<h3>Job Description</h3>
Job Description
InDyne is a full-service military, civilian and commercial operations company. Our Mission is to provide tailored cost effective, quality services and solutions. Our Vision is to exceed customer expectations by delivering results through agility, flexibility and responsiveness. Our Core Values include integrity, trust and loyalty.
RT&amp;T, a joint venture of InDyne, Inc. and Amentum Services, Inc. is the prime contractor to support the Atlantic Range Technical Support Services (ARTSS) for the Naval Air Warfare Center Aircraft Division (NAWCAD) headquartered in Patuxent River, MD, and with locations in Maryland, Virginia, and California.
ARTSS supports Atlantic Test Ranges (ATR) and Atlantic Targets and Marine Operations (ATMO) in research and development, engineering, maintenance, operation, support of facilities, systems, and equipment in order to meet the engineering development and operational testing and fleet training missions for some of the world’s premier systems. Our work with the U.S. Navy keeps the warfighter safe by testing systems before they are used in combat, and we are hiring personnel to support this important mission.
Background Information:
This full-time position serves as an onsite Engineering Technician supporting the Telemetry Acquisition Team at the Atlantic Test Range (ATR) in Patuxent River, Maryland. ATR is the Navy’s East Coast open-air test range and supports aviation, weapons system, and experimentation test and evaluation (T&amp;E) events as well as warfighter training exercises. ATR provides real-time T&amp;E services including data acquisition, instrumentation, data analysis, recording, test management, and airspace management to DoD and commercial customers. Come work in an innovative, dynamic, and fast-paced environment with rewarding technical challenges to solve every day!
Duties &amp; Responsibilities:
<ul>
<li>Support real-time flights which will occasionally require overtime</li>
<li>Troubleshoot telemetry antenna and supporting equipment/instrumentation issues during real-time flights</li>
<li>Support remote missions (requires frequent travel)</li>
<li>Work with basic hand/power tools</li>
<li>Operate and maintain Antenna Telemetry Acquisition Systems (ATAS) and Telemetry Acquisition Systems (TAS)</li>
<li>Operate oscilloscopes, spectrum analyzers, receivers, and transmitters</li>
<li>Performs the installation, calibration, operation, and maintenance of telemetry antennas and associated equipment</li>
<li>Sets up signal frequency parameters and monitors the signal strength and data quality</li>
</ul>
Note: This job description describes the general nature of the duties and requirements of the job. It is not intended to be an exhaustive list or to limit the supervisor's ability to modify work assignments as appropriate.
Education, Experience, Skills, &amp; Certification Requirements:
<ul>
<li>High School Diploma or equivalent</li>
<li>Engineering/Electronics Technician AA/AS degree or related curriculum from an accredited college or university or successful completion of technical school, trade school, or advanced armed services technical school or successful completion of at least 30 semester hours (45 quarter hours) of courses from an accredited college.</li>
<li>To qualify as an Engineering Technician II:
<ul>
<li>A minimum of 3 years of work experience performing the stated or similar function.</li>
<li>A minimum of 2 years of the stated experience may include wiring of electrical components such as data acquisition units; fabrication of wire harnesses; soldering of PC boards and other components.</li>
</ul>
</li>
<li>To qualify as an Engineering Technician III:
<ul>
<li>A minimum of 5years of work experience performing the stated or similar function.</li>
<li>A minimum of 4 years of the stated experience must include wiring of electrical components such as data acquisition units; fabrication of wire harnesses; soldering of PC boards and other components.</li>
</ul>
</li>
<li>Must be able to work overtime and travel 50-75% on trips lasting anywhere from a few days up to month</li>
<li>Basic electrical and electronics theory, practice, and repair/service experience is preferred</li>
<li>Must be flexible and team-oriented</li>
<li>Must be a self-starter and use initiative to undertake assignments with minimal supervision</li>
<li>Must have effective oral and written communication skills</li>
<li>Must possess a valid driver’s license and successfully pass drug screening</li>
</ul>
Clearance Requirement:
<ul>
<li>Currently hold or be able to obtain and maintain the proper US DoD issued security clearance, which requires US Citizenship. Security clearance eligibility may be discussed during the interview phase.</li>
<li>Employment and start date is contingent upon the candidate receiving the required US DoD issued interim security clearance</li>
</ul>
Work Conditions:
Conditions may vary. Most work is performed in enclosed buildings, but some outside work may be required. Work will include sitting, standing, walking, lifting and reaching. Applicant should be capable of lifting 50-100 lbs. assisted by other employees. Vision abilities needed to perform this job include close vision, depth perception, and the ability to adjust and focus. Some overtime or travel may be required.
Benefits Include:
<ul>
<li>Medical, Dental, Vision, 401(k), Life/AD&amp;D/STD/LTD Insurance</li>
<li>Tuition and Training Assistance Program</li>
<li>Employee Assistance Program (EAP)</li>
<li>Paid Vacation, Sick Leave, and 11 Paid Holidays</li>
<li>Flexible Work Schedule</li>
<li>10-year Contract</li>
</ul>
****InDyne is an Affirmative Action/Equal Opportunity Employer. Women, minorities, veterans, and individuals with disabilities are encouraged to apply. Any person with a disability needing special accommodations to the application process please call our Human Resources department

Engineering Technician II/III (TM-Ops) #697

<h3>Job Description</h3>
Job Description
We are looking for skilled Production Operators with at least 1 year of experience in manufacturing and experience in mechanical troubleshooting at our facility in Medina, OH.
Our technicians are responsible for operating and maintaining plastic injection blow molders and extrusion machines, ensuring our products meet all quality standards and customer expectations.
What Production Technicians do:
<ul>
<li>
Operating extrusion and blow-molding manufacturing production machines and equipment.
</li>
<li>
Monitoring and adjusting production machine settings (heat control, water cooling temperatures, hydraulic pressure) to keep production running smoothly.
</li>
<li>
Troubleshooting machines and doing basic maintenance.
</li>
<li>
Checking product quality to assure it meets customer specifications (e.g., bottle weights, dimensions).
</li>
<li>
Teaming up with your co-workers to find smarter ways to do things.&nbsp;
</li>
</ul>
What’s needed to be a Production Technician?
<ul>
<li>
Mechanical inclination – you like to fix things, use tools, work with your hands.
</li>
<li>
At least 1 year of experience operating manufacturing equipment in a high-volume production environment.&nbsp;&nbsp;
</li>
<li>
Knowledge of extrusion or blow molding machines and equipment is a plus!
</li>
<li>
Basic understanding of hydraulics, pneumatics, and electromechanical systems is a plus!
</li>
<li>
Strong problem-solving and mechanical troubleshooting skills.
</li>
<li>
Ability to lift up to 50 lbs. with or without a reasonable accommodation.
</li>
</ul>
What we offer:
<ul>
<li>
Direct Hire: This is a permanent placement, with benefits starting on day 61.
</li>
<li>
Benefit Packages: Options to select plans made to fit your family’s needs, including; 401k, PTO, medical, vision &amp; dental.
</li>
<li>
Stability: While other companies are laying off, we’re hiring to keep our business strong – even during uncertain economic times. &nbsp;
</li>
<li>
Tuition Reimbursement: Continue your education on us and pave a way for career advancement.
</li>
</ul>
Shifts:
<ul>
<li>
Monday-Friday 7am-3pm
</li>
<li>
3-2-2-3 7am-7:30pm (3 days on, 2 days off, 2 days on, 3 days off)
</li>
</ul>
Pay: $20.00+/hr, depending on experience
As a Plastipak Associate, you receive a benefits package offering the following:
<ul>
<li>Wellness Programs</li>
<li>Health Insurance Coverage, including Medical, Dental &amp; Vision</li>
<li>EAP, Employee Assistance Program</li>
<li>Life Insurance</li>
<li>Accidental Death &amp; Dismemberment Insurance</li>
<li>Disability Insurance:&nbsp; Short-Term &amp; Long-Term</li>
<li>Accidental Insurance</li>
<li>Critical Illness Insurance</li>
<li>Hospital Indemnity Insurance</li>
<li>401(k) Plan, with Company Matching Contribution &amp; Profit Sharing feature</li>
<li>Paid Time Off&nbsp;&nbsp;&nbsp; - 80 hours within 1st year &amp; subsequent increases</li>
<li>Paid Company Holidays</li>
<li>Dependent Care Flexible Spending Account</li>
<li>Caregiving via Care.com</li>
<li>Pet Insurance</li>
<li>Tuition Assistance Program</li>
<li>Sons and Daughters Scholarship Program</li>
<li>Travel Assistance</li>
<li>Employee Discount Programs</li>
</ul>
*Some benefits are subject to eligibility requirements
Plastipak is an Equal Opportunity Employer
In order to process your job application, Plastipak collects and stores the personal information that you submit via this website. Please refer to Plastipak’s Privacy Policy to understand how Plastipak uses and protects the information that you provide.

Production Operator - Day shift

<h3>Job Description</h3>
Job Description
As a Maintenance Technician, you perform, monitor &amp; evaluate preventative maintenance plans, while continually work towards improving equipment &amp; processes. At our company, Associates take pride in maintaining our high standards of quality products and our positive team culture.&nbsp; We’re also proud to be recognized as an America’s Safest Companies by EHS Today.&nbsp;
We Offer
<ul>
<li>Advancement: We prioritize promote-from-within!</li>
<li>State-of-the-Art Equipment: Work with our top of the line blow molding equipment from industry leaders, such as Sidel!</li>
<li>Convenience:&nbsp; We’re located right off of I-4 on County Line Road!</li>
</ul>
You Will
<ul>
<li>Perform maintenance for blow molding molding manufacturing equipment to assure uninterrupted &amp; optimal operations</li>
<li>Execute &amp; continuously improve preventative maintenance procedures</li>
<li>Participate in changeovers, ensuring efficient &amp; correct execution</li>
<li>Repair &amp; rebuilds spare parts</li>
<li>Assure compliance with all safety protocols, quality standards, operational practices &amp; procedures</li>
<li>Expand your expertise through formal training &amp; on-the-job experiences, including new equipment installation &amp; equipment modification projects</li>
</ul>
You Have
<ul>
<li>Ability to work 12 hour nights: 6:45pm-7:15am on a rotating 2-2-3 schedule, along with overtime, as needed</li>
<li>High School Diploma, GED or equivalent</li>
<li>A minimum of three (3) years of experience maintaining manufacturing equipment.&nbsp;</li>
<li>Experience with Sidel, Palletizer &amp; Airveyor is preferred.</li>
<li>Solid hydraulics, pneumatics and electrical knowledge, along with the ability to troubleshoot &amp; problem solve</li>
<li>Ability to interpret technical &amp; operational documents, including manuals, blueprints, schematics</li>
<li>Ability to lift up to 75 pounds and work on aerial platforms up to 20 feet with or without reasonable accommodation</li>
</ul>
You’ll Earn 
<ul>
<li>$28 &amp; up, based on experience</li>
<li>Night shift includes a shift differential of $0.75</li>
</ul>
As a Plastipak Associate, you receive a benefits package offering the following:
<ul>
<li>Wellness Programs</li>
<li>Health Insurance Coverage, including Medical, Dental &amp; Vision</li>
<li>EAP, Employee Assistance Program</li>
<li>Life Insurance</li>
<li>Accidental Death &amp; Dismemberment Insurance</li>
<li>Disability Insurance:&nbsp; Short-Term &amp; Long-Term</li>
<li>Accidental Insurance</li>
<li>Critical Illness Insurance</li>
<li>Hospital Indemnity Insurance</li>
<li>401(k) Plan, with Company Matching Contribution &amp; Profit Sharing feature</li>
<li>Paid Time Off&nbsp;&nbsp;&nbsp; - 80 hours within 1st year &amp; subsequent increases</li>
<li>Paid Company Holidays</li>
<li>Dependent Care Flexible Spending Account</li>
<li>Caregiving via Care.com</li>
<li>Pet Insurance</li>
<li>Tuition Assistance Program</li>
<li>Sons and Daughters Scholarship Program</li>
<li>Travel Assistance</li>
<li>Employee Discount Programs</li>
</ul>
*Some benefits are subject to eligibility requirements
Plastipak is an Equal Opportunity Employer
In order to process your job application, Plastipak collects and stores the personal information that you submit via this website. Please refer to Plastipak’s Privacy Policy to understand how Plastipak uses and protects the information that you provide.

Blow Mold Maintenance Technician Night Shift

<h3>Job Description</h3>
Job Description
We are&nbsp;seeking a Shop Manager to join our team!&nbsp;You will oversee the activities of a team of production workers.
Responsibilities:
<ul>
<li>Coordinate the daily activities of the production and operation teams</li>
<li>Delegate production assignments to appropriate teams and personnel</li>
<li>Place production orders from customers</li>
<li>Inspect all materials and equipment to detect malfunctions</li>
<li>Adhere to all&nbsp;safety policies and procedures</li>
</ul>
​Qualifications:
<ul>
<li>Previous experience in&nbsp;production, manufacturing, or other related fields</li>
<li>Knowledge of production tools and equipment</li>
<li>Strong leadership qualities</li>
<li>Excellent written and verbal communication skills</li>
</ul>

Shop Manager

<h3>Job Description</h3>
Job Description
Hands-on Supervisor at a fast-paced, modern equipped, stone manufacturing plant. Great benefits and room for growth. Responsibilities include monitoring shop intake of shop orders, seeing through that production of products in on schedule and meeting shop order details, enforcing a safe environment, effectively managing logistics for products readiness for packaging and dispatch, meeting schedules, and offering a high-level quality of the products produced. Tasks will result in an efficient workflow, reduce losses, and successful supply of products to the field workforce. Work closely with the production team, shop management, warehouse and project management to increase productivity and profitability within the manufacturing operations of the company.
Responsibilities:
<ul>
<li>Provide positive and motivational supervision.</li>
<li>Successfully steer the day-to-day products from intake to site delivery.</li>
<li>Maintaining the company's quality standards and offer continued improvements.</li>
<li>Responsible for identifying any production constraints and assist in finding solutions to meet schedules.</li>
<li>Maintain safety program in associated work areas.</li>
<li>Meet with project managers and construction teams on job sites as needed.</li>
<li>Understand workforce changes as required and in accordance with the workload.</li>
<li>Review shop drawings and cut tickets prior to fabrication to ensure understanding during QC inspections.</li>
<li>Assure tools and machinery maintenance and logs are current.</li>
</ul>
Qualifications:
· Minimum 2 years’ experience in a manufacturing environment (granite, millwork, finish metals etc.)
· Ability to create, read and review shop orders, details for fabrication.
· Experience operating hand power tools a plus
· Familiarity with tools.
· Good English and Spanish language, English writing.
· Previous experience/broad understanding of safety systems and enforcement of safety rules and policies.
Attributes necessary for success:
· Multi-tasking ability will be one of the most necessary attributes.
· Organized and neat.
· Good team building and coaching skills.
· Works well with others in a collaborative environment
· Understanding the principles and applications associated with manufacturing operations, maintenance.
· Good time management.
· A problem-solving mindset and ability to work in a fast-paced environment.
· Interpersonal, communication and listening ability is important.
· Motivator results are oriented and driven.
Company DescriptionGeneral Contractor specializing in Architectural Natural Stone. With national contracts, international imports and two generations of business experience Twin Stone continues to expand and seeks enthusiastic personnel to grow with the company. 
<h3>Company Description</h3>
General Contractor specializing in Architectural Natural Stone. With national contracts, international imports and two generations of business experience Twin Stone continues to expand and seeks enthusiastic personnel to grow with the company.

PRODUCTION & QC SUPERVISOR

<h3>Job Description</h3>
Job DescriptionJOB SUMMARY The purpose of the Slitter Operator position is to convert in-process or finished master rolls per production order and customer's specifications. JOB DESCRIPTION A Slitter Operator is responsible for the preparation and processing of material in and out of the Slitting Operation.
<ul>
<li>Follow all Tekniplex plant safety rules and standards.</li>
<li>Maintain good housekeeping practices.</li>
<li>Comply with Good Manufacturing Practices (GMP).</li>
<li>Load a machine payoff using an overhead hoist and thread the material through the machine initially by hand and then jogging it through the cutting press.</li>
<li>Input data into the shop floor PC, check and validate labels are correct from computer on to the corresponding rolls.</li>
<li>Selects, cleans, install spacers and knives on shafts.</li>
<li>Threads sheeting through slitter and verifies dimension of slit specifications.</li>
<li>Secures slit strips on cores, adjusts guides and roller tension, thread edge trim to scrap winder and start machine.</li>
<li>Observes slitting and rewinding operation and examines cut strips for flatness, wrinkles and other defects.</li>
<li>Will observe the machine and is required to communicate scrap, mechanical or quality issues timely.</li>
<li>Responsible for arranging stacking rolls according to packaging specification.</li>
<li>Responsible for meeting standards relating to productivity, quality and scrap daily.</li>
<li>Filling out and submitting required paperwork daily.</li>
<li>Other duties as assigned.</li>
</ul>
QUALIFICATIONS
<ul>
<li>Safety conscious</li>
<li>Comfortable standing for entire shift</li>
<li>Ability to lift up to 50 lbs. repetitively</li>
<li>Previous manufacturing experience preferred</li>
<li>Previous forklift experience is preferred</li>
<li>2 years of experience in manufacturing facility is preferred</li>
<li>Excellent communication skills for this hands-on role</li>
<li>Must be able to read/writing/speak English</li>
<li>Minimum of a High School Diploma</li>
</ul>
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job,
<ul>
<li>The employee is regularly required to stand; walk; use hands to finger, handle, push, pull and carry; and hear.&nbsp;</li>
<li>The employee frequently is required to talk and reach with hands and arms.&nbsp;</li>
<li>The employee will be frequently working with sharp tools, such as knives and ledgers.</li>
<li>The employee is occasionally required to climb or balance and stoop, kneel, or crouch.&nbsp;</li>
<li>The employee must regularly lift and/or move up to 12 pounds, and occasionally lift and/or move up to 50 pounds.</li>
</ul>
WORK&nbsp;ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job,
<ul>
<li>The employee is regularly exposed to moving mechanical parts and vibration.&nbsp;</li>
<li>The employee is occasionally exposed to humid conditions and hot temperature. &nbsp;</li>
<li>The employee is regularly required to work with others, but may occasionally work alone.&nbsp;</li>
</ul>
Tekniplex commits to making reasonable accommodation to the known physical or mental limitations of qualified individuals with disabilities and qualified disabled veterans, unless such accommodation would impose an undue hardship on the conduct of its business.
TRC Talent Solutions is proud to be an Equal Opportunity Employer (EOE). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, protected veteran status, disability status, sexual orientation, gender identity or expression, marital status, genetic information, or any other characteristic protected by law.

Slitter Operator

<h3>Job Description</h3>
Job Description
Position Overview
We are seeking an experienced Senior Electromechanical Design Engineer to join our engineering team. This role requires a highly skilled professional with a strong background in mechanical and electrical systems integration, mechanical design, and product development from concept to production. The ideal candidate will have 10+ years of relevant engineering experience and at least 5+ years of advanced SolidWorks proficiency.
This position plays a key role in the innovation, design, prototyping, and production support of our products, ensuring they meet the highest standards for quality, performance, and manufacturability.
Key Responsibilities
<ul>
<li>Lead the design and development of electromechanical systems and components for Phiston’s product line.</li>
<li>Utilize SolidWorks to create detailed 3D models, assemblies, and 2D drawings for manufacturing.</li>
<li>Perform engineering calculations, tolerance analyses, and FEA simulations to ensure product reliability and performance.</li>
<li>Integrate electrical and control systems into mechanical designs, collaborating closely with electrical engineers.</li>
<li>Develop prototypes and oversee testing to validate design functionality and compliance with specifications.</li>
<li>Manage the design process from concept through production, including BOM creation and change control.</li>
<li>Work with manufacturing teams to optimize designs for cost-effective production and assembly.</li>
<li>Ensure designs comply with relevant industry standards, safety regulations, and customer requirements.</li>
</ul>
Qualifications &amp; Skills
Required:
<ul>
<li>Bachelor’s degree in Mechanical Engineering, Mechatronics, or related field (Master’s preferred).</li>
<li>10+ years of professional experience in electromechanical product design.</li>
<li>5+ years of hands-on SolidWorks experience (3D modeling, surfacing, assemblies, drawings).</li>
<li>Strong knowledge of manufacturing processes (machining, sheet metal, plastics, assembly).</li>
<li>Experience with product lifecycle management (PLM) systems.</li>
<li>Proficiency in GD&amp;T, tolerance stack-up, and design for manufacturability (DFM).</li>
<li>Familiarity with electrical system integration (motors, wiring harnesses, sensors).</li>
<li>Excellent problem-solving, organizational, and communication skills.</li>
</ul>
Preferred:
<ul>
<li>Experience in data destruction equipment, security devices, or related industries.</li>
<li>Familiarity with ASME, ISO, and other engineering standards.</li>
<li>Hands-on prototyping and testing experience.</li>
</ul>
Company DescriptionAt Phiston Technologies, Inc., we believe in innovation, proactive product development, and secure destruction of data. We pride ourselves on being the leading physical data destruction company in the United States. Our clients include some of the top tech companies globally, such as Amazon, Facebook, and Salesforce. Our products were engineered in response to the rapid growth of information technology and the inherent rise of data breaches across multiple industries. We deeply understand the standards that government and private entities must follow to protect sensitive information from data security breaches. Our product line-up shows our continued commitment to ever-changing technology and data security demands. We have the only hassle-free automated crushing systems widely reviewed as a necessity in large organizations. Phiston carries a wide array of products from portable desktop destruction destroyers to enterprise-level data center destruction machines. 
<h3>Company Description</h3>
At Phiston Technologies, Inc., we believe in innovation, proactive product development, and secure destruction of data. We pride ourselves on being the leading physical data destruction company in the United States. Our clients include some of the top tech companies globally, such as Amazon, Facebook, and Salesforce.\r\n\r\nOur products were engineered in response to the rapid growth of information technology and the inherent rise of data breaches across multiple industries. We deeply understand the standards that government and private entities must follow to protect sensitive information from data security breaches. \r\n\r\nOur product line-up shows our continued commitment to ever-changing technology and data security demands. We have the only hassle-free automated crushing systems widely reviewed as a necessity in large organizations. Phiston carries a wide array of products from portable desktop destruction destroyers to enterprise-level data center destruction machines.

Senior Electro-Mechanical Design Engineer

<h3>Job Description</h3>
Job DescriptionPack Out Associate Manufacturing Location: Branchburg, NJ Pay Rate: $24 per hour Monday-Friday 7:00AM - 3:30PM Leading flavor manufacturer located in Branchburg, NJ is in need of a Pack Out Associate to join the team on the 1st shift. Duties:
<ul>
<li>Accurately package products into appropriate containers, boxes, or drums according to specifications</li>
<li>Accurately measure and pack liquids and dry products from totes or tanks to fill drums, buckets, bottles, or bags as per batch card</li>
<li>Label and seal finished goods in compliance with internal guidelines and customer requirements</li>
<li>Weigh, measure, and inspect products to ensure accuracy and quality</li>
<li>Maintain cleanliness and organization in the pack out area</li>
<li>Clean vessels (industrial-size mixing bowls)</li>
</ul>
 Requirements:
<ul>
<li>High School Diploma or GED</li>
<li>Prior experience in a packaging, warehouse, or manufacturing environment</li>
</ul>
 Zing Recruiting, a leader in the staffing industry for the past 33 years, continues our vision of ‘linking’ communities through employment. Zing's dedication to the safety, health &amp; well-being of our associates, clients and communities remains our #1 priority. Zing is proud to be an EEOE, M/F/D/V, and we are committed to diversity both in practice and spirit at all levels of the organization. #ZINGNJHV #ZINGZIPCompany DescriptionZing Recruiting is dedicated to delivering candidates and client’s alike a great experience for each unique position. We specialize in finding dedicated professionals with the education, talent, and fresh perspectives – professionals at the top of their game. Professionals who have what it takes to be competitive and innovative in today’s market. We work to match candidates needs and requirements to our clients’ requirements and expectations. We work to find the right “fit” for both candidate and client. 
<h3>Company Description</h3>
Zing Recruiting is dedicated to delivering candidates and client’s alike a great experience for each unique position. We specialize in finding dedicated professionals with the education, talent, and fresh perspectives – professionals at the top of their game. Professionals who have what it takes to be competitive and innovative in today’s market. We work to match candidates needs and requirements to our clients’ requirements and expectations. We work to find the right “fit” for both candidate and client.

Pack Out Associate

<h3>Job Description</h3>
Job DescriptionBenefits: 
<ul>
<li>401(k)</li>
<li>Dental insurance</li>
<li>Health insurance</li>
<li>Opportunity for advancement</li>
<li>Paid time off</li>
<li>Training &amp; development</li>
<li>Vision insurance</li>
</ul>
 Rapid Die Cut is a professional High-Tech Manufacturer and Converter of custom parts made from a variety of non-metal materials. We serve over 20 industries in North America and provide custom parts for hundreds of different applications. If you are looking to excel, or start your career and expand your skills in a high-tech driven manufacturing environment, then this opportunity is for you. We are seeking professional self-starter individuals that have an ambition to learn, excel and grow with RDC. Our open positions are full time (40 hours a week) and part time (18-32 hours a week) Monday-Friday on the day shift. No Weekends and No Nights Ever. Willing to train qualified candidates. Promotion opportunity to grow with the company. Work with a great team and awesome culture in a super clean and organized environment.

CNC Laser and Water Jet Operators

<h3>Job Description</h3>
Job DescriptionCompany Description 
Working at Knobelsdorff
Along with building state-of-the-art projects, we build meaningful careers, lasting opportunities, and teams of dedicated individuals who truly own their work. As a leading turnkey specialty contractor specializing in Automation, Electric, Energy, and Power Services, our team tackles challenging, cutting-edge projects that provide opportunities to build new skills, confidence, and gain valuable hands-on experience in a variety of different industries. We tackle industrial electrical installations, advanced automation systems, and renewable energy solutions.
Since our founding as a family-owned company in 1988, we've grown while staying true to our core values. Starting your career with Knobelsdorff means joining a culture that values your contributions, moves quickly, takes calculated risks, and celebrates team members who step up and own their work.
If you're ready to join a team where your voice matters, your growth is supported, and your impact is celebrated, Knobelsdorff (KE) is the place for you.
Job Description 
Knobelsdorff is seeking a Medium Voltage (MV) Electrical Lead with a strong utility or electrical distribution background to provide technical leadership and mentoring. This individual will serve as a subject matter expert in medium voltage design, installation, and commissioning, supporting our utility, industrial, and infrastructure projects.
The ideal candidate will bring extensive experience in MV systems (5kV–35kV) including underground distribution, substation interfaces, and electrical system design, and will be able to guide crews and junior engineers both in the field and during design reviews. While this role is not field-based full time, it requires occasional site visits and strong collaboration with operations, engineering, and preconstruction teams.
Key Responsibilities
<ul>
<li>Serve as the technical lead for MV electrical scope across multiple projects.</li>
<li>Review and guide the design of medium voltage systems including:
<ul>
<li>Duct banks, riser poles, vaults, cable routing, sizing and terminations, and grounding</li>
<li>Specification and selection of transformers, switchgear, MV apparatus (reclosers, GOAB, etc.), protection and control equipment, and MV Metering.</li>
</ul>
</li>
<li>Mentor and develop field supervisors, foremen, and junior engineers.</li>
<li>Act as a liaison between engineering and field teams—ensuring constructability, code compliance, and clarity.</li>
<li>Collaborate with preconstruction and estimating to review drawings and support bid strategy.</li>
<li>Participate in design reviews, equipment submittals, and utility coordination meetings.</li>
<li>Maintain high standards of electrical safety, code compliance (NEC/NESC), and industry best practices.</li>
<li>Support QA/QC, installation inspections, and occasional field commissioning activities.</li>
<li>Provide technical training to internal staff around MV best practices and lessons learned.</li>
</ul>
Qualifications 
Qualifications
<ul>
<li>The requirements listed in job descriptions are guidelines, not fixed rules. You do not have to satisfy every requirement or meet every qualification listed. If you feel you are an excellent candidate, we encourage you to apply!  </li>
<li>Experience in medium voltage electrical systems in a utility or industrial setting.</li>
<li>Strong knowledge of underground MV distribution, splicing, terminations, and utility standards.</li>
<li>Experience mentoring electrical personnel or leading cross-functional project teams.</li>
<li>Ability to interpret electrical one-lines, schematics, and construction documents.</li>
<li>Familiarity with substation components and MV equipment (padmounts, switchgear, reclosers).</li>
<li>Experience working with utility providers on interconnection and coordination.</li>
<li>Working knowledge of NEC, NESC, and utility design standards.</li>
<li>Proficiency with AutoCAD, Bluebeam, Microsoft Office, and ideally Revit, Procore, or Smartsheets.</li>
</ul>
Preferred Credentials
<ul>
<li>Journeyman or Master Electrician License, OR</li>
<li>Degree in Electrical Engineering, Electrical Construction Management, or related field</li>
<li>OSHA 30 or utility safety certifications</li>
<li>Previous experience at a utility company, electrical contractor, or EPC firm</li>
</ul>
 Additional Information 
Total Rewards Statement
As a full-time employee at Knobelsdorff, you'll have access to a comprehensive benefits package designed to support your health, wellbeing, and future.
<ul>
<li>100% employer-paid health and dental coverage for employees</li>
<li>HSA contributions to support your medical expenses</li>
<li>Company-paid life insurance and disability coverage</li>
<li>401(k) with competitive company match</li>
<li>Profit sharing and performance-based incentives</li>
<li>Paid weekly with competitive wages</li>
<li>PTO, six paid holidays, and education reimbursement</li>
<li>Exclusive employee discounts through Working Advantage</li>
</ul>
We believe your work should be rewarded with more than just a paycheck. At KE, we invest in your total wellbeing.
Physical Requirements
The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodation may be provided for individuals with disabilities.
Typical requirements may include:
<ul>
<li>Ability to sit, stand, kneel, stoop, and walk for extended periods</li>
<li>Ability to work outdoors in extreme weather conditions</li>
<li>Ability to dig, backfill, and lift/carry up to 80 pounds</li>
</ul>
Accessibility: If you need accommodations as part of the employment process, please contact Knobelsdorff Human Resources at 651-923-4970 or via email at <a href="mailto:HR@KEway.com" target="_blank">HR@KEway.com</a>.
Knobelsdorff is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status.
<ul>
<li>Equal Opportunity Employer, including disabled and veterans.</li>
<li>EEO is the Law poster&nbsp;English–&nbsp;Spanish</li>
<li>EEO is the Law Supplement poster&nbsp;English–&nbsp;Spanish</li>
<li>Pay Transparency Policy Statement&nbsp;English</li>
</ul>

2,533 Manufacturing Jobs in Tennessee