<h3>Job Description</h3>
Job Description
RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 56 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $6.2 billion.
The position is responsible for performing a diversified number of functions under direction of the Lead Precision Bearing Inspector or the Department Head. This individual can work on their own initiative provided they have the proper skill and where necessary the proper authorization/certification. This individual may be required to possess current certification at Level II for Magnaflux and/or be approved for Flight Safety Critical inspections.
Job Responsibilities:
<ul>
<li>Work with Engineering, Manufacturing &amp; Tool Room in developing gaging improvements.</li>
<li>Work with Engineering on the development of new products, focusing on the development of inspection methods.</li>
<li>Monitor the Quality &amp; Output of assigned inspectors.</li>
<li>Conduct First Article Inspections</li>
<li>May be required to be Flight Safety Critical certified.</li>
<li>Instruct associates in the proper use of inspection tools</li>
<li>Provide Technical assistance to inspectors, manufacturing personnel, Mfg. Floor Supervision.</li>
<li>Perform Government Source inspection</li>
<li>Monitor Production for excessive scrap, quality of parts and operation of processes.</li>
<li>Gather data for Process Capability Studies</li>
<li>Troubleshoot Quality Problems.</li>
<li>Initiate and/or revise inspection procedures and work instructions.</li>
<li>Initiate requisitions for new or replacement gaging as required to support production.</li>
<li>Set up and operate inspection &amp; test gaging for Precision Bearings, (ABEC 5 &amp; higher).</li>
<li>Set up and operate inspection &amp; test gaging for Bearings, (ABEC 4&amp; lower).</li>
<li>Interpret part print dimensions and specifications, (including GD&amp;T), to ensure parts meet print requirements.</li>
<li>Work with other associates as needed to support teamwork throughout the facility.</li>
<li>Maintain good housekeeping in assigned work area.</li>
</ul>
The above items are principle responsibilities and do not identify all duties inherent in the job.

Precision Inspector

<h3>Job Description</h3>
Job DescriptionCNC Machinist
Position Overview: The CNC Machinist is responsible for the operation of CNC machinery and producing parts from CAD/CAM designs, in accordance with customer requirements and standards.
Shift: 5pm-5am, Mon-Thurs
Key Responsibilities:
<ul>
<li>Operate CNC machinery, such as lathes, mills, and grinders, to produce parts and components.</li>
<li>Follow CAD/CAM designs and specifications to create parts and components.</li>
<li>Check accuracy of products using precision measurement tools.</li>
<li>Perform maintenance and regular inspections of CNC machinery.</li>
<li>Troubleshoot machinery malfunctions and make any necessary repairs.</li>
<li>Monitor and adjust machinery as needed to ensure quality products.</li>
<li>Ensure all safety procedures are followed.</li>
</ul>
Qualifications:
<ul>
<li>High school diploma or equivalent</li>
<li>Experience with CNC machinery, including lathe, milling, cam, and machine operations.</li>
<li>Knowledge of safety protocols.</li>
<li>Strong attention to detail.</li>
<li>Excellent problem solving and critical thinking abilities.</li>
<li>Ability to work independently and as part of a team.</li>
</ul>
 - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 02/19/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. &nbsp;CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at <a href="mailto:Benefits@CyberCoders.com" target="_blank">Benefits@CyberCoders.com</a> to make arrangements.

CNC Machinist

<h3>Job Description</h3>
Job Description
As a Night Shift Shop Foreman, you'll play a crucial role in optimizing our shop operations by maintaining workflow and efficiently distributing work among technicians. Working closely with the Operations Manager, this position oversees the quality of work on customer-owned inventory, ensures shop efficiency, and upholds our high standards for safety and organization.
Your Responsibilities:
<ul>
<li>Oversee daily operations: Collaborate with the Operations Manager to set goals and distribute work orders to technicians.</li>
<li>Ensure quality: Audit completed work and verify adherence to company standards.</li>
<li>Manage technician workloads: Optimize workflow and provide support to ensure the team is efficient and effective.</li>
<li>Provide guidance: Offer guidance on processes, policies, and expectations to team members.</li>
<li>Conduct safety meetings: Lead weekly safety meetings and ensure compliance with safety regulations.</li>
<li>Manage inventory: Maintain accurate inventory records and transactions in our CRM and ERP systems.</li>
<li>Support customer and sales teams: Address customer-related issues and provide assistance with work orders, part numbers, and deliveries.</li>
<li>Foster a positive work environment: Promote teamwork, collaboration, and a commitment to safety and quality.</li>
</ul>
 Qualifications:
<ul>
<li>2+ years of supervisory experience in a warehouse or manufacturing environment required</li>
<li>Previous night shift experience required</li>
<li>Strong oral and written communication skills.</li>
<li>Demonstrated ability to lead, coach, and mentor within a team environment.</li>
<li>Proven ability to work with minimal supervision and manage time effectively.</li>
<li>Ability to multitask and prioritize work in a dynamic environment.</li>
<li>Proficiency in basic computer applications and internet functions.</li>
<li>Valid Driver's License with an acceptable driving record (2 or fewer moving violations in the past 3 years and no DWI/DUI in the past 5 years).</li>
<li>Must have reliable transportation.</li>
<li>Ability to work flexible hours, including overtime, weekends, and holidays, as required.</li>
<li>Must be able to pass a pre-employment background check and drug screen.</li>
</ul>
Physical Requirements/Work Environment
<ul>
<li>While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift</li>
<li>Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance</li>
<li>Work for up to 10 hours in elements such as hot/cold warehouse/shop environment</li>
<li>Must be able to use hands for assembly and tool usage</li>
<li>Exposure to noise and warehouse elements</li>
<li>Safeguard self with Personal Protective Equipment (PPE) – safety-toed shoes, safety apparel, eye protection (glasses, goggles, and/or facemask) as necessary for task</li>
</ul>
 Schedule
<ul>
<li>Monday – Saturday: 6 pm – 6 am</li>
</ul>
Why Join Our Team? We offer a competitive salary, comprehensive benefits package, and a supportive work environment where your contributions are valued. You'll have the opportunity to grow your career and make a significant impact on our operations.

Shop Foreman - Night Shift

<h3>Job Description</h3>
Job DescriptionTop Job Located in Roseville, MN Salary: $19-22 Express Employment Professionals in Woodbury, Mn is seeking a Parts Prepper for a great company in the East Metro Area! Pay: $19-22 per hour Schedule: 2nd shift: M-Th 3:30pm-2am Parts Prepper Duties: 
<ul>
<li>Inspect parts for previous damage and complete paperwork to ensure proper steps are followed. </li>
<li>Clean, mask, plug, and fixture components prior to paint and powder coat application.</li>
<li>Work with others to prep parts properly.</li>
<li>Maintain equipment and keep work area in order.</li>
<li>Operate batch ovens according to work order specifications.</li>
<li>Inspect parts after coating is complete.</li>
<li>Unmask, unplug, and package components as needed.</li>
</ul>
 Parts Prepper Skills and Experience Required: 
<ul>
<li>High school diploma, GED, or equivalent.</li>
<li>Previous experience working in a paint shop a plus.</li>
<li>Perform basic math calculations.</li>
<li>Forklift experience a plus.</li>
<li>Possess strong attention to detail.</li>
<li>Ability to stand for 9+ hours a day.</li>
<li>Must be able to use hands to position parts in place.</li>
<li>Bend and lift, loading and unloading work pieces on to pallets, and move from one workstation to another, alternately sitting and standing.</li>
<li>Lift objects up to 50 pounds throughout the day.</li>
<li>Must wear required Personal Protective Equipment.</li>
</ul>
 If interested in this position and others that we have to offer please give us a call at 651.731.9328! We look forward to hearing from you! #2000LI Express Office: Woodbury 650 Commerce Drive Suite 135 Woodbury, MN 55125

Powder Coat Paint and Parts Prep

<h3>Job Description</h3>
Job DescriptionPLC Programmer - Allen Bradley
PLC Programmer
Location: Midland, TX&nbsp;
We offer housing assistance, we have company housing you can stay at for a few months while you get situated if you have to relocate. &nbsp;
You'll be travelling from your house to the client site throughout the week - most of our clients are within 45 mins of Midland.&nbsp;
Position Overview We are seeking a skilled PLC Programmer to join our dynamic team. The ideal candidate will be responsible for designing, developing, and maintaining PLC programs to ensure the efficient operation of our automation systems, particularly in the Oil &amp; Gas industry. This role requires a strong understanding of PLC programming and related technologies to optimize system performance and reliability. Key Responsibilities
<ul>
<li>Design, develop, and implement PLC programs for various automation systems.</li>
<li>Troubleshoot and resolve issues with existing PLC systems and programs.</li>
<li>Collaborate with engineers and technicians to integrate PLCs with HMI and SCADA systems.</li>
<li>Utilize software tools such as Allen Bradley, Redlion, and Crimson for programming and configuration.</li>
<li>Conduct testing and validation of PLC programs to ensure they meet project specifications.</li>
<li>Document programming changes and maintain accurate records of PLC configurations and updates.</li>
<li>Provide support for field installations and commissioning of PLC systems.</li>
</ul>
Qualifications
<ul>
<li>Bachelor's degree in Electrical Engineering, Computer Science, or a related field would be nice but not required.</li>
<li>Proven experience in PLC programming, particularly with Allen Bradley controllers.</li>
<li>Familiarity with Redlion, Crimson, HMI, and SCADA systems.</li>
<li>Knowledge of EasyBuilder software is a plus.</li>
<li>Experience in the Oil &amp; Gas industry is highly desirable.</li>
<li>Strong problem-solving skills and ability to work in a team environment.</li>
</ul>
Benefits
<ul>
<li>Vehicle</li>
<li>Company Card</li>
<li>No 401k Offered</li>
<li>2 weeks starting PTO</li>
<li>Health / Medical / Dental / Vision</li>
<li>Quarterly Bonuses (for safety and good paperwork)&nbsp;</li>
<li>EOY Bonus (not guaranteed)&nbsp;</li>
<li>Housing provided for 3-6 months if needed</li>
</ul>
 - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 11/26/2024 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. &nbsp;CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at <a href="mailto:Benefits@CyberCoders.com" target="_blank">Benefits@CyberCoders.com</a> to make arrangements.

PLC Programmer - Allen Bradley

<h3>Job Description</h3>
Job Description
Join a family-friendly manufacturing team in SE Portland where youll make an impact through costing, analysis, and financial reporting. This role works closely with the Controller and owner, offering exposure to the executive teamwhile supporting both operations and finance.
What Youll Do:
<ul>
<li>
Analyze and input cost data, identify variances, and prepare budgeting reports
</li>
<li>
Review profit margins, inventory reconciliations, and assist with month/year-end close
</li>
<li>
Support Accounts Payable/Receivable and prepare progress billings
</li>
</ul>
What Were Looking For:
<ul>
<li>
Bachelors in Accounting or Finance
</li>
<li>
2+ years manufacturing accounting experience (costing preferred)
</li>
<li>
Advanced Excel and strong attention to detail
</li>
<li>
Reliable and team-oriented
</li>
</ul>
Benefits:
<ul>
<li>
hourly employee = overtime,PTO from day one, paid holidays, medical/dental/vision/life, 401K w/ match, paid leave
</li>
<li>
Casual, team-focused environment *This is a fully in-office work structure
</li>
</ul>
#LIRS1 Company DescriptionA Winner of Inavero’s Diamond Award 2016-2021 Best of Staffing® Client and Talent Awards for providing superior service to our clients and job seekers and an Inc. 500 honoree three consecutive years from 2007-2009, Incendia provides recruiting and staffing services to companies that have resource or hiring needs. Incendia Partners, the most progressive provider of recruiting and staffing services is fueled by a single purpose: finding the solution to your staffing needs. With over 20 years of recruiting experience, we use our talent to find the talent you need. Our simple, straightforward process cuts through the clutter, arming you with the right facts for maximum efficiency. We help you fill more positions faster, all while never sacrificing the personal touch that sets us apart from the rest. Whether you’re a business looking for full-time, contract, contract-to-hire or just need hourly or project based recruiting services in Software &amp; IT, Accounting &amp; Finance, Human Resources, or just about any position you're hiring for, or you are a professional looking for your next great career opportunity, Incendia will fire on all cylinders until you meet your match. 
<h3>Company Description</h3>
A Winner of Inavero’s Diamond Award 2016-2021 Best of Staffing® Client and Talent Awards for providing superior service to our clients and job seekers and an Inc. 500 honoree three consecutive years from 2007-2009, Incendia provides recruiting and staffing services to companies that have resource or hiring needs. \r\n\r\nIncendia Partners, the most progressive provider of recruiting and staffing services is fueled by a single purpose: finding the solution to your staffing needs. \r\n\r\nWith over 20 years of recruiting experience, we use our talent to find the talent you need. Our simple, straightforward process cuts through the clutter, arming you with the right facts for maximum efficiency. We help you fill more positions faster, all while never sacrificing the personal touch that sets us apart from the rest. Whether you’re a business looking for full-time, contract, contract-to-hire or just need hourly or project based recruiting services in Software &amp; IT, Accounting &amp; Finance, Human Resources, or just about any position you're hiring for, or you are a professional looking for your next great career opportunity, Incendia will fire on all cylinders until you meet your match.

Manufacturing Accountant

<h3>Job Description</h3>
Job DescriptionCompensation: $110/hr Job Title: Execution Planning Engineer II / III Location: Midland, TX Schedule: Monday–Friday, 40 hrs/week | ~95% Office / ~5% Field &nbsp;Position Overview We are seeking an Execution Planning Engineer III with 10–15 years of oil &amp; gas project experience to support upstream operations in the Delaware Basin. This role focuses on execution planning, cost/schedule alignment, and regulatory deliverables while leading OIMS/EMCAPS stewardship, mentoring engineers, and ensuring project safety and efficiency.Key Responsibilities
<ul>
<li>Support PSMS principles to eliminate Life Altering Hurts.</li>
<li>Lead execution planning: cost, schedule, permitting, scope, procurement, and execution strategy.</li>
<li>Track and resolve pre-G3 deliverables and schedule changes across stakeholders.</li>
<li>Drive OIMS/EMCAPS stewardship, including gate review prep, design &amp; execution plan development, and change management.</li>
<li>Represent Delaware Projects in development alignment efforts, early LLE identification, and regulatory coordination.</li>
<li>Mentor Execution Engineers, support PCM/LS2Spud work processes, and participate in permitting/ALT/IWT/DUR meetings.</li>
<li>Conduct limited field walks and submit safety observations.</li>
</ul>
Qualifications
<ul>
<li>BS in Engineering or related technical field.</li>
<li>10–15 years’ experience in project execution/planning (Project Engineer, Construction Engineer, Project Controls Engineer, Execution Engineer).</li>
<li>Strong background in cost/schedule management, regulatory deliverables, and stakeholder alignment.</li>
<li>Demonstrated leadership in PSMS, OIMS, EMCAPS, and project safety.</li>
</ul>
Powered by JazzHR
aI69kqQ9U0

Execution and Planning Engineer II / III

<h3>Job Description</h3>
Job Description
Sr. CAD Drafter - REVIT &amp; AutoCAD
URGENT NEED!
Significant experience in electrical clash detection / BIM modeling strongly preferred. 
About Us
We are a mission critical solutions provider delivering high-performance infrastructure for data centers, critical facilities, and other power-intensive environments. Our team supports the design and delivery of complex electrical systems that demand precision, speed, and reliability.
Position Summary
We are seeking a highly skilled CAD Drafter with a strong background in electrical drafting to join our Austin-based team. This role plays a key part in the development of electrical documentation including one-line diagrams, schematics, equipment layouts, and more. Ideal candidates thrive in fast-paced environments and are eager to contribute to critical infrastructure projects across the U.S.
Key Responsibilities
<ul>
<li>
Draft and develop detailed electrical drawings: one-lines, schematics, panel schedules, and switchgear/equipment layouts.
</li>
<li>
Use AutoCAD and Revit (latest versions) to create accurate and efficient designs.
</li>
<li>
Produce fast field and conceptual sketches based on engineer input or field data.
</li>
<li>
Assist in light 3D modeling as needed for spatial coordination.
</li>
<li>
Build and manage block libraries to streamline drafting processes and increase efficiency.
</li>
<li>
Collaborate with engineers and project managers to meet tight deadlines on complex projects.
</li>
<li>
Maintain accuracy and consistency across all drawing packages.
</li>
<li>
Occasionally travel (&lt;15%) to job sites or partner locations for field coordination.
</li>
</ul>
Qualifications
<ul>
<li>
Proficient in the latest versions of AutoCAD and Revit.
</li>
<li>
3+ years of electrical drafting experience in mission critical, industrial, or commercial projects.
</li>
<li>
Strong knowledge of electrical layouts, one-lines, schematics, and panel schedules.
</li>
<li>
Familiarity with equipment and switchgear layouts.
</li>
<li>
Experience building and maintaining CAD block libraries.
</li>
<li>
Ability to work effectively in a high-speed, collaborative environment.
</li>
<li>
Excellent organizational and communication skills.
</li>
<li>
Must be located in or willing to relocate to Austin, TX or Dallas, TX
</li>
</ul>
Preferred Qualifications
<ul>
<li>
Experience working in mission critical environments (e.g., data centers, hospitals, or critical infrastructure).
</li>
<li>
Exposure to BIM coordination or similar workflows.
</li>
</ul>
#Construction
#Midsenior #Libertyjobs

Sr. CAD Drafter - REVIT & AutoCAD

<h3>Job Description</h3>
Job Description
Job Summary
<ul>
<li>Performs various maintenance duties and handles service requests requiring technical labor skills.</li>
</ul>
General Accountabilities
<ul>
<li>Inspects, operates, or tests machinery or equipment to diagnose machine malfunctions.</li>
<li>Dismantles machines, equipment, or devices to access and remove defective parts.</li>
<li>Performs routine maintenance.</li>
<li>Diagnoses mechanical problems in PLC, Electrical Drivers and determines how to correct them.</li>
<li>Repairs machines, equipment, or structures.</li>
<li>Maintains or repairs specialized equipment or machinery.</li>
<li>Assembles, installs, or repairs wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment.</li>
<li>Orders parts, supplies, or equipment.</li>
<li>Plans and lays out repair work, using diagrams, drawings, blueprints, maintenance manuals, or schematic diagrams.</li>
<li>Performs general cleaning duties of buildings or properties.</li>
<li>Records type and cost of maintenance or repair work.</li>
<li>The company reserves the right to add or change duties at any time.</li>
</ul>
Job Qualifications
<ul>
<li>Education: High school diploma or equivalent</li>
<li>Experience: 1-2 years of related experience</li>
</ul>
Skills
<ul>
<li>Equipment maintenance</li>
<li>Repairing</li>
<li>Troubleshooting</li>
<li>Critical thinking</li>
<li>Equipment selection</li>
</ul>
Company Description<a href="http://www.industrialgp.org" target="_blank">www.industrialgp.org</a> 
<h3>Company Description</h3>
<a href="http://www.industrialgp.org" target="_blank">www.industrialgp.org</a>

Electro Mechanical Maintenance Technician

<h3>Job Description</h3>
Job Description
Injection Molding Setup Tech Full Time
Education: High School Diploma or Equivalent
Salary: Based On Experience. starting at $30.00
Hours: 2rd shift 2:00 pm-12:00 am Monday-Thursday
Experience: 2+ years’ experience setup/ start up and operation of injection molds and production control in accordance with schedule and set-up requirements. This is a full-time position. Job Responsibilities:
· Sets up and startup of molds for injection molding machines.
· Perform mold change over activities in quick change environment.
· Operates press for the manufacture of production orders per work instruction.
· Organizes/sets up workstations in manufacturing areas as required.
· Troubleshoot plastic injection mold and start-up activities.
· Instructs machine operators and assemblers on correct and safe operations of machines and auxiliary equipment.
· Works on set-up productivity improvement projects.
Skills and Requirements:
· Knowledge of plastic injection molding equipment, plastics resins and molds.
· Knowledge of set-up and tear-down procedures of molds.
· Two years of set-up experience preferred.
· Ability to read/understand work instructions and do basic math.
· Good interpersonal skills.
· Requires standing, repeated reaching and twisting, hand movement throughout entire shift.
· Requires lifting and moving materials of up to 75 lbs.
Company DescriptionVistaTek is a 2nd generation family owned mold making and injection molding company. VistaTek takes a lot of pride in a progressive work environment. VistaTek strives for ways to improve, and looks directly to its employees for their opinions and expertise to help in decisions for equipment, software, and procedures. We are always looking for more people to help with VistaTek's continued success. 
<h3>Company Description</h3>
VistaTek is a 2nd generation family owned mold making and injection molding company. VistaTek takes a lot of pride in a progressive work environment. VistaTek strives for ways to improve, and looks directly to its employees for their opinions and expertise to help in decisions for equipment, software, and procedures. We are always looking for more people to help with VistaTek's continued success.

5,312 Manufacturing Jobs in Wapello County