</li>
<li>Write and redline standard operating procedures </li>
<li>Keep accurate records and be diligent in documentation and record retention policies.</li>
<li>Demonstrate proficient knowledge of control board and operator interface computer consoles.</li>
<li>Participate in plant outages</li>
<li>Maintain and expect high housekeeping and organizational standards.</li>
<li>Assist other maintenance crafts as needed.</li>
<li>Perform other duties as assigned by Plant Management</li>
</ul>
______________________________________
 
Are you a MATCH? 
 
Requirements:
<ul>
<li>High School Diploma or GED required; Technical Associates degree preferred</li>
<li>6+ years of technical training and/or operations experience, combined. </li>
<li>Familiar with terminology and technical knowledge of equipment such as transmitters, PLCs, analyzers, and valves. Gas Chromatography a plus</li>
<li>Familiar with safe work practices, safety procedures and other safety requirements.</li>
<li>Ability to draw and read electrical and PLC diagrams.</li>
<li>Ability to work callouts, nights, weekends, &amp; possible holidays</li>
<li>Able to safely work on electrical equipment up to 480V.</li>
<li>Valid Driver’s License</li>
<li>Familiarity with regulatory requirements for operating plants (Process Safety Management, EPA regulations, FDA regulations, state/local regulations).</li>
</ul>
 
Physical Requirements:
<ul>
<li>Must be able to wear required PPE safety equipment including, hardhat, safety glasses, safety shoes/boots, and FRC clothing</li>
<li>Full range of motion; ability to lift 50 lbs.</li>
<li>Able to climb ladders, work off elevated platforms/surfaces</li>
<li>Able to work in non-conditioned environment for extended periods</li>
<li>Able to enter confined spaces for inspection, testing and work</li>
</ul>
______________________________________
The hourly range for this position in Texas is $35.00-$40.00
 
Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. 
For more information you can go to Air Liquide Benefit Offerings
 
The candidate must have valid unrestricted employment authorization in the U.S. and must not require visa sponsorship now or in the future. 
 
Our Differences make our Performance
 
At Air Liquide, we are committed to build a diverse and inclusive workplace that embraces the diversity of our employees, our customers, patients, community stakeholders and cultures across the world.
 
We welcome and consider applications from all qualified applicants, regardless of their background. We strongly believe a diverse organization opens up opportunities for people to express their talent, both individually and collectively and it helps foster our ability to innovate by living our fundamentals, acting for our success and creating an engaging environment in a changing world.

I&E Technician

<h3>Job Description</h3>
Shaping the future through innovation and discovery! With a history spanning more than seven decades, Communications &amp; Power Industries' thousands of products have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, aid in the treatment of cancer, assist in diagnosing medical conditions, support and protect soldiers, sailors, and pilots, empower scientific discoveries and space exploration, help ensure the safety of imported foods and materials, and much more. CPI is headquartered in Plano, Texas and is a global manufacturer of electronic components and subsystems. We have manufacturing locations in the United States, Canada, Europe, and Asia. With a heritage of technological excellence, our team serves customers in the communications, defense, medical, industrial, and scientific markets. Responsibilities: 
<ul>\n
<li>This is an on-site position at our Hudson and/or Stow Massachusetts facilities</li>
\n
<li>Assist the Facilities Department Manager in ensuring all building facilities and grounds are properly maintained and serviced. Documentation control of all outside contracts, including but not limited to HVAC, Fire Protection, Building Inspections etc. </li>
\n
<li>Properly maintain machinery for production including Oven's, Autoclaves, Paint and Grinding Booths, etc. for Composite Structures. This includes heavy loading with the use of cranes and gantries for molds and product.</li>
\n
<li>Uses of wide variety of tools, maintains records of work performed, parts used, and time spent.</li>
\n
<li>Be able to take from design concept and bring to working, safe operation of equipment for personnel.</li>
\n
<li>Works with limited supervision, and take direct orders from skilled engineering, maintenance and production staff.</li>
\n</ul>
\nEssential Job Function: 
<ul>\n
<li>Good mechanical aptitude and good understanding of electrical and mechanical systems and troubleshooting techniques. \n</li>
\n
<li>Thorough understanding and ability to read schematics and blueprints/plans. \n</li>
\n
<li>Ability to read, write and understand English. \n</li>
\n
<li>Troubleshoot and repair a wide variety of mechanical, electrical, hydraulic, and pneumatic equipment and tools. Using prints and/or schematics and following accepted troubleshooting protocol, identify and repair malfunctions. \n</li>
\n
<li>Perform walk-through inspections of facility to locate damage that require repairs. Check buildings and grounds for damage, for required service and fire or safety hazards.</li>
\n
<li>Perform solder and soft line repairs for plumbing, clearing drain blockages, repairing flush valves, installation of new vacuum and compressed air lines.</li>
\n
<li>Perform electrical repairs such as changing ballasts, replacing receptacles/switches, machine control wiring, including motor starters and high voltage panels.</li>
\n
<li>Perform carpentry/paint repairs to walls, floors, ceilings, doors, windows, etc. Change light bulbs, diffusers, lenses, etc. Change or clean building and production equipment air handling unit filters. Monitor and log equipment performance.</li>
\n
<li>Perform preventive maintenance tasks including cleaning, lubricating, inspecting and adjusting all manufacturing and support equipment.</li>
\n
<li>Make recommendations to the Facilities Manager concerning improvements to the preventive maintenance system.</li>
\n
<li>Must be able to multitask, and perform several tasks at once, including safe operations for production employees and staff.</li>
\n
<li>Design and integrate production-related equipment using approved processes from Engineering staff and Facility Manager, including design build capabilities.</li>
\n
<li>Installation and setup of new and used equipment from other facilities.</li>
\n
<li>Must be fluent in Excel, filing, Word, and computer operations. </li>
\n
<li>Perform other duties as assigned.</li>
\n
<li>$25.00 - $35.00 per hour.</li>
\n</ul>
\nEducation 
<ul>\n
<li>High School Diploma or equivalent is required plus a minimum of 4 years of related experience.</li>
\n
<li>An AA Degree or certification in assigned area is preferred. </li>
\n</ul>
\nRequirements 
<ul>\n
<li>Requires sitting, standing, bending, stooping, reaching and climbing ladders. May require lifting up to 75 pounds. Requires manual dexterity including heights and be sufficient to operate standard construction equipment including but not limited to, fork truck, lift platforms, all maintenance tools and machines.</li>
\n
<li>Required normal range of hearing and vision. </li>
\n
<li>Must be able to pass Ma. D.O.T. Physical, including drug testing.</li>
\n</ul>
#LI-MH1

6,317 Electrical-power line Jobs