<h3>Job Description</h3>
Turner Industries Group is looking for experienced Industrial Boilermakers for maintenance work at a site in the Salt Lake City, UT area. 
<ul>
<li>DISA background and drug screen</li>
<li>NCCER credentials preferred</li>
<li>401K immediately vested, benefits after 60 days, holidays after 90 days, vacation after 1 year</li>
</ul>
General Job Description:
Assembles and disassembles, erects and repairs boilers, tanks, vats, pressure vessels, exchangers and heaters according to blueprint specifications.
Functional Requirements:
Locates and marks reference points for columns and plates on foundation; attaches rigging or signals crane operator to lift parts to specified position; aligns structures or plate sections to assemble boiler frame, tanks or vats; hammers, flame-cuts, files or grinds irregular edges of sections or structural parts to facilitate fitting edges together; bolts structures and sections together; positions drums and headers into supports or bolts supports to frame; aligns water tubes and connects and expands tube ends to drums and headers; bolts casing sections, uptakes, stacks, baffles and such fabricated parts as chutes, air heaters, fan stands, feeding tube, catwalks, ladders, coal hoppers and safety hatch to frame; installs trays in process towers; installs manholes, valves, gauges and feedwater connection in drums to complete assembly of water tube boilers; assists in testing assembled vessels.

Qualification Standards:
<ul>
<li>High school or equivalent</li>
<li>One (1) to four (4) years of experience in specified skill (depending on mechanic level)</li>
<li>Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.)</li>
<li>Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.)</li>
<li>Applicant/employee must not pose a direct threat to the health or safety of others in the workplace</li>
</ul>

Physical Involvement:
May be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions; handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing / sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; seeing with or without correction; hearing with or without correction; wearing respirator and other PPE; work in excessive heat; work in excessive cold; work in loud environment

Mental Involvement:
May be required to do the following: follow set procedures and standards; follow oral/or written directions; knowledge of federal, state and company standards and regulations; ability to read and write; ability to recognize and report safety hazards etc.; interpret written plans and blueprints; applying basic mathematical skills; planning work and selecting proper tools; comparing and understanding differences in the size, shape and form of lines, figures and objects; picturing and evaluating solid objects from drawing or diagrams using standards that can be measured or checked; ability to communicate with others effectively; ability to work in a team and get along with others; ability to learn new tasks; remember processes, maintain focus, and complete tasks; ability to remain calm under pressure; manage time and expectations across multiple projects; ensure that work is done in a consistent manner and in compliance with directions
Work Environment Factors: • Location: industrial maintenance and construction sites • Mobility Barriers to Access Job Site: uneven ground level; obstructed pathways; work performed at low and/or high elevations; work performed in confined areas • Climatic/Environmental Conditions at Job Site: predominately outdoor climate; may be exposed to extreme hot or cold weather, excessive humidity, rain, etc.; various noise levels caused by tools, machinery, equipment, etc.; potential exposure to chemical substances

Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law.

SPECIAL WARNING: PLEASE BE AWARE THAT YOU WILL NOT HAVE TO PAY FOR THIS DRUG/ALCOHOL TEST. PLEASE DO NOT SEND MONEY OR ANYTHING OF VALUE TO PERSONS WHO STATE THAT YOU HAVE TO PAY ANY AMOUNT OF MONEY OR GET A DEBIT/CASH CARD FOR PURPOSES OF THE DRUG/ALCOHOL TEST. IF YOU HAVE ANY QUESTIONS ABOUT THIS, PLEASE CONTACT OUR HIRING OFFICE AT <a href="mailto:TURNERCOMMUNICATIONS@TURNER-INDUSTRIES.COM" target="_blank">TURNERCOMMUNICATIONS@TURNER-INDUSTRIES.COM</a> BEFORE AGREEING TO PAY FOR A DRUG/ALCOHOL TEST
Job Posted by ApplicantPro

Boilermaker

<h3>Job Description</h3>
The experienced boilermaker, with a minimum of 8 years of experience, is responsible for comprehending and utilizing blueprints, sketches, drawings, technical manuals, and work process instructions to install, and repair boilers, and other pressure vessels. This position reports directly to the Leadman or Foreman as assigned.
Essential Duties and Responsibilities:
This position is responsible for the following: Other duties may be assigned. 
<ul>
<li>Test and inspect boiler systems for leaks or defects</li>
<li>Replace or repair valves, using hand and power tools.</li>
<li>Be experienced in using gas torches.</li>
<li>Cleaning of boilers and boiler furnaces.</li>
<li>Inspect assembled vessels and individual components, such as tubes, fittings, valves, controls, and auxiliary mechanisms, to locate any defects.</li>
<li>Install manholes, handholes, taps, tubes, valves, gauges, and feedwater connections in drums of water tube boilers, using hand tools.</li>
<li>Clean pressure vessel equipment, using scrapers, wire brushes, and cleaning solvents.</li>
<li>Install refractory brick in fireboxes.</li>
<li>Use blueprints to determine locations, positions, or dimensions of parts.</li>
<li>Ability to read, interpret and follow procedures. Competent in reading and understanding specifications and drawings.</li>
<li>Wear Personal Protective Equipment (PPE) appropriate to current or daily job duties</li>
<li>Be fit for a respirator </li>
<li>Able to constantly climb stairs and ladders, up to 200 rungs/steps per hour</li>
<li>Access confined spaces.</li>
<li>Complies with the highest level of safety during all stages of project execution to avoid any type of incidents and or accidents.</li>
<li>Walk to, from, and between assigned work areas throughout the scheduled shift.</li>
<li>Endure noise, fumes, dust, and inclement weather. </li>
<li>Work overtime as needed to meet production demands</li>
</ul>
Required Education and Experience:
<ul>
<li>Must possess 8 years of Boiler, heat exchanger, and valve repair experience.</li>
<li>Ability to pass a drug screen.</li>
<li>Ability to obtain DBIDS/TWIC credentials.</li>
</ul>
Working Conditions:
<ul>
<li>Open-air conditions such as noise, hot, and cold, as well as in an office-controlled environment.</li>
<li>May have to visit projects aboard ships, rigs both on and offshore as well as confined spaces. You must wear hearing, eye, and head protection and proper PPE when required.</li>
<li>Visits may require standing on a variety of surfaces and at differing angles, bending over, crouching, and climbing up and over obstructions such as scaffolding, ladders, and internal barge and boat structural members.</li>
<li>Some travel required</li>
</ul>
We provide paid holidays, PTO, paid medical, vision, life, dental, and 401(k) benefits.
Walashek Industrial &amp; Marine Inc. is an EEO/AA/Disability/Vets Employer.
Job Posted by ApplicantPro

<h3>Job Description</h3>
Location : IP Savannah Georgia  Local Only No Per Diem Position Summary:   
Assembles, analyzes defects in, and repairs boilers, pressure vessels, tanks, and vats in the field, following blueprints and using hand tools and portable power tools and equipment.
Duties and Responsibilities:
<ul>
<li>Locates and marks reference points for columns or plates on foundation, using master straightedge, squares, transit, and measuring tape, and applying knowledge of geometry. </li>
<li>Attaches rigging or signals crane operator in lift parts to specified position. </li>
<li>Align structures or plate sections to assemble boiler frame, tanks, or vats, using plumb bobs, levels, wedges, dogs, or turnbuckles.   </li>
<li>Hammers, flame-cuts, files, or grinds irregular edges of sections or structural pats to facilitate fitting edges together. </li>
<li>Bolts or arc-welds structures and sections together. Positions drums and headers into supports or bolts or welds supports to frame.   </li>
<li>Align water tubes, connects, and expands ends to drums and headers, using tube expander. </li>
<li>Bells, beads with power hammer, or welds tube ends to insure leak proof joints. </li>
<li>Bolts or welds casing sections, uptakes, stacks, baffles, and such fabricated parts as chutes, air heaters, fan stands, feeding tube, catwalks, ladders, coal hoppers, and safety hatch to frame, using wrench.  </li>
<li>Installs manholes, valves, gages, and feed water connection in drums to complete assembly of water tube boilers.   </li>
<li>Assists in testing assembled vessels by pumping water or gas under specified pressure into vessels and observing instruments for evidence of leakage.</li>
</ul>
Basic Qualifications:
<ul>
<li>Min 3-5 years of experience as a Boilermaker</li>
<li>Workers should be able to:
<ul>
<li>Work within precise limits or standards of accuracy.</li>
<li>Apply shop mathematics to solve problems.</li>
<li>Plan work and select proper tools.</li>
<li>Compare and see differences in the size, shape, and form of lines, figures, and objects; Picture solid objects from drawings or diagrams.</li>
<li>Perform a variety of duties, which may change often; and rate information using standards that can be measured or checked. </li>
</ul>
</li>
<li>Physically, workers must be able to:
<ul>
<li>Climb and maintain balance on scaffolds and ladders</li>
<li>Reach for, handle, and manipulate objects and materials</li>
<li>Lift and carry objects weighing up to 50 pounds</li>
<li>Stoop, kneel, crouch, and crawl, and see well (either naturally or with correction).</li>
</ul>
</li>
</ul>
Powered by JazzHR
bOCsNdOCPa

<h3>Job Description</h3>
Turner Industries Group is looking for experienced Boilermakers for maintenance and project work near the Saint Paul, MN area.
<ul>
<li>3 to 5 years experience</li>
<li>Must be able to pass background check and drug screen</li>
<li>No per diem or travel, local candidates preferred</li>
</ul>

General Job Description:
Assembles and disassembles, erects and repairs boilers, tanks, vats, pressure vessels, exchangers and heaters according to blueprint specifications.
Functional Requirements:
Locates and marks reference points for columns and plates on foundation; attaches rigging or signals crane operator to lift parts to specified position; aligns structures or plate sections to assemble boiler frame, tanks or vats; hammers, flame-cuts, files or grinds irregular edges of sections or structural parts to facilitate fitting edges together; bolts structures and sections together; positions drums and headers into supports or bolts supports to frame; aligns water tubes and connects and expands tube ends to drums and headers; bolts casing sections, uptakes, stacks, baffles and such fabricated parts as chutes, air heaters, fan stands, feeding tube, catwalks, ladders, coal hoppers and safety hatch to frame; installs trays in process towers; installs manholes, valves, gauges and feedwater connection in drums to complete assembly of water tube boilers; assists in testing assembled vessels.

Qualification Standards:
• High school or equivalent • One to four years of experience in specified skill (depending on mechanic level) • Written pre-employment qualification test • Post-offer drug/alcohol screen and physical evaluation • Hazard Communication orientation/test • Turner Industries Group, LLC indoctrination • OSHA approved corrective eyewear (Z87) • Job site orientation • Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.) • Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.) • Demonstrated proficiency in construction tool use (i.e. grinders, oxy/acetylene torch) • Rigging • National Certification preferred (may be required by client) • Applicant/employee must not pose a direct threat to the health or safety of others in the workplace
Tools/Equipment:
Employee may be required to provide the following: tool box, crescent wrenches, tape, spud wrenches, hammer, tri square, striker, burning goggles, tip cleaners, work gloves, framing square, level, torpedo level, center punch, channel locks, set of combination wrenches, pipe wrench, hacksaw, rain suit

Physical Involvement:
May be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions; handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing / sitting; walking; pushing; bending; kneeling; crouching/squatting; seeing with or without correction; hearing with or without correction; wearing respirator and other PPE; stepstool use; work in excessive heat; work in excessive cold; work in loud environment

Mental Involvement:
May be required to do the following: follow set procedures and standards; follow oral/or written directions; knowledge of federal, state and company standards and regulations; ability to read and write; ability to recognize and report safety hazards etc.; interpret written plans and blueprints; applying basic mathematical skills; planning work and selecting proper tools; comparing and understanding differences in the size, shape and form of lines, figures and objects; picturing and evaluating solid objects from drawing or diagrams using standards that can be measured or checked; ability to communicate with others effectively; ability to work in a team and get along with others; ability to learn new tasks; remember processes, maintain focus, and complete tasks; ability to remain calm under pressure; manage time and expectations across multiple projects; ensure that work is done in a consistent manner and in compliance with directions

Work Environment Factors: • Location: industrial maintenance and construction sites • Mobility Barriers to Access Job Site: uneven ground level; obstructed pathways; work performed at low and/or high elevations; work performed in confined areas • Climatic/Environmental Conditions at Job Site: predominately outdoor climate; may be exposed to extreme hot or cold weather, excessive humidity, rain, etc.; various noise levels caused by tools, machinery, equipment, etc.; potential exposure to chemical substances

Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law.

SPECIAL WARNING: PLEASE BE AWARE THAT YOU WILL NOT HAVE TO PAY FOR THIS DRUG/ALCOHOL TEST. PLEASE DO NOT SEND MONEY OR ANYTHING OF VALUE TO PERSONS WHO STATE THAT YOU HAVE TO PAY ANY AMOUNT OF MONEY OR GET A DEBIT/CASH CARD FOR PURPOSES OF THE DRUG/ALCOHOL TEST. IF YOU HAVE ANY QUESTIONS ABOUT THIS, PLEASE CONTACT OUR HIRING OFFICE AT <a href="mailto:TURNERCOMMUNICATIONS@TURNER-INDUSTRIES.COM" target="_blank">TURNERCOMMUNICATIONS@TURNER-INDUSTRIES.COM</a> BEFORE AGREEING TO PAY FOR A DRUG/ALCOHOL TEST
Job Posted by ApplicantPro

<h3>Job Description</h3>
Senior Structural Engineer: Hartsville, SC 29550
Full Time/Permanent Onsite position
Salary- $136,275.00 To $163,530.00
Signing Bonus- Negotiable
Relocation Package- Full
Reports To: Associate Director, Engineering
Benefits- Dental Insurance/ Medical Insurance/ Vision Insurance/ Life Insurance/ Paid Time Off
Must-Haves
<ul>
<li>Must have a minimum of 15 years experience.</li>
</ul>
<ul>
<li>Must have project management experience.</li>
</ul>
<ul>
<li>Must have industrial structural engineering experience.</li>
</ul>
<ul>
<li>Must stay near Hartsville or relocate to Hartsville</li>
</ul>
<ul>
<li>Must have design experience.</li>
</ul>
Requirements:
<ul>
<li>A bachelors degree in civil engineering</li>
<li>PE license</li>
<li>In-depth working knowledge of heavy industrial facility construction practices. · Comprehensive technical understanding of design applications for structural analysis / design in steel, concrete, and wood.</li>
<li>Project / Construction Management</li>
<li>AutoCAD</li>
<li>Must be physically active, work in confined spaces.</li>
<li>Must be willing to work in a dirty, hot, and very humid environment (Paper Mill).</li>
<li>Must be able to climb ladders and not be afraid of heights.</li>
</ul>
Job Description
While reporting to the Associate Director, Engineering the Senior Structural Engineer will be responsible for design and preparation of plans, specifications, cost estimates, capital authorization applications, selection of materials, equipment and services, construction management, and equipment installation for engineering projects required to expand, modify, or construct new client facilities. Responsible for managing project budget, schedule, and performing jobsite inspections to ensure compliance with design is achieved. Will direct and provide engineering guidance to staff engineers, technicians, and others as required to accomplish the above responsibilities.

Boilermaker CV`s

<h3>Job Description</h3>
Turner Industries Group is looking for experienced Industrial Boilermakers for work at a site in the St. Gabriel, LA area. 
<ul>
<li>Candidates need to have a valid TWIC card</li>
<li>DISA background and drug screen</li>
<li>NCCER credentials preferred</li>
<li>Per diem and relocation are not available for this position</li>
</ul>
General Job Description:
Assembles and disassembles, erects and repairs boilers, tanks, vats, pressure vessels, exchangers and heaters according to blueprint specifications.
Functional Requirements:
Locates and marks reference points for columns and plates on foundation; attaches rigging or signals crane operator to lift parts to specified position; aligns structures or plate sections to assemble boiler frame, tanks or vats; hammers, flame-cuts, files or grinds irregular edges of sections or structural parts to facilitate fitting edges together; bolts structures and sections together; positions drums and headers into supports or bolts supports to frame; aligns water tubes and connects and expands tube ends to drums and headers; bolts casing sections, uptakes, stacks, baffles and such fabricated parts as chutes, air heaters, fan stands, feeding tube, catwalks, ladders, coal hoppers and safety hatch to frame; installs trays in process towers; installs manholes, valves, gauges and feedwater connection in drums to complete assembly of water tube boilers; assists in testing assembled vessels.
Tools/Equipment:
Employee may be required to provide the following: tool box, crescent wrenches, tape, spud wrenches, hammer, tri square, striker, burning goggles, tip cleaners, work gloves, framing square, level, torpedo level, center punch, channel locks, set of combination wrenches, pipe wrench, hacksaw, rain suit

Qualification Standards:
• High school or equivalent • One to four years of experience in specified skill (depending on mechanic level) • Written pre-employment qualification test • Post-offer drug/alcohol screen and physical evaluation • Hazard Communication orientation/test • Turner Industries Group, LLC indoctrination • OSHA approved corrective eyewear (Z87) • Job site orientation • Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.) • Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.) • Demonstrated proficiency in construction tool use (i.e. grinders, oxy/acetylene torch) • Rigging • National Certification preferred (may be required by client)

Physical Involvement:
May be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions; handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing / sitting; walking; pushing; bending; kneeling; crouching/squatting; seeing with or without correction; hearing with or without correction; wearing respirator and other PPE; stepstool use; work in excessive heat; work in excessive cold; work in loud environment

Mental Involvement: 
May be required to do the following: follow set procedures and standards; follow oral/or written directions; knowledge of federal, state and company standards and regulations; ability to read and write; ability to recognize and report safety hazards etc.; interpret written plans and blueprints; applying basic mathematical skills; planning work and selecting proper tools; comparing and understanding differences in the size, shape and form of lines, figures and objects; picturing and evaluating solid objects from drawing or diagrams using standards that can be measured or checked; ability to communicate with others effectively; ability to work in a team and get along with others; ability to learn new tasks; remember processes, maintain focus, and complete tasks; ability to remain calm under pressure; manage time and expectations across multiple projects; ensure that work is done in a consistent manner and in compliance with directions

Work Environment Factors: • Location: industrial maintenance and construction sites • Mobility Barriers to Access Job Site: uneven ground level; obstructed pathways; work performed at low and/or high elevations; work performed in confined areas • Climatic/Environmental Conditions at Job Site: predominately outdoor climate; may be exposed to extreme hot or cold weather, excessive humidity, rain, etc.; various noise levels caused by tools, machinery, equipment, etc.; potential exposure to chemical substances

Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law.

SPECIAL WARNING: PLEASE BE AWARE THAT YOU WILL NOT HAVE TO PAY FOR THIS DRUG/ALCOHOL TEST. PLEASE DO NOT SEND MONEY OR ANYTHING OF VALUE TO PERSONS WHO STATE THAT YOU HAVE TO PAY ANY AMOUNT OF MONEY OR GET A DEBIT/CASH CARD FOR PURPOSES OF THE DRUG/ALCOHOL TEST. IF YOU HAVE ANY QUESTIONS ABOUT THIS, PLEASE CONTACT OUR HIRING OFFICE AT <a href="mailto:TURNERCOMMUNICATIONS@TURNER-INDUSTRIES.COM" target="_blank">TURNERCOMMUNICATIONS@TURNER-INDUSTRIES.COM</a> BEFORE AGREEING TO PAY FOR A DRUG/ALCOHOL TEST
Job Posted by ApplicantPro

<h3>Job Description</h3>
Turner Industries Group is looking for experienced Boilermakers for maintenance near the Baton Rouge, LA area.
<ul>
<li>3 to 5 years experience</li>
<li>Candidates must be able to pass a drug test and background check</li>
<li>NCCER+ is required</li>
<li>No per diem or travel, local candidates preferred</li>
</ul>

General Job Description:
Assembles and disassembles, erects and repairs boilers, tanks, vats, pressure vessels, exchangers and heaters according to blueprint specifications.
Functional Requirements:
Locates and marks reference points for columns and plates on foundation; attaches rigging or signals crane operator to lift parts to specified position; aligns structures or plate sections to assemble boiler frame, tanks or vats; hammers, flame-cuts, files or grinds irregular edges of sections or structural parts to facilitate fitting edges together; bolts structures and sections together; positions drums and headers into supports or bolts supports to frame; aligns water tubes and connects and expands tube ends to drums and headers; bolts casing sections, uptakes, stacks, baffles and such fabricated parts as chutes, air heaters, fan stands, feeding tube, catwalks, ladders, coal hoppers and safety hatch to frame; installs trays in process towers; installs manholes, valves, gauges and feedwater connection in drums to complete assembly of water tube boilers; assists in testing assembled vessels.
Tools/Equipment:
Employee may be required to provide the following: tool box, crescent wrenches, tape, spud wrenches, hammer, tri square, striker, burning goggles, tip cleaners, work gloves, framing square, level, torpedo level, center punch, channel locks, set of combination wrenches, pipe wrench, hacksaw, rain suit

Physical Involvement:
Employee may be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds structures, etc.; reaching in all directions, handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing; sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; crawling; seeing with or without correction; hearing with or without correction
Work Environment Factors:
• Location: industrial maintenance and construction sites
• Mobility Barriers to Access Job Site: uneven ground level; obstructed pathways; work performed at low and/or high elevations; work performed in confined areas 
• Climatic/Environmental Conditions at Job Site: predominately outdoor climate; may be exposed to extreme hot or cold weather, excessive humidity, rain, etc.; various noise levels caused by tools, machinery, equipment, etc.; potential exposure to chemical substances 
Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law.

SPECIAL WARNING: PLEASE BE AWARE THAT YOU WILL NOT HAVE TO PAY FOR THIS DRUG/ALCOHOL TEST. PLEASE DO NOT SEND MONEY OR ANYTHING OF VALUE TO PERSONS WHO STATE THAT YOU HAVE TO PAY ANY AMOUNT OF MONEY OR GET A DEBIT/CASH CARD FOR PURPOSES OF THE DRUG/ALCOHOL TEST. IF YOU HAVE ANY QUESTIONS ABOUT THIS, PLEASE CONTACT OUR HIRING OFFICE AT <a href="mailto:TURNERCOMMUNICATIONS@TURNER-INDUSTRIES.COM" target="_blank">TURNERCOMMUNICATIONS@TURNER-INDUSTRIES.COM</a> BEFORE AGREEING TO PAY FOR A DRUG/ALCOHOL TEST
Job Posted by ApplicantPro

NCCER Boilermaker

<h3>Job Description</h3>
The experienced boilermaker, with a minimum of 6 years of experience, is responsible for comprehending and utilizing blueprints, sketches, drawings, technical manuals, and work process instructions to install, and repair boilers, and other pressure vessels. This position reports directly to the Leadman or Foreman as assigned.Essential Duties and Responsibilities:This position is responsible for the following: Other duties may be assigned.
<ul>
<li>Test and inspect boiler systems for leaks or defects</li>
<li>Replace or repair valves, using hand and power tools.</li>
<li>Be experienced in using gas torches.</li>
<li>Cleaning of boilers and boiler furnaces.</li>
<li>Inspect assembled vessels and individual components, such as tubes, fittings, valves, controls, and auxiliary mechanisms, to locate any defects.</li>
<li>Install manholes, handholes, taps, tubes, valves, gauges, and feedwater connections in drums of water tube boilers, using hand tools.</li>
<li>Clean pressure vessel equipment, using scrapers, wire brushes, and cleaning solvents.</li>
<li>Install refractory brick in fireboxes.</li>
<li>Use blueprints to determine locations, positions, or dimensions of parts.</li>
<li>Ability to read, interpret and follow procedures. Competent in reading and understanding specifications and drawings.</li>
<li>Wear Personal Protective Equipment (PPE) appropriate to current or daily job duties</li>
<li>Be fit for a respirator</li>
<li>Able to constantly climb stairs and ladders, up to 200 rungs/steps per hour</li>
<li>Access confined spaces.</li>
<li>Complies with the highest level of safety during all stages of project execution to avoid any type of incidents and or accidents.</li>
<li>Walk to, from, and between assigned work areas throughout the scheduled shift.</li>
<li>Endure noise, fumes, dust, and inclement weather.</li>
<li>Work overtime as needed to meet production demands</li>
</ul>
Required Education and Experience:
<ul>
<li>Must possess 8 years of Boiler, heat exchanger, and valve repair experience.</li>
<li>Ability to pass a drug screen.</li>
<li>Ability to obtain DBIDS/TWIC credentials.</li>
</ul>
Working Conditions:
<ul>
<li>Open-air conditions such as noise, hot, and cold, as well as in an office-controlled environment.</li>
<li>May have to visit projects aboard ships, rigs both on and offshore as well as confined spaces. You must wear hearing, eye, and head protection and proper PPE when required.</li>
<li>Visits may require standing on a variety of surfaces and at differing angles, bending over, crouching, and climbing up and over obstructions such as scaffolding, ladders, and internal barge and boat structural members.</li>
<li>Some travel required</li>
</ul>
  
<h3>Company Description</h3>
“At LEAD, your career is our top priority. As a leading staffing and recruiting partner, we're dedicated to connecting talented job seekers like you with exciting opportunities and rewarding careers across a variety of dynamic industries. Our team takes the time to understand your unique skills, experience, and professional goals. We then leverage our extensive network and industry expertise to match you with the perfect fit - whether that's a short-term project, long-term contract, or a permanent role. Don't settle for just any job - partner with LEAD and unlock a world of rewarding possibilities. Apply today and let us help you find the perfect fit.”

Boilermaker/Refractory

<h3>Job Description</h3>
Manhattan Mechanical Services / Job Description
Title:                                       A or B Mechanic  
Reports to:                            Foreman
Employment Status:             Non-Exempt (Hourly)
Primary Function:
***Must be a local candidate***
The primary duties of the A or B Mechanic are to perform mechanical work pertaining to equipment and piping systems and components. Must have familiarity with basic rigging operations. The A Mechanic will be expected to work closely with their team to ensure all work is completed with the highest degree of safety and quality. 
Manhattan Mechanical Services is a merit shop contractor supporting a team working environment.  As such, all employees will be required from time to time to perform other duties that they are qualified to perform, outside of this job description and their normal work function.
Work Environment: 
The normal work environment for this position will be in an industrial facility, which has been determined to be a safety sensitive environment.  You will experience exposure to outdoor weather conditions, wearing proper PPE is required for a variety of potential hazards. Every employee’s performance could result in a significant incident affecting the health or safety of other employees, customers, customer’s employees, the public, property, or the environment. 
Roles &amp; Responsibilities:
The roles and responsibilities of the A Mechanic may include but are not limited to the following:
<ul>
<li>Safe use of hand and power tools.</li>
<li>Capable of identifying potential hazards and mitigating the hazards.</li>
<li>Responsible for the proper disassembly and assembly of unit equipment.</li>
<li>Ensure proper permits have been obtained and the ability to read &amp; understand all permits.</li>
<li>Assist with the building and installation of various types of pipe hangers and supports.</li>
<li>Willing to work as a team at all times to support the project. </li>
<li>Familiar with pipe cutting and beveling operations.</li>
<li>Fully participate in health, safety, quality and environmental processes.</li>
</ul>
Experience:
<ul>
<li>Have 2 or more years of experience in industrial mechanical trades.</li>
<li>Strong experience in Boilermaker work </li>
</ul>
Skills:
<ul>
<li>Able to install piping and piping components. </li>
<li>Able to assist with performing Hydrostatic Testing </li>
<li>Able to build and install various types of pipe hangers and supports.</li>
<li>Able to cut and or bevel piping using oxyfuel, plasma, mechanical equipment. </li>
<li>Knowledge of rigging and rigging operations.</li>
</ul>
Education and requirements:
<ul>
<li>Must be willing to attend continued training applicable to job as deemed necessary by Manhattan Mechanical Services.</li>
<li>Must be able to attend one of the following MMS provided apprenticeship programs.
<ul>
<li>NCCER Boilermaker</li>
<li>NCCER Pipefitter</li>
</ul>
</li>
<li>Must be able to pass and receive TWIC card verification </li>
</ul>
Physical:
<ul>
<li>Must comply with Manhattan Mechanical Services drug and alcohol policy.</li>
<li>Able to pass physical examination, pre-employment if necessary, as required by Manhattan Mechanical Services.</li>
<li>Must be able to climb ladders and stairways.</li>
<li>Must be able to carry 50 lbs. of tools and/or materials.</li>
<li>Must be able to work at elevated heights as well as in confined spaces (towers, vessels, excavations, etc.)</li>
<li>Must be able to work extended hours on your feet on uneven surfaces (dirt, concrete, asphalt, mud, gravel, etc.)</li>
<li>Must be clean-shaven and able to work while wearing a respirator and other personal protective equipment, when required.</li>
</ul>
Safety/Environmental:
<ul>
<li>Must be able to pass applicable site-specific training.  </li>
<li>Must be able to read and understand safety instructions, signs, labels and permits in English.</li>
</ul>
Powered by JazzHR
WaiAzHrRfT

Mechanic / Boilermaker

<h3>Job Description</h3>
About the Position 
W-S Mechanical Group, a subsidiary of W-S Companies, is seeking a Journeyman Boilermaker who will perform various general manual labor tasks.   
Why work for W-S Companies? 
<ul>
<li>Health and Safety is our #1 priority 24/7/365!! </li>
<li>Competitive wages - the salary range for this position is $30 to $33 per hour based on experience  </li>
<li>401(k) after the eligibility period with company matching component </li>
<li>Opportunities for growth and development in your career </li>
<li>Positive and safe work environments </li>
</ul>
Key Responsibilities 
<ul>
<li>This is a 100% travel job</li>
<li>Locates and marks reference points for columns or plates on foundation, sing master straight edge, squares, transit and measuring tape and applying knowledge of geometry.</li>
<li>Align structures or plates sections to assemble boiler frame, plumb bobs, levels, wedges, dogs, or turnbuckles.</li>
<li>Bolts or arc-welds structures and sections together.</li>
<li>Positions drums and headers into supports or bolts or welds supports to frame.</li>
<li>Aligns water tubes, connects, and expands ends to drums and headers using tube expander.</li>
<li>Bolts or welds casing sections, uptakes, stacks, baffles and such fabricated parts as chutes, air heaters, fan stands, feeding tube, cat walks, ladders, coal hoppers and safety hatch to frame using wrenches.</li>
</ul>
What does it take to work for W-S Companies? 
<ul>
<li>Two years’ experience in pipefitting, fabricating, pump alignment and boiler operation</li>
<li>Must be able to work overtime and weekends, if required </li>
<li>Must be 18 years of age</li>
<li>Must have acceptable ID, pass a drug screen</li>
<li>High school diploma or GED</li>
<li>Possession of a TWIC card is a plus but not necessary</li>
<li>Possession of an NCCER certificate is a plus but not necessary</li>
<li>Understand verbal and written instructions, basic math, and safety skills</li>
<li>Ability to lift, push or pull objects up to 50 Ibs. on occasion</li>
<li>May reach above shoulder height and below the waist frequently</li>
<li>May stoop, kneel, or bend, on occasion </li>
<li>Move in and around confined, cluttered and uneven areas</li>
<li>Required to use hands to grasp, lift, handle, carry or feel objects frequently</li>
<li>Will climb and move in and around confined, cluttered and uneven areas while maintaining balance </li>
<li>Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions </li>
</ul>
About W-S Companies 
Founded in 1993, W-S Companies is one of the US's largest privately held, veteran-owned, and operated industrial services companies. As a leader in industrial cleaning and maintenance, mechanical and specialty services, we are a client-centric organization with employees committed to safety, integrity, and accountability. W-S Companies serves a diverse client base, including power, food and beverage, refining, utilities, chemical, manufacturing, pulp and paper, municipal, upstream, and downstream. We offer an excellent safety program, career development plans, commitment to customer service, and deep industry expertise.  
W-S Companies is committed to safety, people, service, and performance. We are committed to creating a culture where W-S is the employer of choice by empowering our employees to succeed. 
 Equal Employment Opportunity/Affirmative Action/Veteran/Disability Employer 
Powered by JazzHR
aj8mzImC2M

30 boilermaker Jobs